LED Desk Lamp with Wireless Charging Function

Getting Started

Step 1: Setup

Unfold the lamp to its standing position. Plug the power cord into the base of the lamp. Then, plug the USB or AC adapter into a power outlet.

Step 2: Operation

To turn the lamp on, tap the [power icon]. To adjust the brightness, use the [arrow icons]. To change the light color, tap the [light icon] to cycle through 4 color options.

Step 3: Wireless Charging

To use the wireless charging function, place a compatible phone onto the wireless charging pad located on the lamp base. The indicator light will turn on when the phone is charging. The light will turn off when the phone is removed.

Color Options

• Natural White (4500K)
• Cool White (5600K)
• Warm White (2800K)
• Soft White (3400K)

Wireless Charging Compatibility

*Wireless charging compatible phones with built-in wireless charging receivers include, but are not limited to:

• iPhone 8, 8 Plus, X, XS, XR, XS Max, 11, 11 Pro, 11 Pro Max
• Samsung S6, S6 Edge, S7, S8, S8+, S9, S9+, Note 8, Note 9
• LG V40 ThinQ, G7 ThinQ, V35 ThinQ
• Google Pixel 3, Pixel 3XL
• Sony XZ3, XZ2, XZ Premium
• Nokia 8, Nokia 9, Nokia 1520

Safety Information & Cautions

CAUTION: Do not use chemical solvents or harsh abrasives to clean the lamp, as damage may occur.

WARNING: To reduce the risk of fire, electric shock, or personal injury, do not install this lighting system in a wet location.

CAUTION: Keep the lamp away from materials that may burn.

CAUTION: Do not stare directly into the lamp light, as this could be damaging to your eyes.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.