Razer BlackShark V3 for Xbox

Table of Contents

1. Contents
2. Requirements
3. Brief Introduction
4. Getting Started
5. Using Razer BlackShark V3 for Xbox
6. Configuring Your Razer Headset
7. Safety and Maintenance
8. Legal Terms

1. Contents

Razer BlackShark V3 for Xbox (Xbox Compatible)

Product Components:

• A. Adjustable padded headband
• B. Hybrid fabric and faux leather memory foam ear cushions
• C. Volume control
• D. Microphone mute toggle switch
• E. Power button
• F. Status indicator LED
• G. USB Type-C port
• H. Microphone port
• I. SmartSwitch™:
  • Equalizer (EQ) presets*
  • 2.4GHz mode
  • Bluetooth® mode
  • Synchronous audio mode
• J. Configurable Game/Chat balance control*

Second-generation Razer™ HyperSpeed Wireless Receiver:

• K. Headset mode switch
• L. USB Type-C port
• M. Receiver LED indicator

Detachable Razer™ HyperClear Cardioid Mic:

Type-A to Type-C Cable:

Important Product Information Guide

*Can be customized for other functions via Razer Audio Setup for Xbox, Razer Xbox Game Bar, Razer Synapse, or Razer Audio app.

2. Requirements

Product Requirements:

• Devices with Bluetooth audio capability, a USB Type-A port, or a 3.5mm audio jack.

RAZER SYNAPSE Requirements:

• Windows 10 64-bit (or higher).
• Internet connection for application installation.

RAZER AUDIO Application Requirements:

• Xbox Series™ X|S.
• iOS 12 / Android 8.1 Oreo (or higher).
• Internet connection for application installation.

Brief Introduction:

Your product's serial number is located here. [Diagram showing serial number location on the headset]

Register your product and get exclusive benefits: razerid.razer.com/cn-zh/warranty

3. Getting Started

Charging the Headset

1. [Diagram showing USB Type-C cable connecting to headset and USB Type-A to a power source]
2. [Diagram showing headset connected via USB Type-C, with a battery status indicator showing "<5%" and a table detailing charging status and LED indicators]

Charging Status | Status Indicator LED

Powering the Headset On/Off:

[Diagram showing the power button and a finger pressing and holding it for 2 seconds]

Press and hold the power button for 2 seconds to turn ON/OFF.

• ON: Solid Green (2 seconds)
• OFF: Solid Red (1 second)

Connecting to Your Device:

Wired Mode:

For PC: [Diagram showing USB Type-C to USB Type-A connection]

For optimal performance, connect the Razer BlackShark V3 for Xbox directly to your PC's USB port using the included cable. A full charge for a depleted battery takes approximately 4 hours. If the receiver is in use, you can use the USB-C cable that comes with your Xbox controller to charge the headset.

4. 2.4GHz Mode

For Xbox:

1. [Diagram showing headset power button being pressed for 2 seconds to turn on, indicated by solid green light]
2. [Diagram showing the Razer HyperSpeed Wireless Receiver being plugged into an Xbox USB port]
3. [Diagram showing the Xbox console and controller, with the receiver connected to the Xbox]

Connection Status:

• Connecting: Flashing Green
• Connected: Solid Green

Headset Battery Status:

• Red: Low Battery
• Yellow: Medium Battery
• Green: High Battery

*You can customize the LED indicator via Razer Audio Setup for Xbox to display headset connection status, battery status (default), or low battery warnings.

For PC:

1. [Diagram showing headset power button being pressed for 2 seconds to turn on, indicated by solid green light]
2. [Diagram showing the Razer HyperSpeed Wireless Receiver being plugged into a PC USB port]
3. [Diagram showing PC and laptop, with the receiver connected to a USB Type-A port]

Connection Status:

• Connecting: Flashing Green
• Connected: Solid Green

Headset Battery Status:

• Red: Low Battery
• Yellow: Medium Battery
• Green: High Battery

*You can customize the LED indicator via Razer Synapse to display headset connection status, battery status (default), or low battery warnings.

5. Bluetooth® Mode

1. [Diagram showing headset power button being pressed for 2 seconds to turn on, indicated by solid green light]
2. [Diagram showing the SmartSwitch button being pressed twice, indicated by flashing blue light]

Pairing: Flashing Blue

1. [Diagram showing various devices: PC, laptop, smartphone, Nintendo Switch, Xbox controller]
2. Search for the headset on your Bluetooth device: [Diagram showing Bluetooth settings, then device selection] -> BlackShark V3 Xbox BT
3. [Diagram showing headset with "Paired" status indicated by solid blue light]

Paired: Solid Blue

*If pairing times out, the headset will turn off. Follow the next step to re-initiate pairing.

