TECKNET Wireless Mouse - Model: TK-M5006 User Manual

Package Contents

• 1 x Wireless Mouse
• 1 x USB Receiver
• 1 x User Manual

Product Overview

The TECKNET wireless mouse (Model: TK-M5006) features:

• ① Left Click Button
• ② Scroll Wheel
• ③ Right Click Button
• ④ DPI Button
• ⑤ On/Off Switch
• ⑥ Battery Compartment
• ⑦ USB Receiver

Specifications

• Working Voltage: 1.5V
• Working Current: 12mA
• Operating Frequency: 2.4GHz
• Transmission Power: 0 dBm
• Systems Compatible: Windows 2000/ME/XP (x64)/Vista/7/8/10/11, macOS X10.4 or later

How to Use

1. Open the battery cover at the bottom of the mouse. Insert 1 AA battery, observing the polarity instructions (+/-).
2. Take out the USB receiver and plug it into a USB-A port on your computer.
3. Replace the battery cover. Turn on the mouse using the On/Off switch. The mouse is now ready to use.

To Change DPI: Press the DPI button to cycle through 3 DPI levels.

Solutions for Connectivity Issues

1. Unplug the USB receiver and plug it back in.
2. Remove the battery and reinsert it with the correct polarity direction.
3. Turn on the mouse within 20 seconds; it should then work normally.

IMPORTANT SAFETY INSTRUCTIONS

1. Retain these instructions for future reference.
2. Read all instructions and caution markings before use.
3. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised.
4. Children should be supervised to ensure they do not play with the appliance.
5. Keep the product away from fire to avoid explosion.
6. Observe polarity indicators (+/-) for proper battery insertion.
7. Remove batteries if the product will not be used for a long period.
8. Do not place the product near flammable, explosive, or hazardous objects.
9. Do not operate if the product is damaged.
10. Do not disassemble the product, as this may result in safety hazards.
11. Do not throw or shake the product.
12. Do not place the product in or near water, rain, excess moisture, or extreme heat.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, try to correct the interference by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consulting the dealer or an experienced radio/TV technician.

NOTE 2: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

Correct Disposal of This Product: This marking indicates that the product should not be disposed of with other household wastes. Please separate it from other wastes and recycle it responsibly to promote the sustainable reuse of material resources. Contact the retailer or local government for details on environmentally safe recycling.

SIMPLIFIED EU DECLARATION OF CONFORMITY

Shenzhen Unichain Technology Co., Ltd declares that the product type TK-MS006 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://eu.tecknetonline.com/

Limited 12-Month Warranty

What this warranty covers

Shenzhen Unichain Technology Co., Ltd (Manufacturer: "Unichain") warrants to the original purchaser that this TeckNet product shall be free of defects in design, assembly, material, or workmanship.

Period of coverage

Unichain warrants the TECKNET product for 12 Months.

Problem correction

Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges).

What is not covered by this warranty

Warranties are void if the TeckNet product is not provided for inspection upon Unichain's request, or if Unichain determines the product has been improperly installed, altered, or tampered with. The warranty does not cover acts of God, normal wear and tear, abuse, or damage due to low-voltage disturbances, non-authorized programs, or system equipment modification.

How to claim the warranty

Please contact retailers, visit the TECKNET website, or email support@tecknetonline.com. To extend the warranty, register your TECKNET products on the TECKNET website within 80 days of purchase.

Disclaimer

Every effort has been made to ensure the accuracy and completeness of the information in this guide. Unichain accepts no liability for any errors or omissions and reserves the right to make changes without further notice.