Classic Framed Wood Platform Bed Assembly Instructions
Parts List
| Identifier | Part Name | Quantity |
|---|---|---|
| A | Headboard | 1 pc. |
| B | Footboard | 1 pc. |
| C | Side Rail A - Head | 1 pc. |
| D | Side Rail A - Foot | 1 pc. |
| E | Side Rail B - Head | 1 pc. |
| F | Side Rail B - Foot | 1 pc. |
| G | Footboard Leg A | 1 pc. |
| H | Footboard Leg B | 1 pc. |
| I | Side Rail Support Legs | 2 pcs. |
| J | Headboard Leg (L) | 1 pc. |
| K | Headboard Leg (R) | 1 pc. |
| L | Headboard Strut | 1 pc. |
| M | Center Supports | 2 pcs. |
| N | Bed Slats | 2 sets |
| O | Center Legs | 4 pcs. |
| P | M8x20mm Bolts | 8 pcs. |
| Q | M6x25mm Bolts | 8 pcs. |
| R | M6x50mm Bolts | 23 pcs. for Twin, Twin XL; 24 pcs. for Full; 25 pcs. for Queen |
| S | M4x30mm Screws | 8 pcs. |
| T | M4 Allen Key | 1 pc. |
| U | M5 Allen Key | 1 pc. |
| V | M4x16mm Screws | 8 pcs. |
Tools Needed: Phillips Screwdriver
Assembly Steps
-
Attach Headboard Legs (J, K) to the Headboard (A) using Bolts (P) and Allen Key (T). Attach the Headboard Strut (L) to the Headboard (A) using Bolts (R) and Allen Key (U). Note: The wood strut (L) will use 3 bolts (R) for Twin and Twin XL sizes, and 4 bolts (R) for Full size. Do not tighten all bolts completely, leave a 2-5mm gap.
Diagram shows attaching legs J and K to headboard A with bolts P and T. Strut L is attached to headboard A with bolts R and U. A note indicates the number of bolts R for different bed sizes and advises leaving a gap.
-
Attach Footboard Legs (G, H) to the Footboard (B) using Bolts (P) and Allen Key (T). Attach the Footboard (B) to the Side Rails (C, D, E, F) using Bolts (R) and Allen Key (U). Do not tighten all bolts completely, leave a 2-5mm gap.
Diagram shows attaching legs G and H to footboard B with bolts P and T. Footboard B is attached to side rails C, D, E, F with bolts R and U. A note advises leaving a gap.
-
Attach the assembled Headboard and Footboard sections to the Side Rails (C, D, E, F) using Bolts (R) and Allen Key (U). Insert Center Supports (M) and attach Bed Slats (N) using Screws (V). Ensure slats are evenly spaced.
Diagram shows connecting the headboard and footboard assemblies to the side rails. Center supports M are placed, and bed slats N are attached with screws V. A close-up shows the attachment of slats to the side rail.
-
Attach Side Rail Support Legs (I) to the Side Rails (C, D, E, F) using Bolts (Q) and Allen Key (T).
Diagram shows attaching support legs I to the side rails C, D, E, F using bolts Q and Allen key T.
-
Connect the Headboard (A) and Footboard (B) sections to the Side Rails (C, D, E, F) by aligning the pre-drilled holes and inserting the appropriate bolts. Ensure the frame is stable.
Diagram shows the headboard and footboard being connected to the side rails, with the word "HANG" indicating alignment.
-
Place the Bed Slats (N) across the Side Rails and secure them using Screws (S).
Diagram shows placing bed slats N and securing them with screws S.
Important Note: Lift the bed with two or more people. Dragging the bed may cause damage.
