METOD Cabinet Assembly Instructions

Safety Warning

⚠️ WARNING! Serious or fatal crushing injuries can occur from furniture falling down. To prevent this furniture from falling down, it must be used with the wall attachment device(s) provided.

Screws(s) and plug(s) for the wall are not included. Assess the suitability of the wall to ensure that it will withstand the forces generated. Use screw(s) and plug(s) suitable for your walls and the intended load. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.

Parts List

12x Dowel (Part No. 112996)
12x Cam Lock (Part No. 113434)
10x Screw (Part No. 10046940)
4x Screw (Part No. 10035574)
6x Bolt (Part No. 10055570)
12x Dowel (Part No. 101351)
2x Bracket (Part No. 124526)
2x Bracket (Part No. 10036383 / 10039201)
2x Mounting Plate (Part No. 10039571)
1x Bag of Nails (Part No. 319503)
2x Wall Bracket (Part No. 10049278)
2x Wall Bracket (Part No. 124518 / 124519)
2x Bracket (Part No. 103693)
2x Rail (Part No. 10116456 / 10116457)

Assembly Steps

Step 1: Prepare Side Panels

Insert 12x dowels (112996) into the pre-drilled holes on the two side panels.

[Diagram shows dowels being inserted into holes on two vertical panels.]

Step 2: Attach Mounting Plates

Attach two mounting plates (10049278) to the side panels using 2x screws (10046940) for each plate. Ensure correct orientation as indicated by the diagram.

[Diagram shows mounting plates being attached to the side panels with screws.]

Step 3: Connect Base Panel

Connect the two side panels to the base panel using 6x dowels (101351).

[Diagram shows the base panel being connected to the side panels with dowels.]

Step 4: Secure Base Panel

Insert 6x cam locks (113434) into the designated holes on the base panel and turn them clockwise [arrow symbol] to secure the side panels.

[Diagram shows cam locks being inserted and turned to lock the panels together.]

Step 5: Insert Back Panel

Slide the back panel into the grooves on the side and base panels.

[Diagram shows the back panel being slid downwards into grooves.]

Step 6: Attach Top Panel

Attach the top panel to the side panels using 6x dowels (101351).

[Diagram shows the top panel being placed onto the side panels, aligning with dowels.]

Step 7: Secure Top Panel

Insert 6x cam locks (113434) into the designated holes on the top panel and turn them clockwise [arrow symbol] to secure the top panel.

[Diagram shows cam locks being inserted and turned to lock the top panel.]

Step 8: Check Squareness and Attach Back Support

Check that the cabinet is square (all corners are 90°). A diagram shows a corner check and a 'no' symbol ❌ over a unit that is not square.

Attach the back panel support rail using 1x nail (319503) at a 90° angle to the back edge of the cabinet.

[Diagram shows a hand holding a nail and hammer, with an arrow indicating placement on the back edge.]

Step 9: Attach Additional Back Support

Attach another back panel support rail to the opposite side using 1x nail (319503).

[Diagram shows a nail being inserted into the back edge on the other side.]

Step 10: Attach Back Panel Brackets

Attach two brackets (10036383 / 10039201) to the back of the cabinet using 2x screws (319503) for each bracket.

[Diagram shows brackets being screwed onto the back panel.]

Step 11: Attach Internal Shelf Rail

Attach the internal shelf support rail using 2x screws (10046940).

[Diagram shows the rail being screwed into the inside of the cabinet side panels.]

Step 12: Attach Cabinet Mounting Plates

Attach two cabinet mounting plates (10039571) to the cabinet sides. The diagram shows a sliding motion [arrow symbol] for attachment.

[Diagram shows mounting plates being attached to the cabinet sides.]

Step 13: Attach Wall Mounting Hardware

Attach the necessary wall mounting hardware to the cabinet. This includes brackets (124526, 103693) and rails (10116456 / 10116457). Follow the diagrams for correct placement and adjustment.

[Diagrams show various brackets and rails being attached to the cabinet sides and back, with adjustment mechanisms.]

Step 14: Wall Mounting

IMPORTANT: Secure the cabinet to the wall using appropriate fixings. The diagrams show attaching the cabinet to wall brackets (10049278, 124518 / 124519) using screws (10035574) and bolts (10055570). Ensure the wall is suitable and use fixings appropriate for your wall type and the load. Consult a professional if unsure.

[Diagrams show the cabinet being mounted to the wall using brackets and screws/bolts. A 'no' symbol ❌ is shown for incorrect installation.]

	METOD Cabinet Assembly Instructions Comprehensive assembly instructions for the IKEA METOD cabinet frame (AA-2238535-6). This guide includes detailed step-by-step instructions, a complete parts list, and essential safety warnings regarding furniture tip-over prevention. All visual diagrams have been replaced with descriptive text for accessibility.
	IKEA METOD Cabinet Assembly Instructions Comprehensive assembly guide for the IKEA METOD cabinet, detailing step-by-step instructions, safety warnings, and parts identification. Ensure proper wall anchoring for safety.
	IKEA METOD Cabinet Assembly Instructions Comprehensive assembly instructions for the IKEA METOD cabinet, including safety warnings, parts list, and step-by-step guidance for building and securely mounting the unit to the wall.
	IKEA METOD Base Cabinet Assembly Instructions & Guide Detailed assembly instructions and safety guide for the IKEA METOD base cabinet. Learn how to safely build and install your METOD cabinet with step-by-step guidance and parts list.
	METOD Kitchen Cabinet Assembly Instructions Step-by-step guide for assembling the IKEA METOD kitchen cabinet, including safety warnings, parts list, and installation procedures.
	IKEA METOD Corner Base Cabinet Assembly Instructions A comprehensive guide for assembling the IKEA METOD corner base cabinet, featuring detailed steps, safety warnings, and a parts list. This manual ensures proper installation of your kitchen unit.
	METOD Cabinet Assembly Instructions Comprehensive assembly guide for the IKEA METOD cabinet system, detailing step-by-step instructions, parts identification, and crucial safety warnings for secure installation.
	METOD Reinforced Ventilated Top Rail Assembly Instructions A comprehensive guide to assembling and installing the IKEA METOD reinforced ventilated top rail. This document details the necessary hardware, step-by-step instructions, and visual aids for proper installation of this kitchen cabinet component.