MOMAX SG3S Smart Ring - User Manual

Introduction

This manual provides instructions for the MOMAX SG3S Smart Ring, covering setup, features, usage, and safety precautions.

Setup Instructions

1. Download the MOMAX Sense App: Search for 'MOMAX Sense' on iOS or Android and download the app.
2. Register: Create an account and log in using your email address.
3. Prepare the Ring for Pairing: For initial setup, ensure the ring is connected directly to the charging cable and charging. It will automatically enter pairing mode.
4. Open the App: Launch the MOMAX Sense app, click the 'Add' button on the Status page to enter the ring binding interface, and search for the device.
5. Pair the Ring: Select the ring when it appears in the pairing list to start binding. If it doesn't appear, ensure the charging cable is connected and the ring is charging.
6. Automatic Connection: The app will automatically connect and bind the ring. A green LED light will flash on the ring for 1-2 seconds during binding.
7. Unbinding the Ring: To unbind, click 'Unbind Ring' in the app's settings. For iPhones, manually remove or ignore the ring from your phone's Bluetooth settings.

Wearing the Ring

For optimal performance of the Smart Touch Control feature, wear the ring correctly:

• Placement: Wear the ring on your finger (index finger recommended).
• Sensor Position: Ensure the sensor area is on the inside of your finger.
• Comfort Tip: Align the upper end of the touch marker line with the middle line on the side of your finger for a more comfortable touch experience.

Features and Functions

• Advanced Health & Fitness Tracking: Monitors heart rate, heart rate variability, blood oxygen level (SpO2), and skin temperature. Tracks steps, calories burned, and exercise records.
• Emotion Monitoring and Assessment: Utilizes emotion recognition technology.
• Sleep Analysis and Health Insights: Provides detailed sleep data (total sleep, deep sleep, light sleep, REM sleep, awake periods, breathing quality) and recovery status.
• Women's Menstrual Cycle Tracking: Visualizes menstrual cycle data to help predict periods and aid in pregnancy preparation.
• Smart Touch Control: Embedded touch sensor to control apps like short videos, music, selfies, reading, and SOS settings.
• Vibrating Haptic Motor: Silently notifies of calls, reminders, and alerts.
• Durable & Lightweight: Made of PC Compound + Stainless Steel, weighing approximately 4g.
• Long Battery Life: Up to 6 days on a single charge.
• Offline Data Storage: 7 days.
• Comfortable Design: Skin-friendly contact.
• 5 ATM Water Resistant: Water resistant up to 50 meters.

Smart Touch Application

Enable the 'Smart Touch application' in the 'Me' page of the app. Users can select applications (short video, camera, music) and control them by sliding or pressing the touch sensing area.

Intelligent Sleep Mode:

The smart touch control automatically enters sleep mode after a period of inactivity. It must be awakened to respond to touch commands. If not awakened within an hour, the function turns off automatically.

Wake-up Methods:

• APP touch settings: Reactivate the smart touch application feature.
• Ring wake-up gesture: Flip your wrist and quickly slide twice along the ring's touch area.

SOS Features

Enable 'SOS' in the 'Me' page to trigger emergency SOS.

SOS Trigger Actions:

• Tap the ring-wearing hand up and down more than 9 times.
• Long swipe the touch sensing area, then double-click more than 5 times.

Note: The SOS function relies on your mobile phone's emergency SOS capabilities. Ensure your phone supports and has this function activated.

Charging the Ring

1. Connect the ring to the magnetic charging cable.
2. Indicator Lights:
   • Charging (before pairing): Red light flashes.
   • Charging (after pairing): Red light stays on.
   • Fully Charged (before pairing): Green light flashes, then turns off.
   • Fully Charged (after pairing): Green light stays on, then turns off.

Specifications

• Input Voltage: 5V 35mA
• Battery Capacity: 3.7V 17mAh Li-Po Battery
• Operation Time: Up to 6 days per charge
• Charging Time: ~1.5 Hours
• Sensors: Photoplethysmography (PPG) Sensor / Temperature Sensor / 3D Accelerometer / Touch Sensor
• Connectivity: Wireless V5.4
• Waterproof: 5 ATM
• Charging Port: Magnetic Charging Port
• Dimensions: Width: ~7.5mm, Thickness: ~2.5mm
• Weight: ~4 grams (depending on ring size)
• Materials: (Ring) PC Compound / Stainless Steel / Epoxy Coating

Package Contents

• 1 x 1-SENSE SOUL Smart Ring
• 1 x USB-A to Magnetic Port Charging Cable, 0.3M
• 2 x Silicone Ring Protector
• 1 x Instruction Manual and Warranty Card

Safety and Precautions

• The device has a built-in, non-removable battery. Do not disassemble or modify it.
• Avoid exposing the device to high temperatures or heat sources.
• Do not throw the device into fire.
• Keep the device and accessories away from children and pets.
• Do not place the device near heat sources or open flames.
• If you have allergies to materials like plastic or stainless steel, discontinue use and consult a doctor if irritation occurs.
• All sensors are for reference only and not for medical purposes.
• Dispose of the device and accessories according to local laws and recycling efforts.