Living Spaces Luca Bunk Bed & Trundle Assembly Instructions
This document provides assembly instructions for the Living Spaces Luca Panel/Bunk/Daybed Trundle and the Luca Twin-Twin Bunk Bed.
Luca Panel/Bunk/Daybed Trundle Assembly
Item No: Y2103W-348, Y2103B-348, Y2103G-348
SKU: 314671, 314583, 314627
Estimated assembly time: 15 minutes for 2 people.
Part List
| Part | SKU# | Image Description | Description | QTY |
|---|---|---|---|---|
| A | 1996-A-W: (White) 1996-A-B: (Blue) 1996-A-G: (Grey) | [Illustration of a front panel with vertical slats] | Front | 1 |
| B | 1996-B-W: (White) 1996-B-B: (Blue) 1996-B-G: (Grey) | [Illustration of a back rail panel] | Back rail | 1 |
| C | 1996-C-W: (White) 1996-C-B: (Blue) 1996-C-G: (Grey) | [Illustration of a side rail panel] | Side rails | 2 |
| D | 1996-D | [Illustration of multiple wooden slats] | Slats | 1 |
Hardware List
| Part | SKU# | Image Description | Description | QTY |
|---|---|---|---|---|
| 1 | 1996-1(8) | [Illustration of a bolt and nut] | Bolt and nut M8*70mm | 8 |
| 2 | 1996-2(2) | [Illustration of a bolt] | Bolts M4*20mm | 2 |
| 3 | 1996-3(4) | [Illustration of a dowel] | Dowel Ø8*40mm | 4 |
| 4 | 1996-4(14) | [Illustration of screws] | Screws 8#*30mm | 14 |
| 5 | 1996-5(1) | [Illustration of a handle] | Handle | 1 |
| 6 | 1996-6(1) | [Illustration of an allen key] | Allen key 60*22*4mm | 1 |
Note: Screwdriver will be prepared by yourself. The hardware is located in the packing item.
NOTE: MUST TIGHTEN SCREWS PERIODICALLY. WITH USE SCREW MAY BECOME LOOSE. CHECK TIGHTNESS OF ALL SCREWS EVERY 6-8 WEEKS.
CLEANING INSTRUCTIONS:
After assembly, clean and polish the completed parts if necessary with soft cloth and industrial recognized furniture polish.
Detail View
[Isometric view of the assembled trundle bed frame, with labels pointing to parts A (front), B (back), C (side rails), and D (slats).]
Assembly Steps
STEP 1:
Firstly, please locate Side Rail (C) to Front (A) and Back (B) by dowel (3). Fasten Side Rail (C) by Bolt+nut (1). BUT NO TIGHTEN.
[Diagram showing two side rails (C) being attached to the front (A) and back (B) panels using dowels (3) and then secured with bolt+nut (1). The diagram indicates that the bolt+nut should not be fully tightened at this stage. Hardware quantities indicated: 8x Bolt+nut (1), 4x Dowel (3). An allen key (6) is shown separately.]
STEP 2:
Please fasten slats (D) by screw (4) into corresponding holes.
[Diagram showing the bed frame with slats (D) being attached using screws (4). Hardware quantity indicated: 14x Screw (4).]
STEP 3:
Assemble the handle (5) into Front (A).
[Diagram showing the handle (5) being attached to the front panel (A) using hardware (2). Hardware quantities indicated: 2x Hardware (2), 1x Handle (5).]
That's it! You've finished assembling your item. Thank you!
Luca Twin-Twin Bunk Bed Assembly
Item No: Y2103W-340/341/342, Y2103B-340/341/342, Y2103G-340/341/342
SKU: 314663/314664/314665, 314575/314576/314577, 314619/314620/314621
Estimated assembly time: 30 minutes for 2 people.
IMPORTANT SAFETY INFORMATION
PLEASE TAKE TIME TO READ ALL INSTRUCTIONS AND WARNINGS BEFORE BEGINNING ASSEMBLY!
SAFETY WARNING
Our Bunk Beds have been tested by an Independent Laboratory and are certified to be in compliance with: ASTM F-1427, “Standard Consumer Safety Specification for Bunk Beds” and U.S. Government specifications 16 Code of Federal Regulations, parts 1213 and 1513.
