Material de instalación y accesorios
Prensaestopas
CMP-32A2FRC N° de art. 243629
Key Features
- Cable connection for Ex-d and Ex-e cables with or without metallic wire armour in rigid conduits.
- Outer cable sheath insulation via explosion-protected sliding seal.
- International authorization according to IECEx, ATEX, and CSA.
The metallic cable connections Ex e and Ex d of the A2FFC series are manufactured for all types of unarmoured cables and cables with metallic fabric armour that are to be installed in flexible or rigid conduits with rubber sheathing or coating. Installation is very simple thanks to a rotating connector. The cable connections are designed to prevent cold flows.
Technical Data
Explosion Protection
| Property | Value |
|---|---|
| Model Ex | Ex eb & Ex db & Ex nR & Ex ta |
| Applications (zones) | 1, 2, 20, 21, 22 |
| IECEX gas certification | IECEx CML 18.0179X |
| IECEx gas explosion protection | Ex db eb IIC Gb |
| IECEx dust certification | IECEx CML 18.0179X |
| IECEx dust explosion protection | Ex ta IIIC Da |
| IECEx methane certification | IECEx CML 18.0179X |
| IECEx safety of vapours certification | IECEx CML 18.0179X |
| IECEx vapour resistant | Ex nR IIC Gc |
| ATEX gas certification | CML18ATEX1321X |
| ATEX gas 2 certification | CML18ATEX4313X |
| ATEX gas explosion protection | II 2 G Ex db eb IIC Gb |
| ATEX dust certification | CML18ATEX1321X |
| ATEX dust explosion protection | II 1 D Ex ta IIIC Da |
| ATEX methane certification | CML18ATEX1321X |
| ATEX vapour resistant certification | CML18ATEX1321X |
| ATEX vapour resistant | II 3 G Ex nR IIC Gc |
Note: Product descriptions and certificates can be downloaded from the manufacturer's website (www.cmp-products.com).
Mechanical Data
| Property | Value |
|---|---|
| Model | 32 |
| Clamping ring | No |
| Degree of protection (IP) | IP66 |
| Degree of protection note | Mounting according to CMP manufacturer's instructions |
| Degree of protection IP (IEC 60079) | IP66 |
| Type of protection (IP) UL | IP66 |
| Gasket material | SOLO LSF |
| Silicone-free | Yes |
| Halogen-free | Yes |
| Clamping range | 17 - 26.3 mm |
| Type of armour 2 | Braided safety armour |
| Clamping range | 17 ... 26.3 mm |
| Construction type | BS 6121, IEC/EN 62444 |
| Distance between flats | 45.1 mm |
| Wrench width | 41 mm |
| Thread size | M32 |
| Thread length | 15 mm |
| Thread pitch | 1.5 |
| Thread standards | metric |
| Thread connection size | 32 |
| Internal coating | 32 |
| Conduit internal thread | M32 |
| Projection length | 55.5 mm |
| Impact resistance (IEC 60079) | 7 J |
| Impact resistance | 20 J |
| PVC cap | PVC10 |
| Weight | 240 g |
| Weight | 0.53 lb |
Measurement diagram (all measurements in [mm]) – Subject to modifications
Diagram Description:
The diagram shows a cross-section of the cable gland with various dimensions labeled:
- A = Internal coating
- C = Thread size
- D = Distance between flats
- D = Wrench width
- E = Thread length
- F = Projection length
- G = Conduit internal thread
R. STAHL reserves the right to modify technical data, dimensions, weights, constructions, and delivery options.
