Zinus Ironline Metal and Wood Platform Bed with Footboard

Components

Assembly Instructions

Numbering System: Easy assembly by following 1,2,3...

Numbers must match for secure assembly.

Step 1

Attach component A (Headboard Post - Left) to component B (Headboard Post - Right) using two L bolts. The diagram shows component A and B being joined at the top, with two L bolts inserted through pre-drilled holes.

Step 2

Attach component A (Headboard Post - Left) to component B (Headboard Post - Right) using two L bolts. This step appears to be a repetition or continuation of Step 1, showing the same connection with L bolts.

Step 3

Connect component B (Headboard Post - Right) to component C (Side Rail Connector - Left) using two L bolts. The diagram shows the lower part of the headboard post connecting to the side rail connector.

Step 4

Connect component B (Headboard Post - Right) to component C (Side Rail Connector - Left) using two L bolts. Similar to Step 3, this shows the connection of the headboard post to the side rail connector.

Step 5

Attach component D (Side Rail Connector - Right) to component E (Side Rail - Left) using two S screws. The diagram shows the side rail connector being attached to the side rail with screws.

Step 6

Attach component D (Side Rail Connector - Right) to component E (Side Rail - Left) using two S screws. This step shows the same connection as Step 5.

Step 7

Attach component C (Side Rail Connector - Left) to component D (Side Rail Connector - Right) using two S screws. The diagram shows the two side rail connectors being joined.

Step 8

Attach component C (Side Rail Connector - Left) to component D (Side Rail Connector - Right) using two S screws. This step shows the same connection as Step 7.

Step 9

Connect component F (Side Rail - Right) to component G (Footboard Post - Left) using two S screws. The diagram shows the side rail connecting to the footboard post.

Step 10

Connect component F (Side Rail - Right) to component G (Footboard Post - Left) using two S screws. This step shows the same connection as Step 9.

Step 11

Attach component G (Footboard Post - Left) to component H (Footboard Post - Right) using two S screws. The diagram shows the two footboard posts being joined.

Step 12

Attach component G (Footboard Post - Left) to component H (Footboard Post - Right) using two S screws. This step shows the same connection as Step 11.

Step 13

Connect component G (Footboard Post - Left) to component A (Headboard Post - Left) using two S screws. The diagram shows the footboard post connecting to the headboard post.

Step 14

Connect component G (Footboard Post - Left) to component A (Headboard Post - Left) using two S screws. This step shows the same connection as Step 13.

Step 15

Attach component J (Center Support Beam) to component I (Support Leg) using one M bolt. The diagram shows the center support beam being attached to the support leg.

Step 16

Attach components A, C, and J to the frame using S screws. The diagram shows multiple connection points being secured with screws. It also indicates to place noise-free tape on the underside of the slats support rails.

Step 17

Place the slats support rails (K) onto the frame. The diagram shows the bed frame with the two slats support rails positioned.

Step 18

Place the wooden slats across the support rails. The diagram shows the slats being laid out. It also indicates to peel off the upper strip of the non-slip tape, which helps keep the mattress in place.

Step 19

The completed bed frame is shown. The diagram depicts the fully assembled Ironline Metal and Wood Platform Bed with Footboard.

Return Policy

Zinus believes you will absolutely love your Ironline Metal and Wood Platform Bed with Footboard. If for some reason you want to return the product, please contact us directly before you decide to return your product to the retailer. Our Customer Service organization can answer most concerns and can assist you with any questions you may have about your new product.

Please contact us first by emailing customerservice@zinusinc.com or by submitting a request at https://support.zinus.com.

The item must be returned in good condition, in original box, with all original proof of purchase, parts and accessories, within the time frame specified by the retailer it was purchased from.

5-Year Limited Warranty Statement For Manufacturing Defects

Please read this Limited Warranty carefully. To maintain your Warranty, you will need to comply with the conditions stated here. This warranty is for manufacturing defects only and does not cover damages as a result of misuse.

1. Please be sure to register your product at www.zinus.com/resources/register to receive up to date warranty and product information.
2. Your new product comes with a 5-year warranty against manufacturing defects. The warranty starts on the date of purchase. No warranty will be honored without an original sales receipt. The warranty and financial responsibility of the manufacturer only applies to the product itself and does not extend to any mattress that is put on the product.
3. Manufacturing defects include circumstances where the product has broken under normal use and no longer provides proper support for your mattress. Proper support is defined as a smooth, flat, rigid surface. In the event you encounter a manufacturing defect, please stop using this product immediately and call customer service. Please note that it is not uncommon for some of the short metal welds to become loose in transit or during normal use. A manufacturing defect for these welds is considered to be 5 or more at the time of purchase. The manufacturer cannot be responsible for improper assembly by the consumer.
4. This warranty applies only when the product has been properly used by consumers who purchased the product from authorized dealers as a new product. Proper use means using the product on a level surface where all legs touch the floor with an equal distribution of weight. Proper use also means that the product was not abused by the consumer, as defined by the manufacturer. This warranty does not constitute agreement to replace other parts.
5. If the product fails due to manufacturing defects, the manufacturer will repair or replace at its discretion and reserves the right to substitute comparable materials or models and does not guarantee that the replacement part will match the existing piece or product.
6. In the event the product needs to be inspected by the manufacturer to determine a warranty claim, the transportation cost or removal cost is borne by the consumer.