Arcade1Up Wireless Giant Joystick with HDMI Game Console

Safety Information

⚠️ Epilepsy Warning

A very small percentage of individuals may experience epileptic seizures or blackouts when exposed to certain light patterns or flashing lights. Exposure to certain patterns or backgrounds on a television screen or when playing video games may trigger epileptic seizures or blackouts in these individuals. To reduce the risk of such a seizure incident, it is recommended to take a 10-15 minute break at each hour of playing.

Battery Safety Notice

• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the device before being charged (if removable).
• Rechargeable batteries are only to be charged under adult supervision.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
• Only batteries of the same or equivalent types, as recommended, are to be used.
• Batteries are to be inserted with the correct polarity.
• Remove batteries before storing.
• Exhausted batteries are to be removed from the device.
• Always use alkaline batteries.
• Do not dispose of batteries in fire; batteries may explode or leak.
• The supply terminals are not to be short-circuited.

Note: All packaging materials should be removed by an adult before giving this product to children!

Product Features

• 2.4 GHz wireless Giant Joystick
• Includes HDMI and USB cables
• Up to 25 ft. (7.6m) gaming range

Setup and Connection

Battery Installation

To install batteries:

1. Please make sure the controller is turned OFF or in Auto OFF mode.
2. Pull the locking slot on the bottom of the Giant Joystick and flip the Foot Step [Fold out the foot step from the bottom of base to stabilize your joystick during game play].
3. Remove the battery box cover.
4. Insert 2 AA alkaline batteries (1.5V AA/LR6) in the battery box, ensuring that negative (-) and positive (+) poles are positioned properly.
5. Replace the battery box cover; be sure not to over-tighten the screw.

Game Console Setup

1. Connect the HDMI cable to your TV and the Game Console (ensure devices are OFF).
2. Connect the Micro USB cable (included) to a USB power supply to power ON the game console.
3. Press the Power Button on top of the Game Console to power ON. The power indicator light on top will turn RED, and then the TV will enter the game.

Note: Make sure your TV is on the correct HDMI auxiliary input.

Connecting Your Controller

You can connect your Giant Joystick to the Game Console in two ways: Wireless or USB Power Connection.

Wireless Connection

1. Make sure the Giant Joystick power is OFF.
2. Insert two 1.5V AA batteries into the battery compartment.
3. Turn ON the power switch on the Game Console, Giant Joystick, and TV. The indicator lights on the Game Console and Giant Joystick will light up RED.
4. Use the Giant Joystick to select a game and press the [A Button] to enter the game. Game controls will be displayed.
5. Hold the [Player 1 Button] for 5 seconds to return to the main menu. Hold the [Player 2 Button] for 5 seconds to reset the game.

For the second Giant Joystick connection (Wireless):

1. Ensure the first Giant Joystick is ON and the second Giant Joystick is OFF.
2. Insert two 1.5V AA batteries into the second joystick's battery compartment.
3. Hold the [Player 1 Button] and [A Button] simultaneously, then turn ON the power switch of the second Giant Joystick (its indicator light will flash RED). Then, turn OFF the first Giant Joystick.
4. Once the second Giant Joystick is connected successfully, its indicator light will turn solid RED. Then, turn ON the first Giant Joystick.

USB Power Connection

1. Slide the Giant Joystick's power switch to the OFF position (left side for wired connection).
2. Use a Micro USB cable (not included) to connect the Giant Joystick to the Game Console. If the red indicator light on the Giant Joystick is always ON, the connection is successful.
3. Use the Giant Joystick to select a game and press the [A Button] to enter the game. Game controls will be displayed.
4. Hold the [Player 1 Button] for 5 seconds to return to the main menu. Hold the [Player 2 Button] for 5 seconds to reset the game.

For the second Giant Joystick connection (USB Power):

1. Ensure the second Giant Joystick has been connected successfully wirelessly.
2. Slide the second Giant Joystick's power switch to the OFF position (left side for wired connection).
3. Use a Micro USB cable (not included) to connect the second Giant Joystick to the game console. If the red indicator light on the second Giant Joystick is always ON, the connection is successful.

Note: Turn the Giant Joystick power switch to the left for wired (USB) connection and to the right for wireless connection.

Controller Ports and Buttons Description:

• Game Console: HDMI Port, Micro USB Power Port, Power Button, two USB Right Action Ports.
• Giant Joystick: Power Button (switch selects Wireless/USB), Reset Button (hold for 5 seconds to return to main menu), Left Action Button, Right Action Button, 'A' Button, Indicator Light.

Game Controls

General Controls:

1. Use the Joystick to scroll through the game list.
2. Press the [A Button] to choose a game.
3. Follow the specific game controls listed below for each game.
4. Hold the [Player 1 Button] (5 seconds) to return to the main menu and save a high score.
5. Hold the [Player 2 Button] (5 seconds) to reset the game.

Game-Specific Controls:

• Pac-Man™ / Pac-Mania™: Player 1/2 Joystick: Move. Button A: Action.
• Dig Dug™: Player 1/2 Joystick: Move. Button A: Pump / Fire.
• Dragon Spirit™: Player 1/2 Joystick: Move. Button A: Fire.
• Galaga™ / Galaga™ '88: Player 1/2 Joystick: Move. Button A: Fire.
• Mappy™: Player 1/2 Joystick: Move. Button A: Action.
• New Rally-X™: Player 1/2 Joystick: Move. Button A: Action.
• Rolling Thunder™: Player 1/2 Joystick: Move. Button A: Jump / Blaster.
• Super Xevious™: Player 1/2 Joystick: Move. Button A: Zapper.

Included Games

This console features a selection of classic arcade titles:

• Atari Games: Centipede™, Millipede™, Asteroids™, Missile Command™, Crystal Castles™, Avalanche, Yars' Revenge™, Super Breakout™, Xari Arena, Gravitar™. (©2020 Atari Interactive, Inc.)
• Disney Games: Mickey Mouscapade™, Disney's DuckTales™, Adventures in the Magical Kingdom™, Chip 'n Dale Rescue Rangers™, Disney's Lilo & Stitch 2 - Hamsterviel Havoc™, The Jungle Book™, The Little Mermaid™, The Little Mermaid - Magic In Two Kingdoms™, Disney Princess - Royal Adventure™, Tim Burton's The Nightmare Before Christmas - The Pumpkin King™. (©2020 Disney)
• Bandai Namco Games: Pac-Man™ (©1980), Pac-Mania™ (©1987), Dig Dug™ (©1982), Dragon Spirit™ (©1987), Galaga™ (©1981), Galaga™ '88 (©1987), Mappy™ (©1983), New Rally-X™ (©1981), Rolling Thunder™ (©1986), Super Xevious™ (©1984). (All © BANDAI NAMCO Entertainment Inc.)

Other Titles Available: Visit Arcade1Up.com for product updates and a complete list of games.

Technical Specifications & Compliance

FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help.

Innovation, Science and Economic Development Canada (ISED) Statement: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation of the device.

Assistance or Service

If you have questions regarding your Arcade1Up product or require technical support, contact Arcade1Up Customer Service at www.Arcade1Up.com and click on "Support".