Neath Solid Oak Sliding Door Wardrobe

Product Code: PO-Y00E05

Hardware and Components

Identifier	Description	Quantity
A	Screw	2
B	M6*30 Screw	50
C	Ø6*14 Screw	50
D	Ø6*12 Screw	50
E	M3.5*30 Screw	19
F	Adjustable Levelling Foot	4
G	M6*25 Screw	4
H	Felt Pads	6

The assembly begins with an exploded view of the wardrobe, showing its main structural components: two side panels, a top panel, a bottom panel, a back panel, internal shelves, and sliding doors. The diagram indicates how these parts connect, with numbered callouts corresponding to different sections of the wardrobe structure.

Assembly Instructions

Step 1: Attach Side Panels, Internal Dividers, and Clothes Rails

Begin by attaching the side panels, internal dividers, and clothes rails. This step involves connecting these structural elements using hardware identified as A, B, C, and D.

The diagram shows the initial assembly of the wardrobe frame. Side panels are connected to internal dividers and a central support structure. Clothes rails are also shown being fitted into place. Specific connection points are highlighted, indicating where screws (A, B, C, D) should be used.

Step 2: Install Top Panel, Bottom Panel, and Detachable Kickboard

Next, install the top panel, bottom panel, and the detachable kickboard. These components form the main enclosure of the wardrobe. Hardware A, B, C, and D are used for these connections.

This diagram illustrates the addition of the top and bottom panels to the partially assembled frame. The kickboard is shown being attached to the front base. The diagram emphasizes the correct orientation and connection points for these panels.

Step 3: Install the Back Panel

Install the back panel of the wardrobe. This is typically done by securing it to the rear edges of the side, top, and bottom panels using screws labeled E.

The diagram shows the wardrobe frame from the rear. The back panel is being slid into place and secured with multiple screws (E) along its perimeter. Close-up views highlight the screw insertion points. Notes are provided: one advises removing the skirting board with Allen key (A) if needed, and another instructs to hand-tighten the adjustable feet (F) to keep the cabinet level within the base frame.

Step 4: Install the Wardrobe Doors

Finally, install the wardrobe doors. The diagram shows the doors being hung and adjusted.

The diagram depicts the wardrobe with its doors being fitted. An arrow indicates the general direction of installation. A note explains that adjustment holes at the four corners of the wardrobe base should be used to level the cabinet.

	Humbie Natural Solid Oak Bench Seat Assembly Instructions - Y28T76 Detailed assembly instructions and parts guide for the Humbie Natural Solid Oak Bench Seat (Model Y28T76) from Oak Furniture Store. Learn how to attach legs using the provided hardware.
	Humbie Natural Solid Oak Sofa Bed Assembly Instructions Assembly instructions for the Humbie Natural Solid Oak Sofa Bed from Oak Furniture Store, detailing components and step-by-step guidance for proper assembly.
	Humbie Solid Oak Study Desk Assembly Instructions Assembly instructions for the Humbie Solid Oak Study Desk (Model Y2884) from Oak Furniture Store. Includes parts list and step-by-step visual guidance for assembly.
	Berlin Natural Solid Oak Bed Frame Assembly Guide \| W0430 Detailed assembly instructions and parts list for the Berlin Natural Solid Oak Bed Frame (Model W0430) from Oak Furniture Store. Learn how to assemble your new bed frame with clear diagrams and hardware identification.
	Nest Solid Walnut Round Dining Table Assembly Instructions \| PO-K35R08130 \| Oak Furniture Store Step-by-step assembly guide for the Oak Furniture Store Nest Solid Walnut Round Dining Table (Model PO-K35R08130). Includes a complete parts list and detailed instructions for attaching legs to the base hub.
	Kemi Cream Tulip Poplar Painted Harp Bed Frame Assembly Guide Assembly instructions and parts list for the Kemi Cream Tulip Poplar Painted Harp Bed Frame from Oak Furniture Store. Includes diagrams and hardware details.
	Kassel Rattan Study Office Chair Assembly Instructions Assembly guide for the Kassel Rattan Study Office Chair, model PO-S03138M060, from Oak Furniture Store. Provides a parts list and step-by-step assembly instructions.
	Kemi Natural Solid Beech Harp Bed Frame Assembly Instructions Step-by-step assembly guide and parts list for the Kemi Natural Solid Beech Harp Bed Frame from Oak Furniture Store, including hardware specifications and assembly tips.