Cheese Display Case

Safety Precautions

⚠️ DANGER: Machine must be properly grounded to prevent electrical shock to personnel. Failure to do so could result in serious injury, or death. Ensure all machine switches are in the OFF position before plugging the equipment into the receptacle. Keep cord and plug off the ground and away from moisture. Always unplug the equipment before cleaning or servicing. DO NOT immerse any part of this equipment in water. DO NOT use a water jet or excessive water when cleaning.

⚠️ DANGER: Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Any alterations to this equipment will void the warranty and may cause a dangerous condition. This appliance is not intended to be operated by means of an external timer or separate remote-control system. NEVER make alterations to this equipment. Read the Installation, Operating, and Maintenance Instructions thoroughly before installing, servicing, or operating this equipment.

⚠️ WARNING: To avoid burns, DO NOT touch heated surfaces. DO NOT place or leave objects in contact with heated surfaces.

⚠️ WARNING: ALWAYS wear safety glasses when servicing this equipment. ?

⚠️ WARNING: No user serviceable parts inside. Refer servicing to qualified service personnel.

⚠️ WARNING: Read and understand operator’s manual and all other safety instructions before using this equipment. To order copies of the operator’s manual go to gmpopcorn.com or write to Gold Medal Products Co., 10700 Medallion Drive, Cincinnati, OH 45241 USA 1-(800)-543-0862.

⚠️ WARNING: DO NOT allow direct contact of this equipment by the public when used in food service locations. Only personnel trained and experienced in the equipment operation may operate this equipment. Carefully read all instructions before operation.

⚠️ WARNING: This machine is NOT to be operated by minors.

⚠️ CAUTION: If the supply cord is damaged, it must be replaced by Gold Medal Products Co., its service agent or similarly qualified persons in order to avoid a hazard.

Note: Improvements are always being made to Gold Medal’s equipment. This information may not be the latest available. Contact Gold Medal’s Technical Service Department at 1-800-543-0862 for questions about operations, replacement parts, or service. Gold Medal Products Co. does not assume liability for injury due to careless handling or operation. General images may be used for reference only.

Installation Instructions

Inspection of Shipment

Unpack all cartons and check thoroughly for any damage that may have occurred during transit. Damage claims should be filed immediately with the transportation company. Gold Medal Products is not responsible for damage that occurs in transit.

Model Description

This unit is designed for Portion Pak Cheese Containers. It is not intended for the storage or display of time/temperature control for safety foods.

Setup

Your new Cheese Display Case is assembled and tested at the factory. Remove all packing material and tape before starting operation.

Electrical Requirements

The following power supply must be provided (reference unit Data Plate for Wattage requirement): 120V~, 60 Hz.

⚠️ DANGER: Machine must be properly grounded to prevent electrical shock to personnel. Failure to do so could result in serious injury, or death. Ensure all machine switches are in the OFF position before plugging the equipment into the receptacle. Keep cord and plug off the ground and away from moisture. Always unplug the equipment before cleaning or servicing. DO NOT immerse any part of this equipment in water. DO NOT use a water jet or excessive water when cleaning.

A certified electrician is required for power supply and receptacle installation. A dedicated and protected circuit is recommended. Improper wiring voids warranty. Plug directly into a wall outlet; extension cords are not recommended. Ensure cord placement prevents trip hazards.

Before You Plug In Machine

1. Ensure all machine switches are OFF before plugging equipment into receptacle.
2. Ensure wall outlet accepts grounded plugs.
3. Verify wall outlet polarity; consult an electrician if unsure.
4. DO NOT use a grounded to un-grounded receptacle adapter.
5. Install unit in a level position.

⚠️ CAUTION: If the supply cord is damaged, it must be replaced by Gold Medal Products Co., its service agent or similarly qualified persons in order to avoid a hazard.

Operating Instructions

Controls and Their Functions

The lighted rocker switch controls the element, blower fan, and light bulbs. The fan circulates air over the thermostat-controlled element, keeping the cheese portion packs warm inside the cabinet.

Care and Cleaning

⚠️ DANGER: Machine must be properly grounded. DO NOT immerse in water. DO NOT clean with a water jet or steam cleaner. Always unplug before cleaning or servicing.

