IMPORTANT SAFETY INFORMATION
Thank you for purchasing this REVOLT item. Please read these instructions carefully before first use and store them in a safe place for future reference.
Safety Information
- Keep smaller accessories out of the reach of children.
- Do not store batteries in hot environments (e.g., near open flames or heating devices).
- Children must be supervised by an adult when operating the vehicle. The vehicle should always remain within the line of sight of the driver (or instructor).
- Do not recharge non-rechargeable batteries. When installing or changing batteries, ensure correct polarity. Do not mix old and new batteries or different types.
- Do not short circuit battery terminals.
- If not using the vehicle for at least 10 days, discharge the battery to 40%-50% to prolong its lifespan.
- Use only the provided charging cable. Disconnect the charging cable before cleaning.
- Regularly inspect the charging cable, plug, socket, and accessories for damage. Discontinue use immediately if damaged.
- After use, switch off the vehicle and remote control, and remove remote control batteries.
- Keep the packaging and manual for future reference.
Repair and Maintenance
- Clean the product regularly with a clean, soft cloth.
- Avoid exposing the product to direct sunlight or heat.
- Do not submerge the product in water ?, as this may damage electrical components.
PRODUCT SPECIFICATIONS
Remote Control Vehicle
| Attribute | Specification |
|---|---|
| Weight | 321.8g |
| Dimensions | 16.5 x 16 x 7cm / 6.5" x 6.3" x 2.75" |
| Remote control range | approx. 30 meters / 100 Feet |
| Charging time | approx. 90 min |
| Operating time | approx. 15 min |
| Battery | 3.7V 500mAh rechargeable battery (included) |
Remote Control
| Attribute | Specification |
|---|---|
| Operating frequency | 2.4 GHz |
| Battery Requirements | 2x AA 1.5V batteries (not included) |
CONTENTS
- 1x Light stunt car
- 1x USB Charging Cable
- 1x Remote Control
BASIC OPERATING INSTRUCTIONS
Remote Control Layout:
- Left Joystick
- Right Joystick
- OFF/ON Switch
PAIRING
- Switch the vehicle power to "ON".
- Switch the remote control to "ON".
- The vehicle and remote control will pair automatically when both are "ON".
MOVING THE VEHICLE
- Forward: Push both joysticks upward [↑↑] to move forwards.
- Backward: Push both joysticks downward [↓↓] to move backwards.
- Left steering: Push the right joystick upwards [→↑] to turn left.
- Right steering: Push the left joystick upward [←↑] to turn right.
- 360° left rotation: Push the left joystick down [↓] and the right joystick up [↑] for a 360° left rotation.
- 360° right rotation: Push the left joystick up [↑] and the right joystick down [↓] for a 360° right rotation.
INSERTING THE BATTERIES
Remote Control
- Check the ON/OFF switch is in the "OFF" position.
- Use a screwdriver ? to loosen the screw.
- Remove the battery cover.
- According to the polarity indicated inside the remote control, insert 2x AA 1.5V batteries ?? into the battery compartment.
- Put the battery cover back and tighten the screw.
Remote Control Car
- Check the ON/OFF switch is in the "OFF" position.
- Use a screwdriver ? to loosen the screw.
- Remove the battery cover.
- Install the battery as indicated in the picture on the right: Connect the rechargeable 3.7V battery ? in the battery pack.
- Put the battery cover back and tighten the screw.
Note: If a breakdown occurs, remove the battery for one minute, then reinstall it. If the issue persists, replace the battery. Battery installation should be done by adults.
CHARGING THE BATTERIES
Vehicle Charging
Connect the USB charger to a USB output on a computer or AC/DC adapter. Then, insert the car charger plug into the vehicle's charging port [?].
- A full charge takes approximately 90 minutes.
- During charging, the LED indicator turns red.
- When charging is complete, the LED indicator turns off.
Regularly inspect the toy, battery charger, charging cable, connectors, and other components for signs of damage. In case of any damage, discontinue use and send the parts for repair.
Important Charging Precautions
- In case of abnormal responses such as suspicious smell, noise, or smoke from the charger, remove the power supply immediately.
- Please recharge using the dedicated USB charging cable delivered with the product. Never use broken charging cables or cables from other products.
- Do not recharge swelling, leaking, or broken batteries.
- Do not overcharge the battery. Stop charging when the battery is fully recharged.
- Do not recharge the battery near flammable materials (carpet, wood floor, furniture, etc.) or conductive objects. While recharging, keep the battery within line of sight.
Caution
- Do not touch moving wheels ⚙️ to avoid entanglement and injury to yourself or damage to the car.
- Do not play by the road or in dangerous places that could cause accidents.
- Do not use this vehicle near water ?.
- Before using the car, ensure the car battery cover screws are tightened. Failure to tighten may cause water damage to the vehicle.
- If recharging is necessary, please take the battery out of the remote control vehicle (if applicable).
Warning!
This product must be assembled and used under the direct supervision of an adult.
This product contains small components that present a choking hazard if swallowed; it is not suitable for children under 5 years of age.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Compliance Information
"This device complies with FCC radiation exposure limits set forth for general population (uncontrolled exposure). This device must not be collocated or operating in conjunction with any other antenna or transmitter."
Declaration of Conformity Inserts: "Hereby, GuangDong Syma model drone Industrial co, Itd, declares that this drone is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.”
A copy of the full DoC is attached.
Manufacturer Information
SYMA MODEL AIRCRAFT INDUSTRIAL CO.LTD
Address: Intersection of Xingye Road No. 2 (West side) and Xingye Road (North side), Laimei Industrial Park, Chenghai District, Shantou, Guangdong Province, China
Sales hotline: 0754-86980668, After-sales hotline: 0754-86395095
Fax: 0754-86395098 Zip code: 515800
The manufacturer reserves the right to the final interpretation of this instruction manual.
