ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

Onforu LED Dusk to Dawn Wall Light

Quick Start Guide

This guide provides essential information for the installation and operation of your Onforu LED Dusk to Dawn Wall Light.

Models Covered: BDB55D-3, BDJ55D-3, BDI45D-2, BDC80D-3, BDD100D-3, BDL40D-3

Components and Structure

The following diagrams illustrate the different models and their components:

BDB55D-3
BDJ55D-3
BDI45D-2
BDC80D-3
BDD100D-3
BDL40D-3

Parts List

Ensure you have all the necessary parts before assembly:

A: Machine Screw (QTY: 3)
B: Expansion Rubber Plug (QTY: 3)
C: EVA Gasket (QTY: 1)
D: Mounting Bracket (QTY: 1)
E: Wire Nuts (QTY: 3)
F: Long Machine Screw (QTY: 1)
G: Silicone Gasket (QTY: 1)
H: Machine Screw (QTY: 2)
I: Machine Screw (QTY: 2)

Specifications

LED Wall Lamp Specifications

Model	BDB55D-3	BDJ55D-3	BDI45D-2	BDC80D-3	BDD100D-3	BDL40D-3
Input Current	0.5A	0.5A	0.38A	0.58A	0.83A	0.35A
Rated Power	55W	55W	45W	70W	100W	40W
Luminous Flux	5500lm	5500lm	4000lm	6200lm	9000lm	4000lm
Input Voltage	100-120V ~ 60Hz
CCT	6500K
CRI	≥80
Power Factor	≥0.9
L70B50 lifetime	30000hours L70B50 @ 25°
Beam Angle	120°
ta	-20-40°C/-4°F-104°F
Luminaire Location	SUITABLE FOR WET LOCATIONS

Dimensions

Model	BDB55D-3	BDJ55D-3	BDI45D-2
Dimensions (LxHxW)	272x123x121mm/ 10.71x4.84x4.76 in	270x152x109 mm/ 10.63x5.98x4.29 in	256x140x145 mm/ 10.08x5.5x5.7 in
Weight	0.9kg/1.98 lb	0.83kg/1.83 lb	0.9kg/1.98 lb
Max Projected Area	0.0214m²/0.23ft²	0.0214m²/0.23ft²	0.286m²/0.307ft²
Max. Lighting Coverage	90m²/968ft²	90m²/968ft²	70m²/753ft²

Model	BDC80D-3	BDD100D-3	BDL40D-3
Dimensions (LxHxW)	365x195x118 mm/ 14.4x7.67x4.64in	455x182x120 mm/ 17.9x7.16x4.72 in	279x136x118 mm/ 10.98x5.35x4.64 in
Weight	1.2 kg/2.64 lb	1.45 kg/3.2 lb	0.68 kg/1.5 lb
Max Projected Area	0.044m²/0.47ft²	0.049m²/0.52ft²	0.022m²/0.23ft²
Max. Lighting Coverage	115m²/1237ft²	160m²/1722ft²	60m²/645ft²

Note on Luminous Flux Testing: The testing standard for luminous flux involves placing the three/two lights on the same horizontal surface for testing. The tested luminous flux is the accurate luminous flux.

Component Identification:

Cover
LED Light Source
Lamp Bracket
Sensor head

Preparation

NOTE:

Before starting assembly, verify all parts are present against the parts list. Do not assemble if any part is missing or damaged.
Estimated Assembly Time: 30-60 minutes.
Recommended installation height: above 2.5m (8.2 ft) and no higher than 5 m (16.4 ft).
Product appearance may differ from the images shown.

Tools Required (not included):

Flathead screwdriver
Screwdriver
Silicone Sealant
Eye Protection
Pliers
Step Ladder

WARNING:

This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.

CAUTION:

Ensure your wall switch and power at the main circuit breaker are OFF before installation.
If you are unsure about electrical installation, consult a licensed electrician.

RISK OF SHOCK:

Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.

NOTE:

Use wire nuts/connectors rated for the correct gauge and number of wires used.
Ensure no exposed wire bundles are outside the wire nut/connector.
Be careful not to damage or cut the wire insulation during installation. Do not let wires touch sharp edges.

WARNING:

Do not connect this light fixture to an ungrounded electrical system. Attach the fixture's ground wire to either the green ground screw on the mounting plate or the ground wire in the outlet box.

Installing this light in an ungrounded electrical system may cause the metal parts of the light to carry current if any wires or wire connections are damaged or loose. In such cases, anyone touching the light could receive an electric shock, resulting in injury or death.

Installation Steps

Step 1: For wet locations, ensure the gap between the EVA gasket and the mounting surface is completely filled with sealing compound or silicone glue. Attach the mounting bracket (D) to the fixture using machine screws (H).
Step 2: Connect the wires:
- WHITE NEUTRAL LINE (FROM HOUSE) to WHITE NEUTRAL LINE (FROM FIXTURE) using a wire nut (E).
- BLACK LIVE WIRE (FROM HOUSE) to BLACK LIVE WIRE (FROM FIXTURE) using a wire nut (E).
- GREEN GROUND WIRE (FROM HOUSE) to GREEN GROUND WIRE (FROM FIXTURE) using a wire nut (E).
Step 3: Secure the light fixture using the long machine screw (F) and silicone gasket (G). Ensure the raised part (RA) of the metal plate engages with the recessed part (RE) of the base for proper installation.