⚠️ WARNING: To avoid burns, DO NOT touch heated surfaces. DO NOT place or leave objects in contact with heated surfaces. ?

Sanitation: Use non-toxic, food-grade cleaners. A clean machine is good advertising.

1. Turn machine OFF, unplug, and allow to cool before cleaning.
2. Clean all pans/accessories (racks) to sanitize before each use.
3. Clean the outside with a soft cloth dampened with soap and hot water.
4. Wipe stainless steel parts with a clean cloth and stainless steel cleaner (e.g., Gold Medal Watchdog Stainless Cleaner, Item No. 2088). Do not use oven cleaners or abrasive materials.
5. Clean glass panels with glass cleaner (e.g., Gold Medal Watchdog Glass Cleaner, Item No. 2588). Ammonia cleaners damage plastic doors/panels.

Maintenance Instructions (For Qualified Service Personnel Only)

⚠️ DANGER: Machine must be properly grounded to prevent electrical shock to personnel. Failure to do so could result in serious injury, or death. Ensure all machine switches are in the OFF position before plugging the equipment into the receptacle. Keep cord and plug off the ground and away from moisture. Always unplug the equipment before cleaning or servicing. DO NOT immerse any part of this equipment in water. DO NOT use a water jet or excessive water when cleaning.

⚠️ DANGER: Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Any alterations to this equipment will void the warranty and may cause a dangerous condition. This appliance is not intended to be operated by means of an external timer or separate remote-control system. NEVER make alterations to this equipment. Read the Installation, Operating, and Maintenance Instructions thoroughly before installing, servicing, or operating this equipment.

⚠️ WARNING: No user serviceable parts inside. Refer servicing to qualified service personnel.

⚠️ CAUTION: These sections are intended only for qualified service personnel familiar with electrical equipment, not for the operator.

Ordering Spare Parts

1. Identify needed part by checking photos, illustrations, or parts list.
2. Use only approved replacement parts.
3. When ordering, include part number, part name, and quantity.
4. Include model number, serial number, and date of manufacture.
5. Address orders to: Parts Department, Gold Medal Products Co., 10700 Medallion Drive, Cincinnati, Ohio 45241-4807.

Contact Information

Phone: (800) 543-0862, (513) 769-7676

Fax: (800) 542-1496, (513) 769-8500

E-mail: info@gmpopcorn.com

Web Page: gmpopcorn.com

Cabinet Assembly 5583

This section presents an exploded view diagram of the cabinet assembly for Model 5583. It illustrates the arrangement of various components, including the main cabinet body, bottom plate, heat element, exhaust blower, thermostat, light bulb sockets, and acrylic panels, with numbered indicators corresponding to the parts list.

Parts List - Cabinet Assembly

Electrical Schematic – 5582 & 5583

This section provides an electrical schematic for models 5582 & 5583. It details the wiring connections, showing the path from the lead-in cord (PN 22038) through the switch (PN 40324) to the heater element (PN 38534), thermostat (PN 38533), exhaust blower (PN 48018), and light bulbs (PN 47422) via sockets (PN 75040). It specifies wire gauge (16 AWG) and temperature ratings for connections.

Warranty

Gold Medal Products Co. warrants its manufactured items against defects in workmanship and material for normal use. The warranty covers repair or replacement of defective parts, freight prepaid, to their Cincinnati, Ohio factory.

Warranty Period: Two (2) years for parts, six (6) months for labor from the original sale date, provided operating and maintenance procedures are followed.

Limitations: This warranty is exclusive and in lieu of all others. Gold Medal is not liable for special, incidental, or consequential damages. Claims are void if the equipment is misused, neglected, damaged in transit, tampered with, or if non-approved parts are used. Warranty is effective only when electrical items are properly attached to utility lines at correct voltages. Warranty is not transferable without written consent.

Original Purchaser: Defined as the person, firm, association, or corporation billed by Gold Medal Products Co. or its authorized distributor.

Warranty Void Condition: Warranty is void unless the original purchaser first calls Gold Medal Products Co. at 1-800-543-0862 to discuss the problem and obtain instructions for repair or replacement.

Note: This equipment is manufactured and sold for commercial use only.

© 2022 Gold Medal Products Co. All rights reserved.