6. Re-activating Bluetooth Pairing Mode

1. [Diagram showing headset power button being pressed for 2 seconds to turn on, indicated by solid green light]
2. [Diagram showing the SmartSwitch button being pressed and held for 5 seconds, indicated by flashing blue light]

Pairing: Flashing Blue

1. [Diagram showing various devices: PC, laptop, smartphone, Nintendo Switch, Xbox controller]
2. Search for the headset on your Bluetooth device: [Diagram showing Bluetooth settings, then device selection] -> BlackShark V3 Xbox BT
3. [Diagram showing headset with "Paired" status indicated by solid blue light]

Paired: Solid Blue

*If pairing times out, the headset will turn off. Follow the next step to re-initiate pairing.

7. Other Settings

Paired with both wireless modes: [Diagram showing headset with "Paired" status indicated by solid white light]

Paired: Solid White

Switching Wireless Modes:

[Diagram showing the SmartSwitch button being pressed twice to cycle through modes]

Press twice to cycle.

Modes: 2.4GHz Mode ➔ BT Mode ➔ Synchronous Audio Mode

For XBOX:

Customize your headset and unlock advanced features for an unparalleled audio experience. Download and install the Razer Audio Setup for Xbox app from the Microsoft Store on your Xbox console. [Icons for Microsoft Store, Xbox, Razer Audio Setup for Xbox]

8. For PC

Ensure the Razer BlackShark V3 for Xbox is set as the default input and output device on your computer.

Wired Mode:

[Diagram showing PC sound settings, selecting "BlackShark V3 Xbox USB - Game" for Output and "BlackShark V3 Xbox USB - Chat" for Input]

2.4GHz Mode:

[Diagram showing PC sound settings, selecting "BlackShark V3 Xbox - Game" for Output and "BlackShark V3 Xbox - Chat" for Input]

Personalize Your PC Experience:

Use the Razer Synapse app to customize your headset's equalizer, enable audio enhancements, and fine-tune other advanced features. Install Razer Synapse when prompted, or download it from cn.razer.com/synapse.

Enable THX® Spatial Audio*:

Experience 360° sound localization with THX Spatial Audio for a more natural and immersive experience. [THX Spatial Audio Logo]

*Only applicable for Windows 10 64-bit and higher systems.

9. For Mobile Devices

Download the Razer Audio app to customize your headset's equalizer settings, auto-off function, game modes, and more, anytime, anywhere.

[QR Code for App Store, "Download on the App Store" button, "GET IT ON Google Play" button, "Android Download" link, RZR.TO/AUDAPP (China only) link]

1. Download the mobile application on your mobile device.
2. Open the application and follow the on-screen instructions.

*When using the Razer Audio app, ensure your headset is connected to your mobile device via Bluetooth.

10. Using Razer BlackShark V3 for Xbox

RAZER HYPERCLEAR Cardioid Mic:

Attaching the Microphone:

[Diagram showing the microphone being plugged into the headset's microphone port]

[Diagram showing the microphone arm positioned correctly near the mouth]

Correct Microphone Placement:

[Diagram showing incorrect placement (too far, near vent) and correct placement (near mouth, 2.54 cm away)]

• Microphone Diaphragm | Vent Hole
• In front of the mouth | Away from the mouth

Muting/Unmuting the Microphone:

[Diagram showing the mute toggle switch on the headset]

Toggle switch: Mute / Unmute

• Mute: [Icon showing microphone with a slash]
• Unmute: [Icon showing microphone without a slash]

11. Adjusting Volume

[Diagram showing the volume wheel on the headset]

Increase Volume

Decrease Volume

Changing EQ Presets:

[Diagram showing the SmartSwitch button and EQ preset options]

Press to cycle through presets: Default, Game, Movie, Music, Esports 1.

*You can customize the EQ preset list via Razer Audio Setup for Xbox, Razer Xbox Game Bar, Razer Synapse, or the Razer Audio app.

12. Adjusting Game/Chat Balance

[Diagram showing a slider or dial]

Increase game volume and decrease chat volume.

Decrease game volume and increase chat volume.

Max Game Volume | Balance | Max Chat Volume

*Can be customized for other functions via Razer Audio Setup for Xbox, Razer Xbox Game Bar, Razer Synapse, or the Razer Audio app.

Bluetooth Call Function Reference:

13. Adjusting Comfort

[Diagram showing how to gently stretch the headband]

1. Gently stretch the headband before wearing the headset, but do not overstretch to avoid permanent damage.

Visit support.razer.com/cn for more information about this gaming headset.

14. Configuring Your Razer Headset

This section details the configuration options available through the Razer Synapse software.

Disclaimer:

This guide covers the new Razer Synapse app, which may only partially cover your device's features. Synapse requires an internet connection for installation, updates, and cloud features. Razer ID registration is recommended but not mandatory. Feature availability may vary by version, device, and add-ons.

SYNAPSE Overview:

• Minimize: Minimizes the app to the system tray.
• Maximize: Expands the window to fill the screen.
• Close: Closes all tabs and terminates the application.
• Previous Tab: Navigates to the previously viewed tab.
• Next Tab: Navigates to the next tab.
• Refresh Tab: Reloads the current page.
• Download Updates: Appears if updates are available.

