Anko DIY Sparkle Gem Art Bear - Instruction Sheet
Product Code: 43-571-529
Brand: Anko
Product Overview
This kit allows you to create a sparkling gem-covered bear.
Dimensions: 17cm (Height) x 11cm (Width) x 7cm (Depth)
Includes:
- Individual gems
- Colored gems
- Tool set
- Instruction sheet
Instructions
- Pour the gems onto the plastic tray.
- Remove one side of the plastic film from the pink wax block and press the nib of the tool into the wax.
- Before opening the glue, ensure you are in a well-ventilated area. Apply a small amount of glue where you wish to start applying gems. Allow the glue to become tacky for 20-30 seconds before applying the gems.
- Pick up a gem using the tool, ensuring the end is placed over the faceted side of the gem. Press the gem firmly onto the surface of the vinyl bear.
- Continue adding gems until the entire surface of the bear is covered.
- Once finished, allow the glue to dry overnight before use.
Visual Guide
The visual guide shows a completed Anko DIY Sparkle Gem Bear, which is a pink bear figure covered in iridescent gems, giving it a sparkling appearance. The kit includes a bear figure, a tray of pink gems, a tube of adhesive, and a tool for picking up and placing the gems.
