Product Models
The VEVOR Shade Cloths are available in the following models: SSZGB-02, SSZGB-03, SSZGB-04, SSZGB-05, SSZGB-06, SSZGB-07.
Product Visuals
Two images display brown and black shade cloths, respectively, featuring a woven mesh pattern and reinforced edges with visible grommets.
Three images show black shade cloths with a woven mesh pattern, reinforced edges, and grommets.
An image displays a beige/brown shade cloth with a distinct layered or quilted appearance, a woven mesh pattern, reinforced edges, and grommets.
This document contains original instructions. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret its user manuals. The appearance of the product may vary from the images shown.
SAFETY INSTRUCTIONS
WARNING:
Read this material before using this product. Failure to do so may result in serious injury.
PRECAUTIONS:
1. Installation safety:
- Avoid installation in bad weather such as strong wind, rain, and snow.
- Use special fixing tools (e.g., nylon ties, U-shaped nails) to prevent the netting from falling off and causing accidents.
2. Fire warning:
- HDPE material is flammable; keep away from fire and high temperature heat sources (such as welding sparks, open flame).
- Prohibit fireworks near the netting.
3. Load restrictions:
- Do not hang heavy objects or climb, so as not to tear the netting.
- When the snow is too thick, it needs to be cleaned in time to prevent overloading and breaking.
4. Children's safety:
- The edge of the netting needs to be fixed firmly to avoid children pulling and entangling, resulting in danger.
SAVE THIS MANUAL
ACCESSORY LIST
- Bungee Balls *5pcs
- Zip-ties *30pcs
- Nylon Rope *4pcs
- Instruction Manual *1pcs
PRODUCT OVERVIEW
HDPE shade netting is woven with high-density polyethylene (HDPE) material, featuring strong weather resistance, UV resistance, high shading rate, lightweight, and durability. It is widely used in:
- Agricultural cultivation: greenhouse shading, greenhouse cooling.
- Construction site: dustproof enclosure, temporary sunshade.
- Outdoor sunshade: courtyard, balcony sun protection.
- Horticultural protection: plant frost prevention, wind and sand prevention.
PRODUCT PARAMETER
| Model | Colour | Shape | Main Material | Shading Ratio | Product Size |
|---|---|---|---|---|---|
| SSZGB-02 | Brown & Black | Rectangle | High Density Polyethylene (HDPE) | 90% | 8*12ft |
| SSZGB-03 | Black | Rectangle | |||
| SSZGB-04 | Black | Rectangle | High Density Polyethylene (HDPE) | 90% | 10*10ft |
| SSZGB-05 | Brown & Black | Rectangle | High Density Polyethylene (HDPE) | 90% | |
| SSZGB-06 | Black | Rectangle | 10*12ft | ||
| SSZGB-07 | Beige Brown & Black | Rectangle | High Density Polyethylene (HDPE) | 90% | 12*20ft |
HOW TO USE
Step 1: Select Size
According to the actual use of the scene, select the corresponding size of the product model and quantity. Measure the size according to the actual scene requirements. When selecting the mesh size, it is recommended to leave a margin of 5-10cm for ease of installation.
Step 2: Fixing the Mesh
- Elevation fixing: Use nylon ties to tie the netting to the bracket or frame.
- Top hanging: Telescopic adjustment by nylon rope or elastic ball.
Step 3: Check Firmness
Pull lightly on the mesh after installation to make sure there is no loosening or tilting.
MAINTENANCE METHOD
1. Daily cleaning:
- Remove surface dust and debris with a soft-bristle brush or low-pressure water gun.
- Stubborn stains can be wiped with neutral detergent; prohibit the use of strong acid/alkaline cleaners.
2. Long-term storage:
- Fold neatly after disassembly and store in a cool and dry place.
- Avoid co-storage with sharp objects to prevent scratches.
3. Periodic Inspection:
- Check the fixed parts quarterly for corrosion and looseness and replace them in time.
- Discovered local damage can be repaired with patch stitching of the same material or hot melt adhesive.
COMMON PROBLEMS AND COUNTERMEASURES
| Problem Phenomena | Possible Causes | Solution Countermeasures |
|---|---|---|
| Fading and brittleness of mesh | Long-term UV aging | Replace with new mesh, choose UV-enhanced models |
| Edge tearing | Poor fixing or strong wind | Reinforce the edges, use edge banding |
| Sagging or loose mesh | No allowance for expansion or contraction during installation | Re-tension and secure, add more support points |
| Difficult to remove surface stains | Contaminated with oil or chemicals | Use special cleaner for localized treatment |
| Odor | New mesh factory residual odor | Ventilation and drying 2-3 days after the dissipation |
Manufacturer and Importer Information
Manufacturer: Shanghaimuxinmuyeyouxiangongsi, Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
Representatives:
- UK REP: YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
- EC REP: E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
Contact Us â Official VEVOR Support
