Keiser M3i FTMS Indoor Group Cycle - Parts Identification
This document provides a detailed breakdown of the components for the Keiser M3i FTMS Indoor Group Cycle, covering models 5507BBC and 5507XXC. It serves as a visual guide for identifying and referencing individual parts.
Commonly Serviced Components
The following components are frequently accessed during service:
- Stretch Pad (550877)
- Dumbbell Holder (550878B, X)
- Drill Fixture Kit - DH (550787B)
- Shim - Bottom Bracket Shell (550885B)
- Tool Kit - M3 (550887)
- Tool - Bearing Drive (554501)
- Kit - Base Stabilizer - Retrofit (990839)
- Kit - Tool - Rivet Nut (990840)
Parts List and Diagram Reference
The following table lists the parts associated with the assembly, with corresponding item numbers referenced in the diagram. Dimensions are provided in inches, with millimeters in brackets.
| Item No. | Qty. | Part No. | Title |
|---|---|---|---|
| 1 | 1 | 9062 | SCREW-CRFCHMS 10-32 X 1/2 SS |
| 2 | 1 | 9082 | WASHER - BONDED #10 SS |
| 3 | 7 | 9253 | SCREW - CRPHMS #10-32 X 3/16 SS |
| 4 | 2 | 9261 | SCREW - CRPHMS 10-32 X 3/8 SS |
| 5 | 2 | 9279 | SCREW - SBHTS-TF 5/16-18 X 3/4 ZP |
| 6 | 1 | 9287 | SCREW - CRPHTS 10-24 X 3/4 SS |
| 7 | 3 | 9303 | SCREW - CRPHTCS-T25 4 X 3/8 SS |
| 8 | 1 | 9304 | SCREW - CRFCS-PLASTITE 4-20 X 3/8 SS |
| 9 | 3 | 9333 | SCREW - SBHTS-TF 5/16-18 X 1 ZP |
| 10 | 2 | 9344 | WASHER - FW-USS 5/16 ZP |
| 11 | 4 | 9369 | WASHER - THICK-ACFT 0313 SS |
| 12 | 4 | 9384 | WASHER - FW-ACFT 7/16 SS |
| 13 | 2 | 9391 | WASHER - FW-ACFT 1/4 SS |
| 14 | 2 | 9397 | WASHER - BONDED 5/16 SS |
| 15 | 7 | 9500 | SCREW - SHCS M6x1 X 10 SS |
| 16 | 4 | 9501 | SCREW - SHCS M6x1 X 16 SS |
| 17 | 5 | 9502 | SCREW - SHCS M6x1 X 20 SS |
| 18 | 1 | 9508 | NUT-HN M6X1 SS |
| 19 | 4 | 9509 | NUT - HELN M6X1 ZP |
| 20 | 2 | 9511 | SCREW - HHCS M8X1.25 X 16 ZP |
| 21 | 2 | 9516 | SCREW - SBHCS M8x1.25 X 45 SS |
| 22 | 2 | 9519 | NUT-HAN-HC M8x1.25 SS |
| 23 | 2 | 9524 | SCREW - SBHCS M8x1.25 X 16 SS |
| 24 | 1 | 9525 | SCREW - HHCS M6X1 X 45 SS |
| 25 | 1 | 9532 | SCREW-CRPHMS 4-40 X 3/8 SS |
| 26 | 4 | 9536 | SCREW - SHCS M8x1.25 X 16 SS |
| 27 | 1 | 9546 | SCREW-CRPHMS 10-32 X 5/16 SS |
| 28 | 1 | 9982 | NUT-HEAVY SQ. 3/8-16 SS |
| 29 | 3 | 105423 | BUMPER - MOLDED GLIDE |
| 30 | 1 | 105550 | THREAD SEALANT - LOCTITE 242 |
| 31 | 2 | 115054 | PLUG-2 IN SQ-KEISER |
| 32 | 1 | 215502 | RETAINING RING- 1.70 OD |
| 33 | 1 | 505063 | PIN - HANDLEBAR-1/4 X 1-3/4 |
| 34 | 6 | 505068 | BUSHING - 4 PIECE |
| 35 | 2 | 505480 | RIVET - 1/4 X 3/4 REM PLUG |
| 36 | 1 | 543080 | SPACER - BEARING-FLYWHEEL |
| 37 | 2 | 543091 | HOSE - SPACER-LONG |
| 38 | 1 | 550804 | PULLEY - IDLER |
| 39 | 1 | 550842 | BOXING KIT - M3-FTB HB |
| 40 | 2 | 550847 | PLUNGER KNOB |
| 41 | 1 | 550871 | BACK-DISPLAY-COMPUTER-BT |
| 42 | 1 | 550888 | COMPUTER - BL-BT-FTMS |
| 43 | 1 | 550900 | FRAME - MAIN |
| 44 | 1 | 550901 | FRAME - BASE |
| 45 | 1 | 550911 | CKT BRD - PICKUP |
| 46 | 1 | 550917 | HANDLEBAR - NEUTRAL-ADJUSTABLE |
| 47 | 1 | 550922 | SLIDE MT - TUBE |
| 48 | 1 | 551751 | YOKE - MAGNET HOLDER |
| 49 | 1 | 553101 | TUBE - WHEEL GUARD-270 |
| 50 | 1 | 554500 | SUPPORT - MAGNET HOLDER |
| 51 | 2 | 554997 | THREADED INSERT - 3/4 X 1/2 SS |
