R. STAHL CMP-50sA2FRC Cable Gland
Material de instalación y accesorios
N° de art. 243631
Product Description
The CMP-50sA2FRC cable glands are designed for all types of unarmored cables and metallic fabric-armored cables installed in rigid or flexible conduits with rubber coating or sheathing. Installation is simplified by a rotating connector. These cable glands are engineered to prevent cold flow.
- Cable connection for Ex-d and Ex-e for unarmored cables and metallic fabric-armored cables in rigid conduits.
- Exterior cable sheath insulation via a sliding seal protected against explosion.
- International authorization according to IECEx, ATEX, and CSA.
Technical Data
Explosion Protection
| Model Ex | Applications (zones) | IECEx gas homologation | IECEx gas explosion protection | IECEx dust homologation | IECEx dust explosion protection | IECEx firedamp homologation | IECEx protection against vapors | IECEx vapor resistant | ATEX gas homologation | ATEX gas 2 homologation | ATEX gas explosion protection | ATEX dust homologation | ATEX dust explosion protection | ATEX firedamp homologation | ATEX vapor resistant certificate | ATEX vapor resistant | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ex eb & Ex db & Ex nR & Ex ta | 1, 2, 20, 21, 22 | IECEX CML 18.0179X | Ex db eb IIC Gb | IECEX CML 18.0179X | Ex ta IIIC Da | IECEX CML 18.0179X | IECEx CML 18.0179X | Ex nR IIC Gc | CML18ATEX1321X | CML18ATEX4313X | II 2 G Ex db eb IIC Gb | CML18ATEX1321X | II 1 D Ex ta IIIC Da | CML18ATEX1321X | CML18ATEX1321X | II 3 G Ex nR IIC Gc | Manufacturer's website for product descriptions and certificates (www.cmp-products.com) |
Mechanical Data
| Model | Clamping | Degree of protection (IP) | Degree of protection note | IP protection grade (IEC 60079) | UL IP protection type | Seal material | Silicone-free | Halogen-free | Clamping range | Armor type 2 | Clamping range | Construction type | Dimension across flats | Wrench width | Thread size | Thread length | Thread pitch | Thread standards | Thread connection size | Internal coating | Conduit internal thread | Projection length | Impact resistance (IEC 60079) | Impact resistance | PVC cap | Weight | Weight | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 50s | No | IP66 | Mounting according to CMP manufacturer's instructions | IP66 | IP66 | SOLO LSF | Yes | Yes | 31 – 38.2 mm | Braided safety cable | 31 ... 38.2 mm | BS 6121, IEC/EN 62444 | 60.5 mm | 55 mm | M50 | 15 mm | 1.5 | Metric | 50s | 31 | 38.2 mm | M50 | 59.1 mm | 7 J | 20 J | PVC15 | 430 g | 0.95 lb |
Measurement diagram (all measurements in [inches]) – Subject to modifications
Diagram showing dimensions with labels: A = Internal coating, C = Thread size, D = Dimension across flats, D = Wrench width, E = Thread length, F = Projection length, G = Conduit internal thread.
R. STAHL reserves the right to modify technical data, dimensions, weights, constructions, and delivery options.
Contact Information
R. STAHL Schaltgeräte GmbH | Am Bahnhof 30 | 74638 WALDENBURG
Tel. +49 7942 943 1700 | +49 7942 943 1777 | Email: sales.de@r-stahl.com | r-stahl.com
