Installing a Washing Machine

Preparation: Remove Packing Materials

Remove all the packing materials prior to use.

• Inner Cushion: [Foam packing piece]

• Plastic Motor Base: [Plastic component for motor base]

• Cushion Bottom: [Foam packing piece]

Caution:

Remove foam before use. Use the machine without removing the foam bottom or the motor base (some models) as this can cause the machine to malfunction and damage the internal components.

Water Supply Hose Connection

Follow these steps to connect the water supply hose:

1. Remove part B from adaptor A.

   [Illustration showing the removal of part B from adaptor A]

2. Loosen 4 screws of A.

   [Illustration showing the loosening of four screws on the adaptor]

3. Turn part C for a gap of 5 mm.

   [Illustration showing the turning of component C to create a 5mm gap]

4. Tighten 4 screws of A.

   [Illustration showing the tightening of four screws on the adaptor]

5. Turn part C firmly.

   [Illustration showing the firm turning of component C]

6. Assembly B to A.

   [Illustration showing the assembly of part B onto adaptor A]

7. Connect the water supply hose to the adaptor, following the arrow.

   [Illustration showing the connection of the water supply hose to the adaptor, with an arrow indicating direction]

Drain Hose Connection

Connect the drain hose securely:

1. Insert the joint ring.

   [Illustration showing the insertion of a joint ring into the drain hose]

2. Join to a drain of Unit.

   [Illustration showing the connection of the drain hose to the washing machine's drain outlet]

3. Join them tightly.

   [Illustration showing the ensuring of a secure, tight connection of the hose]

Caution:

• Hose drain arrangement: Ensure the hose is arranged to be less than 3 meters in length.
• Beware for the folded hose: Do not allow the hose to fold.
• Do not install the hose drain underneath: Ensure the drain hose is not positioned below the machine's base level.

Leveling the Unit & Adjusting for Vibration

Proper leveling is crucial for stable operation:

1. Lift the unit and adjust the legs.

   [Illustration showing the lifting of the washing machine to access and adjust its legs]

2. Put the washer in its final position.

   [Illustration showing the placement of the washing machine in its final location]

3. Readjust legs to lock the unit in place.

   [Illustration showing the readjustment of the legs to secure the machine in place]

4. Check the machine to ensure it is level.

   Adjust height by turning clockwise.

   [Illustration showing the checking of the machine's levelness]

5. Do not install above material that could obstruct airflow or stability.

Anti-rat Panel (Applicable Models Only)

Install the anti-rat panel if your model includes one:

1. Prepare the panel.

   [Illustration showing the preparation of the anti-rat panel for installation]

2. Turn the panel side correctly.

   [Illustration showing the correct orientation of the anti-rat panel]

3. Insert panel until a lock sound is heard.

   [Illustration showing the insertion of the panel until it locks into place with an audible click]

Operation and Maintenance

Caring for Clothes Before Washing

• [Illustration showing removal of small parts and sharp objects from clothing]

  Metal objects such as coins, pins, and buckles on clothing may damage other laundry items as well as the tub.

• [Illustration depicting a warning about cloths hanging on the tub]

  Don't overload the tub. Make sure no part of the laundry is exposed outside of the tub.

• [Illustration depicting a warning about not overloading the tub]

  Take a piece of cloth in the tub. To protect socks & small pieces of cloth from falling into the drum space.

• For large items like blankets, the machine may temporarily stop working. To increase balance, try using the dry button and filling water.

Cleaning the Mesh Filter (Applicable Models Only)

Regular cleaning of the mesh filter improves water valve efficiency.

1. Use pliers to pull out the mesh filter.

   [Illustration showing the use of pliers to extract the mesh filter]

2. Use a brush to clean the filter with water.

   [Illustration showing the cleaning of the filter with a brush and water]

3. Reinsert the filter to the original position.

   [Illustration showing the reinsertion of the cleaned filter]

Caution:

• Cleaning the mesh filter helps to improve the filtering efficiency of the water valve. (When cleaning, it should be assembled)
• Should be cleaned 3 times a month.
• Do not operate without the mesh filter.

Cleaning the Filter (Applicable Models Only)

Regular cleaning of this filter helps to filter debris better.

1. Press down the upper area & remove the cover.

   [Illustration showing the pressing down of an area and removal of a cover]

2. Unlock the cover and clean.

   [Illustration showing the unlocking of a cover and cleaning the filter component]

3. Reinsert the filter to the original position.

   [Illustration showing the reinsertion of the filter into its original position]

Caution:

• Regular cleaning of the filter will help to filter the debris better.
• Should be cleaned every week.

Cleaning the Basket Spin

Instructions for using special cleaning cycles:

• [POWER] Press Power: To turn the machine on.

  [Illustration of the Power button]

• [ECO TUB CLEAN] Press Eco Tub Clean: To activate the self-cleaning cycle.

  [Illustration of the Eco Tub Clean button]

• [START/PAUSE] Press Start: To begin the selected cycle.

  [Illustration of the Start/Pause button]

Caution:

• Eco Tub Clean must be used only when the machine is empty. If there is fabric, it can damage the fabric or cause problems with the machine.
• When the Eco Tub Clean signal is displayed, a wash program is required. If you do not use the wash program, the alarm will still be displayed for 5 cycles. Using the Eco Tub Clean cycle immediately will resolve the alarm.