QUICK START GUIDE

Step 1: Connect Cuff Tube

[Diagram: Hand connecting cuff tube to blood pressure monitor]

Make sure the cuff tube is securely connected to the monitor.

Step 2: Position Cuff

[Diagram: Cuff wrapped around upper arm, positioned about 1/2 inch above the elbow]

Slide the cuff onto your arm until the bottom edge is about 1/2 inch above your elbow. Tighten the cuff until it is snug against your arm, but not too tight.

Step 3: Prepare for Measurement

[Diagram: Person sitting, resting arm, and pressing the start button on the blood pressure monitor]

Sit and rest for 5 minutes prior to measurement. Relax your arm and push the start button.

Questions?

Call 1-800-568-4147