Smart Color Night Light

Product Overview

The Smart Color Night Light is an all-in-one solution featuring colored lights, a human motion sensor, and an illuminance sensor. Experience a new level of smart living and elevate your home with enhanced control, convenience, and efficiency.

Main Features

• Matter-Certified
• Privacy & Security
• Voice Control and Remote Control
• Smart Lighting Effect
• Adapter USB Powered Design

Product Details

Diagram showing a square with a circle inside, labeled 'Illumination Sensor'. Diagram showing a rectangular device with a small circle on top, labeled 'Set Pinhole Motion Sensor'. Diagram showing a rectangular port, labeled 'USB Interface'. Diagram showing a light bulb emitting colored light, labeled 'Color Light'. Diagram of a standard electrical plug, labeled 'Power Adapter'.

LED Status

Set Up with Matter

This Matter certified device can be paired to any Matter certified ecosystem.

Note:

1. Make sure your Matter controller firmware version and corresponding mobile app version are up to date.
2. Ensure firmware is updated for your Smart Color Night Light through the 3R-MATTER App (see "Set Up with 3R-MATTER APP"). Then add the night light to other Matter controllers through multi-admin, or factory reset the night light and pair it to other Matter controllers.
3. To factory reset the Smart Color Night Light, use a pin to press through the pinhole for 5 seconds until it turns red, then release. The LED light flashes yellow 3 times and turns solid white, indicating it is in pairing mode.

Set Up with 3R-MATTER APP

1. Download and install the 3R-MATTER app from the App Store/Google Play Store on your phone. Turn on Bluetooth on your phone and ensure it has a stable internet access through a 2.4GHz WiFi network.
2. Power up the Smart Color Night Light. The LED light flashes yellow 3 times and turns solid white, indicating it is in pairing mode. If it is not in pairing mode, use a pin to press through the pinhole for 5 seconds until it turns red, then release.
3. In the 3R-MATTER app, tap the '+' icon in the upper right corner, scan the MATTER QR code on your Smart Color Night Light, and follow the in-app instructions to complete setup.
4. Long press the light icon to enter the night light device page, then tap "Check Updates" for firmware OTA (Over-The-Air). Important: Stay on this page during OTA. Exiting requires a restart for OTA.
5. Tap "Link with Matter Enable Services" to add the night light to another Matter controller through multi-admin.

Set Up with Apple Home

Compatibility:

• iOS system: Version 16.6 or later.
• Matter-supported Controller: Home Pod, Home Pod mini, or Apple TV.

1. Launch your Home App. Tap '+' and then tap "Add or Scan Accessory" to add a new device.
2. Scan the MATTER QR code on your device.
3. Choose a location and set a name for your device.
4. You can now check your device on the Device list, turn it on/off, and change its color using the Home app. You can also create automations using the light sensor, occupancy sensor, and color night light features.
5. To connect the device to another MATTER certified ecosystem app, go to the app of the first ecosystem to generate a new setup code. Navigate to the Device Settings page, scroll down, tap "Turn On Pairing Mode", and then "Copy Code". Launch the app of another MATTER certified ecosystem, follow the setup instructions to enter the setup code, and complete the setup.

Set Up with Alexa

Alexa app version:

• Android: 2.2.542657.0 or later
• iOS: 2.2.575623.0 or later

Partial functionality is supported on Amazon Echo; complete features will be available after a platform update.

1. Set up your Amazon Alexa Speaker and connect your phone to your WiFi router.
2. Power up the night light. The LED light flashes 3 times rapidly in yellow and then turns white. If it is not in pairing mode, press the pinhole with a pin for 5 seconds to put the night light into pairing mode again.
3. Open your Alexa app, sign in, and tap the '+' icon in the upper right corner. Follow the instructions to add the device. Ensure the night light and the Echo Speaker are connected to the same WiFi router.
4. You can create routines with the night light and the motion sensor.

Set Up with Google Home

Compatibility:

• Google Home App version: Android: 3.9.1.6 or later, iOS: 3.9.104 or later

1. Set up your Google Home Speaker in your Google Home app and connect your phone to your WiFi router.
2. Power up the night light. The LED light flashes 3 times rapidly in yellow and then turns white. If it is not in pairing mode, press the pinhole with a pin for 5 seconds to put the night light into pairing mode again.
3. A notification "Set up your device" will pop up in your Google Home app. Tap "Scan QR code" and follow the instructions to add the night light.
4. You can create automations with the night light.
5. To connect the night light to another Matter ecosystem app, open the app of the first ecosystem the night light has already been paired with. Open the device page, tap the settings icon in the upper right, then tap "Linked Matter apps & services", and follow the app instructions to complete the setup.

Set Up with Samsung SmartThings

Compatibility:

• SmartThings App version 1.8.10.21 or later
• iOS SmartThings App version 1.7.09 or later
• Matter-supported Controller: SmartThings Hub V2 & V3, Aeotec Smart Home Hub

1. Launch your SmartThings App. Tap '+' to "Add device", then choose "Matter".
2. Scan the QR code on your device.
3. Select a hub to connect your device. (In iOS, you need to "Add to iCloud Account", then create an "Accessory Name", then "Continue").
4. You can now check your device on the Device list, turn it on/off, and change its color in the app.

FCC regulatory conformance

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Important announcement: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

RF Exposure

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Limited Warranty

For limited warranty, please visit www.3reality.com/devicesupport.

For customer support, please contact us at info@3reality.com or visit www.3reality.com.

For help and troubleshooting related to Amazon Alexa, visit the Alexa app.