Creative Outlier Gold True Wireless Sweatproof In-Ear Headphones

Model No.: EF0840

1. Overview

Introduction to the Creative Outlier Gold True Wireless Sweatproof In-Ear Headphones.

2. Battery Charging

Instructions for charging the earbuds and the charging case.

Charging Case Indicators:

Battery Level: Blue (30-100%), Red (<30%)
Charger Indicator: OFF (Full), Blue (Charging)

Earbud Operation: The earbuds automatically turn on when removed from the charging case and turn off when placed back.

Note: Remember to charge the charging case and earbuds regularly, even for long-term storage, to maintain battery health and capacity.

3. Bluetooth Pairing

Follow these steps to pair your earbuds with a device:

i) Initial Pairing

The first earbud removed from the charging case acts as the main unit.

ii) Pairing of the Second Earbud

A Bluetooth pairing request for the secondary earbud will appear automatically after the initial pairing with the main earbud. The second earbud will then pair with the main earbud.

iii) Subsequent Pairing

To pair with a new device:

Ensure Bluetooth is OFF on the previously paired device.
Press and hold the main earbud for three seconds.
When the earbud flashes red and blue, it is in Bluetooth Pairing mode.
Pair the earbuds with your desired device.

4. Controls

Voice Assistant: Activate the voice assistant by pressing the main earbud's button twice (x2).

Button press actions include single press, double press, press and hold for 3 seconds, and press and hold for 5 seconds.

5. Incoming Calls

Information on handling incoming calls.

6. Earbuds Fit Guide

For optimal fit and sound quality, gently push and wiggle the earbuds into the respective ear canals until a good seal is achieved.

7. Master Reset

The earbuds will flash blue when the Master Reset is complete. This is useful for troubleshooting issues like Bluetooth pairing failure, random LED flashing, or failure to pair the secondary earbud. It resets all data to factory settings.

8. Technical Specifications

Feature	Specification
Headphone Drivers	5.6 mm Graphene-enhanced Driver
Frequency Response	20–20,000 Hz
Microphones Type	Omni-directional
Microphone Frequency Response	100–10,000 Hz
Microphone Sensitivity (1 kHz)	-42 dBV / Pa
Interface	USB Type-C (charging), Bluetooth 5.0
Bluetooth Profiles	A2DP, AVRCP, HFP
Wireless Operating Range	Up to 10m / 33 ft
RF Output Power	< 4 dBm
Operating Frequency	2402–2480 MHz
Charging Time	2 hours
Play Time	Up to 39 hours
Audio Codec	SBC, aptX™, AAC
Operating Temperature	0–45°C
Earpiece Battery (Left and Right)	Lithium-ion polymer battery: 3.7V 80 mAh 0.296 Wh
Battery Charging Case	Lithium-ion polymer battery: 3.7V 450 mAh 1.665 Wh
Input	5V 1A

Note: Compliance markings are located at the bottom of the product.

Troubleshooting: Connection Issues

Summary: This section addresses music cutting out and earbuds not staying connected.

When pairing a smart mobile device with TWS (True Wireless Stereo) earbuds, the signal is strongest with a clear line-of-sight. If the signal passes through the body (which is largely fluid), it can be absorbed, leading to pairing difficulties or signal loss. To mitigate this, it is recommended to place the smart mobile device on the same side as the main connected earbud to bypass the body barrier. For example, if the left earbud is the main unit, keep the mobile device in your left pocket.

Compliance and Warranty

Hereby, Creative Labs Pte. Ltd. declares that the Bluetooth headset, model no. EF0840, is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at http://www.creative.com/EUDoC.

Creative warrants the product against material or workmanship defects for 12 months from the purchase date. For full warranty details, terms, returns, and support, please visit http://creative.com/warranty.

	Creative Outlier Pro True Wireless Earbuds Quick Start Guide and Specifications Get started with your Creative Outlier Pro True Wireless Earbuds. This guide covers setup, controls, charging, technical specifications, app integration, and troubleshooting common connectivity issues.
	Creative Outlier Air / Air Sports True Wireless Earbuds: User Manual & Specifications Comprehensive guide for Creative Outlier Air and Outlier Air Sports true wireless earbuds, covering setup, controls, technical specifications, and troubleshooting. Learn how to pair, charge, and optimize your listening experience.
	Creative Outlier Free Mini Bone Conduction Bluetooth Headphones - Quick Start Guide Get started with your Creative Outlier Free Mini bone conduction Bluetooth headphones. This guide covers setup, controls, charging, multipoint pairing, master reset, and technical specifications.
	Creative Outlier Air V3 Quick Start Guide and Technical Specifications Comprehensive guide for Creative Outlier Air V3 True Wireless Stereo Earbuds, covering setup, controls, troubleshooting, technical specifications, and warranty information.
	Creative Outlier Free Wireless Bone Conduction Headphones - Quick Start Guide Concise guide to setting up and using Creative Outlier Free wireless bone conduction headphones with Bluetooth 5.3. Includes controls, pairing, LED indicators, and technical specifications.
	Creative Outlier Free+ Wireless Bone Conduction Headphones Quick Start Guide Concise guide for Creative Outlier Free+ wireless bone conduction headphones, covering setup, controls, pairing, charging, troubleshooting, and technical specifications.
	Creative Zen Air Pro Quick Start Guide and Specifications Comprehensive guide for the Creative Zen Air Pro wireless earbuds, detailing controls, connectivity features like Bluetooth LE Audio modes (Unicast, Broadcast, ULL), technical specifications, app integration, and warranty information.
	Creative Zen Hybrid Wireless ANC Headphones: Quick Start Guide & Specifications Comprehensive guide for Creative Zen Hybrid wireless over-ear headphones with Hybrid Active Noise Cancellation. Includes setup, controls, technical specifications, and warranty information.