SAFETY WARNINGS
- Follow the information on the warnings attached to the upper bunk end structure and on the carton. Do not remove this label.
- Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls.
- Top surface of mattress must be at least five inches (127mm) below the upper edge of top guard rails.
- Do not allow children less than six years of age to use the upper bunk.
- Periodically, check and ensure that the guardrail, ladder and other components are in their proper position, free from damage and that all connectors are tight.
- Do not allow horseplay on or under the bed and prohibit jumping on the bed and ladder.
- Prohibit more than one person on upper bunk.
- Always use the ladder or Stairway Chest for entering and leaving the upper bunk.
- Do not use substitute parts. Contact Living Spaces for replacement parts.
- Use of a night-light may provide added safety precautions for a child using the upper Bunk.
- If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall. (This applies only to bunk beds without two full-length guardrails.)
- Always use guardrails on both long sides of the upper bunk.
- The use of water or sleep flotation mattress is expressly prohibited.
- Keep these instructions for future reference.
STRANGULATION HAZARD
- Never attach or hang items to any part of the bunk bed that are not designed for use with the bed for example, but not limited to hooks, belts and jump ropes.
SIZE OF MATTRESS AND FOUNDATION
- Use only mattress which is 75" long and 37.5- 38.5" wide on upper bunk, lower bunk of Twin bed.
- Ensure thickness of mattress does not exceed 6" and mattress is at least 5" below upper edge of guardrails.
- Ensure thickness of mattress does not exceed 6" for lower bunk.
REPLACEMENT PARTS
Replacement parts, including additional guardrails, may be requested from Living Spaces, usually at a cost.
KEEP ALL INSTRUCTIONS INCLUDED WITH YOUR BEDROOM COMPONENTS FOR FUTURE REFERENCE.
Ladder and Stairway Chest Options
Always use the ladder or Stairway Chest for entering and leaving the upper bunk. You will buy ladder/Stairway as options.
[Diagram showing two views of the bunk bed: one with a ladder attached to the side, and another with a stairway chest attached to the side.]
Part Lists
BOX 1-TW /TW + TW /FL UPPER ENDS/SLATS BUNK BED
| Part | SKU# | Image Description | Description | QTY |
|---|---|---|---|---|
| A | 1987TT-A-W: (White) 1987TT-A-B: (Blue) 1987TT-A-G: (Grey) | [Illustration of an upper end panel with vertical slats] | Upper Ends | 2 |
| J | 1987TT-J | [Illustration of multiple wooden slats] | Slats | 1 |
BOX 2: TW /TW LOWER ENDS/SLATS BUNK BED
| Part | SKU# | Image Description | Description | QTY |
|---|---|---|---|---|
| B | 1987TT-B-W:(White) 1987TT-B-B:(Blue) 1987TT-B-G:(Grey) | [Illustration of a lower end panel with vertical slats] | Lower Ends | 2 |
| J | 1987TT-J | [Illustration of multiple wooden slats] | Slats | 1 |
BOX 3- TW /TW SIDE/GUARD RAILS BUNK BED
| Part | SKU# | Image Description | Description | QTY |
|---|---|---|---|---|
| C | 1987TT-C-W: (White) 1987TT-C-B: (Blue) 1987TT-C-G: (Grey) | [Illustration of an upper rail panel] | Upper Rails | 2 |
| D | 1987TT-D-W: (White) 1987TT-D-B: (Blue) 1987TT-D-G: (Grey) | [Illustration of a guard rail panel] | Guard rails | 4 |
| E | 1987TT-E-W: (White) 1987TT-E-B: (Blue) 1987TT-E-G: (Grey) | [Illustration of a guard rail support piece] | Guard rail supports | 2 |
| F | 1987TT-F-W: (White) 1987TT-F-B: (Blue) 1987TT-F-G: (Grey) | [Illustration of a lower rail panel] | Lower rails | 2 |
Hardware List of Twin-Twin Bunk Bed
| Part | SKU# | Image Description | Description | QTY |
|---|---|---|---|---|
| 1 | 1987TT-1(16) | [Illustration of a bolt and nut] | Bolt and nut M8*90mm | 16 |
| 2 | 1987TT-2(6) | [Illustration of bolts] | Bolts M8*35mm | 6 |
| 3 | 1987TT-3(8) | [Illustration of screws] | Screws Ø6.5*83mm | 8 |
| 4 | 1987TT-4(16) | [Illustration of dowels] | Dowel Ø8*40mm | 16 |
| 5 | 1987TT-5(28) | [Illustration of screws] | Screws 8#*30mm | 28 |
| 6 | 1987TT-6(4) | [Illustration of metal dowels] | Metal dowel Ø10*100mm | 4 |
| 7 | 1987TT-7(1) | [Illustration of an allen key] | Allen key 60*22*4mm | 1 |
Note: Screwdriver will be prepared by yourself. THE HARDWARE IS LOCATED IN THE PACKING ITEM
NOTE: MUST TIGHTEN SCREWS PERIODICALLY. WITH USE SCREW MAY BECOME LOOSE. CHECK TIGHTNESS OF ALL SCREWS EVERY 6-8 WEEKS.
