Creative Outlier Pro

Overview

Charging Case Battery Indicator

Charging Indicator

• Charging: Glowing Red
• Fully Charged: Solid Green

Battery Level

• Low: Solid Red
• Medium: Solid Yellow
• High: Solid Green

Earbud Charging Indicators

• Left Earbud Charging Indicator
• Right Earbud Charging Indicator

Earbuds Charging Indicator

• Charging: Glowing Red
• Fully Charged: Solid Green

Other Indicators

• USB-C Charging Port
• Earbuds LED Indicator:
• Bluetooth Pairing: Blinking Red and Blue
• Charging: Glowing Red (In Charging Case)
• Fully Charged: LED Off

Controls

Playback Mode

• Tap twice: Play/Pause, Answer/End Call
• Tap three times: Next Track
• Tap and hold for 3s: Siri / Google Assistant
• Tap and hold for 3s (second tap): Ambient Mode / Active Noise Cancellation / Off

Note: Certain playback functions can be customized through the Creative app when connected via Bluetooth.

Call Mode

• Tap twice: Answer/End Call
• Tap and hold for 3s: Reject Call / End Call

Note: Volume adjustments on the earbuds are unavailable during incoming / outgoing calls.

Entering Bluetooth Pairing Mode Manually

Tap and hold either earbud for 3 seconds to enter Bluetooth Pairing mode. Note: The earbuds can only manually enter Bluetooth Pairing mode when no audio is being played.

Powering On / Off Earbuds Manually

• Power On: Tap and hold for 6 seconds
• Power Off: Tap and hold for 6 seconds

Creative App

Set up your product, customize playback controls, personalize audio settings, enhance product's performance, and more with the Creative app.

• Customize buttons for personalized playback experience
• Adjust noise control level through Ambient Mode and Active Noise Cancellation
• Modify audio settings with Graphic EQ
• Perform software upgrades, product registration, and more

Download the Creative App from:

• iOS App Store
• Google Play Store

Charging Creative Outlier Pro Wirelessly

Creative Outlier Pro supports Qi-enabled wireless charging. To charge both the charging case and earbuds wirelessly, slot the earbuds into the case's magnetic charging slots, then place the charging case on the wireless charging pad*. Do note that the earbuds cannot be charged wirelessly without its charging case.

*Wireless charging pad not included

Earbuds Fit Guide

Gently push and wiggle the earbuds into the respective ear canal until a good seal is made to ensure proper fitting. Additional pairs of silicone tips are also provided so users can achieve an optimal fit.

1. Push gently. 2. Wiggle gently. 3. Ensure seal. 4. Optimal fit.

Master Reset

Touch both earbuds and hold for 5 seconds while they are in the charging case to perform a Master Reset. Upon completion, earbuds will blink three times in blue. Master Reset is reserved for cases where users encounter issues while earbuds are in use or during situations such as: Bluetooth Pairing failure, random LED blinking, failure to pair secondary earbud with the main earbud, or to reset all data.

Common Connectivity Issues

This article highlights a phenomena and recommendation for music cutting out and earbuds that do not stay connected.

When pairing a smart mobile device with TWS (True Wireless Stereo) earbuds, the signal is strongest when there is a line-of-sight between the pairing devices.

If the signal passes through the body, which is mostly made up of water fluid, it may get absorbed, which may result in pairing difficulty. If the mobile device is already connected to the TWS earbuds, it may result in signal lost or the earbuds may get disconnected.

Technical Specifications

Headphones Drivers

• 10 mm Graphene-coated Drivers x 2
• Frequency Response: 20–20,000 Hz

Microphones

• Type: Omni-directional x 6
• MEMS
• Frequency Response: 100–10,000 Hz
• Sensitivity (1 kHz): -38 dBV / Pa

Interface

• Qi-compatible wireless charging, USB-C (charging)

Bluetooth Version

• Bluetooth 5.2

Bluetooth Profiles

• A2DP (Wireless stereo Bluetooth)
• AVRCP (Bluetooth remote control)
• HFP (Hands-free profile)

Wireless Operating Range

• Up to 10m / 33 ft
• Maximum RF Output Power: 10 dBm
• Operating Frequency: 2402–2480 MHz

Battery

• Earbuds (Left and Right): Lithium-ion polymer battery: 3.6V 85 mAh 0.306 Wh
• Battery Charging Case: Lithium-ion polymer battery: 3.7V 900 mAh 3.330 Wh

Input Rating

• 5V 1A

Total Playtime

• Up to 60 hours

Charging Time

• 2–3 hours (Wired / wireless charging)

Audio Codecs

• AAC, SBC

Operating Temperature

• 0–45°C

Other Information

Please visit creative.com/compliance/OutlierPro for the user guide, safety and regulatory information, ErP information where applicable and battery removal instruction which is meant strictly for independently qualified professional.

Please visit creative.com/support/OutlierPro for all other support related to your product.

Note: Compliance markings are located at the bottom of the product.