Anko DIY Sparkle Gem Art Bear
This document provides instructions for the Anko DIY Sparkle Gem Art Bear craft kit.
Product Description
The Anko DIY Sparkle Gem Art Bear is a craft kit that allows users to create a sparkling bear figure by applying individual gems.
Dimensions: 17cm (Height) x 11cm (Width) x 7cm (Depth).
Includes
- Glue
- Individual coloured gems
- Tool set
- Instruction sheet
Instructions
- Pour the gems onto the plastic tray.
- Remove one side of the plastic film from the pink wax block and press the nib of the tool into the wax.
- Before opening the glue, ensure you are working in a well-ventilated area. Add a small amount of glue where you would like to begin applying gems. Let the glue become tacky for 20-30 seconds before applying the gems.
- Pick up a gem using the tool, making sure to place the end over the faceted side of the gem. Press the gem firmly onto the surface of the vinyl bear.
- Continue adding gems until you have covered the whole surface.
- Once finished, allow the glue to dry overnight before using.
Visual Description
The kit includes a white, bear-shaped vinyl figure, a packet of small, multi-faceted pink gems, a tube of adhesive glue (B-6000), a plastic tray for sorting gems, and a tool with a wax tip for picking up gems.
