SONGESAND Chest of Drawers

Safety Warnings ⚠️

WARNING: Serious or fatal crushing injuries can occur from furniture tip-over.

ALWAYS secure this furniture to the wall using tip-over restraints.

To further reduce the risk of serious injury and death from tip-overs:

• Place heaviest items in the lower drawer.
• Do not set TVs or other heavy objects on top of this product.
• Never let children climb or hang on drawers, doors, or shelves.

Tools Required ?️

The following tools are recommended for assembly:

• Phillips head screwdriver
• Flathead screwdriver
• Pencil
• Drill
• Measuring tape

Hardware Sizes:

• Screws: Ø 5/16" (8 mm)
• Drill bits: Ø 1/8" (3 mm)

Parts List

This section details all the components and hardware required for assembly. Quantities are indicated where applicable.

Assembly Steps ⚙️

Follow these steps carefully to assemble your SONGESAND chest of drawers.

Step 1: Preparation

Gather all parts and hardware as listed above. Familiarize yourself with each component.

Step 2: Base Assembly

Assemble the base structure of the unit. Attach the side panels to the bottom panel using screws and dowels.

Step 3: Drawer Slides Installation (Main Unit)

Attach the drawer slides to the inner sides of the main unit frame.

Step 4: Dowel Insertion

Insert dowels into designated holes on various panels.

Step 5: Attaching Decorative Front Piece

Attach a long decorative piece to the top front of the unit.

Step 6: Attaching Vertical Side Panels

Attach the main vertical side panels to the assembled base.

Step 7: Attaching Another Decorative Piece

Attach another long decorative piece, likely to the back or side.

Step 8: Attaching More Vertical Panels

Continue attaching vertical support panels.

Step 9: Attaching Further Vertical Panels

Add more vertical structural elements.

Step 10: Inserting Cam Locks

Insert cam locks into their respective holes.

Step 11: Attaching More Vertical Panels

Continue building the vertical structure.

Step 12: Inserting More Cam Locks

Secure connections using cam locks.

Step 13: Attaching Vertical Panels

Continue the assembly of the vertical frame.

Step 14: Attaching the Top Panel

Place and secure the top panel of the unit.

Step 15: Securing the Top Panel

Fasten the top panel using cam locks.

Step 16: Warning - Do Not Force

A warning symbol indicates not to force parts together.

Step 17: Assembling Drawer Boxes

Begin assembling the individual drawer boxes.

Step 18: Attaching Drawer Back Panel

Attach the back panel to a drawer box.

Step 19: Attaching Drawer Slides (Drawer)

Attach the corresponding drawer slides to the assembled drawer boxes.

Step 20: Attaching Drawer Slides

Continue attaching drawer slides to drawer components.

Step 21: Attaching Drawer Slides

Further attachment of drawer slides.

Step 22: Attaching Drawer Slides

Final attachment of drawer slides to drawer components.

Step 23: Inserting Dowels into Main Unit

Insert dowels into the main unit frame for drawer support.

Step 24: Attaching Drawer Front Panel

Attach the front panel to the assembled drawer structure.

Step 25: Securing Drawer Front Panel

Fasten the drawer front panel using cam locks.

Step 26: Attaching Wall Mounting Brackets

Attach the provided wall mounting brackets to the unit.

Step 27: Assembling Drawer Boxes

Continue assembling the remaining drawer boxes.

Step 28: Inserting Drawer Boxes

Slide the assembled drawer boxes into the main unit.

Step 29: Inserting Cam Locks for Drawer Support

Secure drawer supports using cam locks.

Step 30: Inserting Drawer Bottom Panels

Slide the drawer bottom panels into place.

Step 31: Attaching Drawer Handles

Attach the drawer handles to the drawer fronts.

Step 32: Attaching Drawer Handles

Continue attaching drawer handles.

Step 33: Flipping the Unit Upright

Carefully turn the assembled unit upright.

Step 34: Attaching Drawer Fronts

Attach the drawer fronts to the main unit structure.

Step 35: Attaching Drawer Runners

Attach the final drawer runners to the main unit frame.

Step 36: Final Product

The SONGESAND chest of drawers is now assembled.

Wall Mounting Instructions ?

It is crucial to secure the furniture to the wall to prevent tip-over accidents. Use the provided hardware and follow these instructions based on your wall type.

Wall Types and Hardware

The supplied screws and plugs can be used with most solid (A) and hollow (B) walls. For solid wood (C), use screws without plugs.

Type A: Solid Wall

Diagram Description: Shows a screw being driven directly into a solid wall, with a plug not used.

Hardware: Screw (Ø 8 mm / 5/16"), Wall plug (not used for solid wood).

Type B: Hollow Wall

Diagram Description: Shows a screw being driven through a wall plug into a hollow wall.

Hardware: Screw (Ø 8 mm / 5/16"), Wall plug (e.g., Part 121714).

Type C: Solid Wood

Diagram Description: Shows a screw being driven directly into solid wood.

Hardware: Screw (Ø 3 mm / 1/8").

Mounting Procedure

1. Mark and Drill: Determine the desired position for the furniture and mark the wall for the mounting bracket holes. Drill holes according to the wall type and insert wall plugs if necessary.
2. Attach Bracket: Secure the wall mounting bracket (Part 106989) to the wall using appropriate screws and plugs.
3. Attach Furniture: Align the furniture with the wall bracket and secure it using the provided screws (e.g., Part 109049, Part 100823). Ensure the connection is firm.

Product Care and Information

For specific care instructions or further information, please refer to the IKEA website or contact IKEA customer service.

Model: SONGESAND

Manufacturer: IKEA of Sweden