Smart Card Instruction

THE FIRST TIME

Press the button of the Find My Accessory for 1 time, you will hear a consecutive ringtone.

WORKING WITH APPLE FIND MY APP

For iOS device users, add your device to the Find My app, which is pre-installed in the iOS system. It enables you to track your device with the help of millions of Apple devices worldwide, and ensures privacy protection.

What You Need?

• An iPhone, iPad, or iPod touch with iOS 14.5 or later, with two-factor authentication enabled.
• Find My and Bluetooth enabled.
• A strong Wi-Fi or cellular connection.
• Location Services turned on: `Settings > Privacy > Location Services`.
• For Precision Finding, enable Location Access for Find My: 'Settings > Privacy > Location Services', scroll and tap on Find My, choose 'While Using the App / Widgets', then enable Precision Location.

Add Your Device:

1. Open the Find My app, go to the Items tab, select Add Item > Other Supported Item.
2. Press the button of the Find My Accessory for 1 time, you will hear a consecutive ringtone.
3. Choose an item name from the list or select a custom name for your Find My Accessory, pick an emoji, then tap Continue.
4. To register the Find My Accessory with your Apple ID, tap the agree button.
5. Tap Done. Now you can attach your Find My Accessory to your item and track it in the Find My app.

If you can't set up your Find My Accessory

• Ensure your Find My Accessory is ready for setup.
• If setting up multiple Find My Accessories, keep only one near your device at a time.
• If your Find My Accessory still won't connect, try resetting it.

If your Find My Accessory is connected to another Apple ID

Ensure you've removed this Find My Accessory in the Find My app if planning to use another Apple ID.

Perform Serial Number Lookup

1. Launch the "Find My" app on your iPhone.
2. Scroll to the bottom of the "Items" tab, then tap "Identify Found Item".
3. Keep the Find My accessory near the iPhone. Once the iPhone has detected the Find My accessory, select it from the list of found items.
4. You will be taken to a page where you can learn about the item.
5. Locate the button on the front of the Find My accessory and press it once; you will hear a confirmation sound.
6. Once connected to the Find My accessory, tap "Continue On Website" to see if the owner has left a Lost Mode message and view the item's serial number.

Disable Find My Network (Power Off)

Press and hold the button for 6 seconds within a 10-second timeframe. After releasing, hear 2 short rings followed by 1 long ring.

RESET

1. Quickly press the button 5 times within 5 seconds.
2. Press and hold the button for 6 seconds. After releasing, hear a ring.
3. Your Find My Accessory has been successfully reset.

FCC Compliance Statements

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.