Control Panel:

The main hub for Razer devices, modules, and online services.

• Devices: View and manage connected peripherals.
• Modules: Install and manage software add-ons.
• Online Services: Access Razer's online features.
• Gamer Room: Manage Razer Chroma-enabled devices for ambient lighting.
• Synapse Overlays: Customize lighting effects and sync with games.
• GAMER ROOM Application Control: Control devices via the Gamer Room app.

Devices and Modules:

Lists installed and available modules.

General Hotkeys:

Assign custom key combinations to functions across all device profiles.

Profiles:

Save and manage device settings. Profiles can be imported, exported, renamed, etc.

• Profiles Dropdown: Select from saved profiles.
• Other (...) Button: Manage profiles (add, import, rename, copy, export, delete).
• Audio Equalizer:
  • Select presets (Game, Movie, Music, Esports) or customize.
  • Game Profiles: Automatically load specific audio settings when a game is active.
  • Game/Program association: Link applications to specific profiles.
  • Volume: Adjust master volume or per-application volume using Windows Volume Mixer.
  • Game/Chat Balance: Mix audio between game and chat.
  • Audio Properties: Access Windows sound settings.
• Enhancements:
  • Sound Normalization: Adjusts volume levels for consistency.
  • Bass Boost: Enhances low-frequency output.
  • Voice Clarity: Improves the quality of voice communications.
• Microphone:
  • Adjust microphone volume or mute/unmute.
  • Mic Test: Test microphone input audio levels.
  • Mic Enhancements: Improve mic quality (Sound Normalization, Bright Voice, Noise Reduction, Gate).
  • Mic Equalizer: Select or customize microphone EQ presets.
  • Mic Monitoring: Hear your own voice through the headset.
• Power: Manage power consumption for wireless devices.
  • LED Indicator: Customize what the HyperSpeed receiver's LED displays (Connection Status, Battery Status, Battery Warning).
  • Wireless Power Saving: Set automatic device shutdown after a period of inactivity.
• Display: Switch between Stereo and THX Spatial Audio.
• Games: Link applications to peripherals.
• Devices: View connected devices and their associated applications.
• Settings:
  • Synapse: Configure Synapse application settings (Auto-start, Recommendations, Device Lighting, Notifications, Tutorials, Language, About).
  • About: Displays software version, copyright, and links to Razer's terms and community.
• Feedback: Submit feedback, suggestions, or bug reports.

15. Safety and Maintenance

Safety Guidelines:

For maximum safety, follow these guidelines:

• If the device malfunctions, unplug it and contact Razer support or visit support.razer.com/cn.
• Do not disassemble the device (this voids the warranty). Do not use under abnormal electrical load conditions.
• Keep the device away from liquids and moisture. Use only in environments between 0°C and 40°C. If temperatures exceed this range, unplug or turn off the device to stabilize its temperature.
• Gently stretch the headband before wearing to minimize pressure on the headband. Do not overstretch.
• The headset provides sound isolation, which can reduce awareness of your surroundings. Remove the headset if your activity requires awareness of your environment.
• Listening at high volumes for extended periods can damage your hearing. Legal maximum sound levels may be around 86 decibels for 8 hours daily. Lower the volume to a comfortable level. Protect your hearing.

Maintenance and Care:

The Razer BlackShark V3 for Xbox requires minimal maintenance. Clean monthly with a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or corrosive cleaners.

16. Legal Terms

Copyright and Intellectual Property Notice:

©2025 Razer Inc. All rights reserved. Razer, the triple-headed snake logo, Razer logo, "For Gamers. By Gamers.", and Razer Chroma logo are trademarks or registered trademarks of Razer Inc. or its affiliates. Other trademarks are property of their respective owners.

Microsoft, Xbox, Xbox "sphere" design, Xbox Series X|S, Xbox One, and Windows 11 are trademarks of the Microsoft group of companies.

Android, Google, Google logo, Google Play, and Google Play logo are trademarks of Google LLC.

Apple, Apple logo, and iPhone are trademarks of Apple Inc.

Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc.

Windows and Windows logo are trademarks of Microsoft.

Razer Inc. may own copyrights, trademarks, trade secrets, patents, or patent applications related to the product described in this guide. Providing this guide does not grant any rights. The product may differ from images. Razer is not liable for differences or errors. Information is subject to change without notice.

Limited Product Warranty:

For warranty terms, visit cn.razer.com/warranty.

Limitation of Liability:

Razer is not liable for any loss of profit, information, or data, or for special, incidental, indirect, punitive, or consequential damages arising from the distribution, sale, resale, use, or inability to use the product. Razer's liability shall not exceed the retail price of the product.

General Terms:

This agreement is governed by the laws of the product's place of purchase. If any term is found invalid or unenforceable, it will be excluded, but the remaining terms remain valid. Razer reserves the right to amend terms without notice.