CLEANING INSTRUCTIONS:
After assembly, clean and polish the completed parts if necessary with soft cloth and industrial recognized furniture polish.
Detail View
[Isometric view of the assembled twin-twin bunk bed, with labels pointing to parts A (upper ends), B (lower ends), C (upper rails), D (guard rails), E (guard rail supports), F (lower rails), and J (slats).]
Assembly Steps
STEP 1:
Assembly Rail (C): Please locate two rails (C) to Ends (A) by Dowel (4) firstly, and then fasten gradually by Bolt+nut (1) BUT NO TIGHTEN.
Assembly Guard Rail (D): Please locate Guard rails (D) to Ends (A) by Dowel (4) firstly, and then fasten gradually by Bolt (3). Pay attention to rail orientation.
[Diagram showing the initial assembly of the bunk bed frame. Two rails (C) are attached to end panels (A) using dowels (4) and bolt+nut (1). Guard rails (D) are attached to end panels (A) using dowels (4) and bolts (3). Hardware quantities indicated: 12x Dowel (4), 8x Bolt+nut (1), 8x Bolt (3). A note about rail orientation is present.]
STEP 2:
Assemble the Guard Rail Supports (E) to Upper bed frame by Bolt (2).
[Diagram showing guard rail supports (E) being attached to the upper bed frame using bolts (2). Hardware quantity indicated: 6x Bolt (2).]
STEP 3:
Please fasten slats (J) by screw (5) into corresponding holes.
[Diagram showing the slats (J) being attached to the bed frame using screws (5). Hardware quantity indicated: 14x Screw (5).]
STEP 4:
Insert dowel (4) to Ends (B) firstly, then the Rails (F) are fastened by Bolt+nut (1). Pay attention to rail orientation.
[Diagram showing the lower section of the bunk bed being assembled. Dowels (4) are inserted into end panels (B), and then lower rails (F) are attached using bolt+nut (1). Hardware quantities indicated: 4x Dowel (4), 8x Bolt+nut (1). A note about rail orientation is present.]
STEP 5:
Please fasten slats (J) by screw (5) into corresponding holes.
[Diagram showing the slats (J) for the lower bunk being attached using screws (5). Hardware quantity indicated: 14x Screw (5).]
STEP 6:
Assemble the upper bunk to lower bunk by Metal dowel (6).
[Diagram showing the upper bunk section being connected to the lower bunk section using metal dowels (6). Hardware quantity indicated: 4x Metal dowel (6).]
Combining with Ladder (Option 1)
Attaching the ladder to Guard rail by Screw. (This hardware is placed in ladder box).
[Diagram showing a close-up of a ladder being attached to the bunk bed guard rail using a screw.]
Combining with Stairway Chest (Option 2)
Please attach the Stairway Chest to Bunk bed by metal bracket and screw (are placed in Stairway box).
[Diagram showing a stairway chest being attached to the bunk bed using metal brackets and screws. Another diagram shows the recommended placement of the stairway chest next to the bunk bed side and wall.]
Option 1: [Illustration of bunk bed with ladder]
Option 2: [Illustration of bunk bed with stairway chest]
That's it! You've finished assembling your item. Thank you!