Operation Instructions

Sensor Head:

When ambient brightness is less than 10-20 LUX at night, the light turns on automatically.
When ambient brightness is more than 30-60 LUX during the day, the light turns off automatically.

NOTE: Do not cover the sensor head, as this will affect the lamp's normal operation.

Troubleshooting

Malfunction	Cause	Remedy
LED senses a movement, the light does not light up	1. The light is not energized. 2. Other surrounding light sources make the light misjudge it as daytime.	1. Check power-on status. 2. Turn off nearby lights or adjust the sensor head to face other directions.
LED sensor light illuminates during the day	The shadows around the sensor make it mistakenly think it's night.	Do not cover the sensor head.
LED sensor light flashing	1. Surrounded by other unstable light sources shining onto the induction. 2. The light from the lamp itself is reflected on the sensor.	1. Avoid exposure to such light sources. 2. Follow instructions in "LED DUSK TO DAWN WALL LIGHT – Matters Needing Attention" to readjust the light sensor.

Manufacturer Information

Manufacturer / Hersteller: Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si
Address: qian wan yi lu 1 hao A dong 201 shi qian hai shen gang he zuo qu Shen Zhen, Guang Dong, 518000, CN
Contact: support@onforuled.com | www.onforuleds.com

EU REP: MDH LIGHTING LTD
Address: Suite 302, 292 Strovolos Avenue, 2048 Strovolos Nicosia, Cyprus
Contact: support@onforuled.com

UK REP: MDH LIGHTING LTD
Address: 69 Aberdeen Avenue, Cambridge CB2 8DL, United Kingdom
Contact: support@onforuled.com

Made in China

Models: BDB55D-3, BDJ55D-3, BDL40D-3, BDI45D-2, BDC80D-3, BDD100D-3, BDB55D-3, LED Dusk to Dawn Wall Light, BDB55D-3 LED Dusk to Dawn Wall Light

File Info : application/pdf, 10 Pages, 4.65MB

BDB55D-3 BDJ55D-3 BDC80D-3 BDD100D-3 ?v=1653965798

References

Onforu LED Light - Colorful LED Lights Make Your Life More Colorful

Adobe PDF library 15.00 Adobe Illustrator(R) 24.0

Related Documents

	Onforu LED Wall Lamp Product Manual - Specifications, Components, and Installation Guide Comprehensive product manual for Onforu LED Wall Lamps, detailing specifications, components, parts list, dimensions, preparation, and installation steps for various models including BDB60-3, BDC80-3, and BDB100-3. Includes safety warnings and manufacturer information.
	ONFORU PIR LED Wall Lights with Motion Sensor - BDB55G-3, BDB100G-3 Detailed specifications, parts list, installation guide, and troubleshooting for ONFORU PIR LED Wall Lights with Motion Sensor, models BDB55G-3 and BDB100G-3. Features include motion sensing, adjustable settings, and wet location suitability.
	Onforu BDB55SX-3 Smart Wireless Floodlight Camera User Manual Comprehensive user manual for the Onforu BDB55SX-3 Smart Wireless Floodlight Camera, covering installation, setup, app operation, specifications, and troubleshooting.
	FCC Test Report: Onforu LED Smart Floodlight (BDB100WF-3) Official FCC test report for the Onforu LED Smart Floodlight, Model BDB100WF-3, detailing compliance with FCC Part 15 regulations. Includes test results for radiated emissions, conducted emissions, power spectral density, and more.
	Onforu Smart Floodlight Camera BDB55SX-3 Installation and User Manual Comprehensive guide for installing and using the Onforu Smart Floodlight Camera Model BDB55SX-3. Includes safety information, parts list, specifications, installation steps, and troubleshooting.
	Onforu LED Dusk to Dawn Barn Light GCA60D-1 Product Manual Comprehensive product manual for the Onforu GCA60D-1 LED Dusk to Dawn Barn Light, detailing specifications, components, operation modes, remote control functions, preparation, installation steps, wiring, and safety guidelines.
	Onforu Smart Wireless Floodlight Camera BDB55SX-3 User Manual Comprehensive user manual for the Onforu Smart Wireless Floodlight Camera, model BDB55SX-3. Includes installation instructions, specifications, safety information, app operation, and troubleshooting.
	Onforu BDB65SX-3 Smart Wireless Floodlight Camera User Manual and Installation Guide Comprehensive user manual for the Onforu BDB65SX-3 Smart Wireless Floodlight Camera. Includes installation instructions, app setup, features, specifications, and troubleshooting for this 4MP Wi-Fi security camera with LED floodlight.