| 52 | 1 | 555002 | GIB - SEAT |
| 53 | 1 | 555003 | FLYWHEEL |
| 54 | 1 | 555004 | HUB - FLYWHEEL |
| 55 | 1 | 555005 | HUBCAP - FLYWHEEL |
| 56 | 1 | 555008 | MAGNET COVER |
| 57 | 1 | 555009 | SLIDER - SEAT |
| 58 | 1 | 555011 | PLATE - MAGNET SUPPORT |
| 59 | 1 | 555012 | PULLEY-330MM |
| 60 | 1 | 555017 | MOUNT-DISPLAY-COMPUTER |
| 61 | 4 | 555022 | NUT-HAN-HC-7/16-20 SS |
| 62 | 4 | 555023 | SCREW - HHCS-7/16-20 X 3 SS |
| 63 | 2 | 555025 | CLAMP-WHEEL GUARD |
| 64 | 1 | 555026 | BOTTOM SLIDE - HANDLEBAR ADJ |
| 65 | 1 | 555031 | SPACER - HANDLEBAR ADJ |
| 66 | 2 | 555037 | SPACER-032039114 |
| 67 | 1 | 555039 | PIN-MF-5/16 SQ X 2 1/8 |
| 68 | 2 | 555048 | PLATE - FRICTION W/HOLE |
| 69 | 1 | 555049 | TUBE - SEAT |
| 70 | 1 | 555051 | COVER - BELT-MAIN |
| 71 | 1 | 555052 | COVER - BELT-INNER |
| 72 | 1 | 555053 | GEAR - POT |
| 72 | 1 | 555054 | SHIFTER - R |
| 74 | 1 | 555055 | SHIFTER - L |
| 75 | 2 | 555058 | BUSHING - SHORT |
| 76 | 1 | 555073 | CAP - WHEEL GUARD-BOT |
| 77 | 2 | 555074 | HANDLE - L-BLACK |
| 78 | 2 | 555075 | HANDLE - STUD-BLACK |
| 79 | 2 | 555076 | CAP-M6 SHCS-BLACK |
| 80 | 1 | 555077 | COVER - LOWER-MAIN FRAME-SHORT |
| 81 | 1 | 555078 | GUARD - SWEAT-HANDLEBAR-SHORT |
| 82 | 1 | 555080 | COVER - DISPLAY MT |
| 83 | 1 | 555081 | FACE - DISPLAY-COMPUTER-BT |
| 84 | 1 | 555085 | MEDIA HOLDER - M3i |
| 85 | 1 | 555095 | NECK - DISPLAY-COMPUTER-BT |
| 86 | 2 | 555101 | STRETCH PAD - SINGLE |
| 87 | 1 | 555371 | DECAL - CAUTION-PEDAL TORQUE |
| 88 | 1 | 555385 | DECAL - DOME-KEISER M31 |
| 89 | 1 | 555386 | DECAL - HANDLEBAR-POSITION-BLK |
| 90 | 1 | 555387 | DECAL - WARNING - USAGE |
| 91 | 2 | 555402 | BEARING-6004ZZ-SHIELDED |
| 92 | 1 | 555403 | MAGNET-CYL-3.20 X 9.53 MM GR N45 |
| 93 | 2 | 555404 | MAGNET-25 X 9.5 MM |
| 94 | 1 | 555405 | SPRING-TORSION |
| 95 | 1 | 555406 | BELT - POLY V |
| 96 | 1 | 555410 | PAD-BRAKE-FRICTION |
| 97 | 1 | 555411 | SHIFT CABLE |
| 98 | 1 | 555413 | CORD COMP TO PICKUP |
| 99 | 2 | 555418 | BEARING-6203ZZ-SHIELDED |
| 100 | 2 | 555419 | SCREW - HSPPSS-M10x1.5 X 16 BLK |
| 101 | 1 | 555420 | SWEAT STRIP - 5/16 X 3/8 |
| 102 | 1 | 555421 | CRANK ARM - L |
| 103 | 1 | 555424 | CRANK ARM - R |
| 104 | 1 | 555427 | AXLE - BOTTOM BRACKET-HOLLOW |
| 105 | 2 | 555428 | RETAINING RING - INT-42MM |
| 106 | 2 | 555446 | SCREW - HWHS-M8X1 X 60 CS |
| 107 | 2 | 555448 | WHEEL - 3 IN-W/BUSHING |
| 108 | 1 | 555457 | SADDLE - M3X |
| 109 | 2 | 555459 | SCREW - SHCS M6x1 X 16 SS-PATCHED |
| 110 | 2 | 555460 | PEDAL SET - COMBO-KEISER |
| 111 | 1 | 555473 | GRIP - HANDLEBAR-NEUTRAL-ADJ |
| 112 | 1 | 555518 | MANUAL - USER-M3i |
| 113 | 2 | 565407 | COVER-SQ PIN HOLE |
| 114 | 2 | 605051 | PLUG GRIP |
| 115 | 2 | 966502 | BATTERY - AA CELL |
| 116 | 1 | 990837 | STABILIZER - FRAME |
| 117 | 3 | 995076 | SPACER - BUMPER |
| 118 | 1 | 995322 | DECAL - BASE STABILIZER ADJ-M SERIES |
| 119 | 1 | 995324 | DECAL - MADE IN THE USA |
| 120 | 1 | 995375 | DECAL - PART 15-FCC |
| 121 | 1 | 995384 | DECAL - SN-M3i & M5i-CE-UKCA-MDR |
General Notes
- Dimensions are in inches, with millimeters in brackets [ ].
- Break sharp edges: .005-.015 [.10-.40].
- Machined surface finish: 63 microinches [1.6 micrometers].
- Do not scale drawing.
