8U SECURITY WALL MOUNT CABINET
Part Number: 1915-3-100-08
Installation Instructions
For Your Safety: Read and understand the entire manual before installing.
Product Overview
Description of the 8U Security Wall Mount Cabinet by Kendall Howard. This document provides installation instructions and warranty information.
[Image: A 3D illustration of the Kendall Howard 8U Security Wall Mount Cabinet. It shows a rectangular metal enclosure with a front door, ventilation slots on the front and sides, and mounting points visible on the rear.]
Support and Disclaimer
Support Information
Support is available through the following methods:
- By Phone: 8:00 AM to 5:00 PM CST. 651.213.1333
- By Email: customerservice@kendallhoward.com
- By Mail: 10152 Liberty Lane, Chisago City, MN 55013
- By Web: www.kendallhoward.com
Disclaimer
Kendall Howard LLC. endeavors to make this manual accurate and complete. However, Kendall Howard LLC makes no representations or warranties of any kind, expressed or implied, about whether the use of products contained herein would infringe any rights or the correctness, accuracy, or reliability of the information contained herein or that said information covers all details, conditions, or variations. The information herein does not provide for every possible contingency in connection with the installation or use of the product(s). The information contained in this document is subject to change without notice or obligation. Kendall Howard LLC assumes no responsibility for the accuracy, completeness, or reliability of the information contained in this document. Any reliance placed on the information is therefore strictly at your own risk.
Installation Guide
Tools Needed
Phillips Screwdriver or Cordless Drill, Level
[Image: Illustrations of essential tools for installation: a Phillips head screwdriver, a cordless drill, and a spirit level.]
Installation Steps
Step 1: Cabinet Location and Initial Mounting
Identify the cabinet location. The cabinet must be hung using appropriate wall mount anchors and fasteners, selected according to the wall's requirements. Each cabinet is equipped with keyhole mounting holes. The mounting holes are spaced 16 inches on center. Install two initial mounting screws into the wall, ensuring they are not screwed in all the way.
[Diagram: Shows a wall with two screws installed 16 inches apart, with an arrow indicating "16" on Center". A close-up view of one screw shows it is not fully tightened, with the text "Do not screw in all the way."]
[Diagram: Shows the rear of the cabinet, highlighting the keyhole mounting slots designed to fit over wall-mounted screws.]
Step 2: Hanging and Securing the Cabinet
Hang the cabinet on the two mounting screws previously installed in Step 1. Secure the cabinet to the wall by utilizing the additional mounting holes located inside the cabinet.
[Diagram: Depicts the cabinet being lowered onto the wall-mounted screws using the keyhole slots.]
[Diagram: Shows the interior of the cabinet, indicating multiple pre-drilled holes for securing the cabinet firmly to the wall after it has been hung.]
Warranty Information
General Warranty Statement
Kendall Howard offers all users a Limited Warranty against defects in material and workmanship. This warranty outlines responsibilities in case of a defect and provides resolution methods.
Terms of Warranty
Kendall Howard products are warranted to be free of defects in material and workmanship. If a part or portion of the product fails to conform to the Warranty, Kendall Howard will, at its option, furnish new or factory remanufactured products for repair or replacement.
Warranty Extension and Transferability
This Warranty extends to the first purchaser for use (the "User") and is non-transferable or assignable without prior written permission from Kendall Howard.
Assignment of Warranties
Kendall Howard assigns to the User any warranties from manufacturers and suppliers of components, but makes no representations regarding their effectiveness or extent, and assumes no responsibility for matters warranted by third parties.
Drawings and Descriptions
Kendall Howard warrants that the product will conform to descriptions in final invoices, orders, proposals, and other descriptive documents. However, these are not warranties of performance or fitness for a particular purpose, as Kendall Howard does not control product use.
Warranty Claims Procedure
Within a reasonable time, not exceeding thirty (30) days after discovering a defect, the User shall contact Kendall Howard. A customer service representative will repair or replace non-conforming products without charge for materials. Labor is free if performed within thirty (30) days of purchase; otherwise, standard rates apply. Kendall Howard covers shipping costs for replacement products and return of defective items. Coverage is contingent upon Kendall Howard inspection confirming a defect and no signs of misuse.
Warranty Performance of Component Manufacturers
Kendall Howard cooperates with component manufacturers and their representatives to promptly address warranty defects, potentially utilizing third parties for repair or replacement if it leads to faster or less expensive resolution.
Items Not Covered by Warranty
This Warranty does not cover damage or defects caused by misuse, improper application, incorrect electrical connections, negligence, inappropriate operating conditions, unauthorized repair, transit damage, tampering, alterations, changes in location or use, exposure to elements, Acts of God, theft, or installation contrary to recommendations. It also excludes installation costs, circuit breaker resetting, maintenance items, labor, and shipping costs for repairs/replacements, or removal from premises. The Warranty is void if the product is altered.
Limitations
This Warranty is exclusive and in lieu of all other warranties, express or implied, including merchantability and fitness for a particular purpose. The User's sole remedy is repair or replacement. Kendall Howard's liability for property loss or damage shall not exceed the net product purchase price. Kendall Howard is not liable for indirect, special, incidental, exemplary, or consequential damages, including lost profits, business interruption, or data loss.
Miscellaneous
No salesperson, employee, or agent of Kendall Howard can alter this Warranty. Modifications require a written agreement signed by a Kendall Howard officer. The Warranty is effective upon full payment receipt and supersedes all previous warranties. Kendall Howard may supplement or change warranty terms in future offerings. If any provision becomes invalid, remaining terms stay in effect. Users must complete and return the User Information Card within thirty (30) days of receipt. This Warranty is governed by the laws of the State of Nebraska and represents the entire agreement between Kendall Howard and the User.