Canopia Sophia Door Awning: Assembly Guide

About the Sophia Door Awning

The Sophia Door Awning by Canopia is designed to provide protection and enhance the entrance of your home. This guide covers everything from initial site selection to the final steps of assembly.

Important Information Before You Begin

Please read through all instructions carefully before starting. Ensure you have all the necessary tools and parts. Safety is paramount; always use appropriate safety gear and follow all safety advice provided.

For assistance or missing parts, visit canopia.shop/part_request or for assembly help, visit canopia.shop/support.

Tools and Equipment

Gather the following tools before you start:

• 2 People Recommended
• Work Gloves
• Pencil
• Tape Measure
• Spirit Level
• Scissors
• Silicone
• Electric Drill with appropriate drill bits
• Allen Key / Hex Key
• Ladder
• Cordless Drill with Philips Head

Assembly Steps

Follow the step-by-step instructions provided within this manual. Pay close attention to diagrams and any special icons that may indicate specific procedures or warnings.

Remember to work on a soft surface to avoid scratching the parts and ensure all panels with the "THIS SIDE OUT" marking are correctly oriented for UV protection.

Care and Maintenance

To keep your Sophia Door Awning in excellent condition, clean it with a mild detergent solution and rinse with cold, clean water. Avoid using acetone or abrasive cleaners.