FSP1300-20FH 1300W CRPS Module
Technical Datasheet
Product Overview
The FSP1300-20FH is a redundant power supply module based on the CRPS 2.0 standard. It offers a total power capacity of up to 1300 Watts and features PMBus capabilities for communication with the motherboard. This power supply is an ideal choice for new generation datacenter applications and complies with the latest safety and EMC standards, meeting various worldwide regulations.
Key Features
- Certified CB 62368-1 & CB 60950-1
- HVDC Input
- Meets 80 Plus Platinum efficiency standards
- Meets CRPS 2.0 standards
- Meets PMBus 1.2 standards
- Designed for 5,000 meters above sea level
- High Reliability
- Low Ripple & Noise
- Over Current Protection
- Over Temperature Protection
- Over Voltage Protection
Safety Standard Approvals
The product is approved by various safety standards, including:
- CULUS LISTED I.T.E. POWER SUPPLY (E190414)
- TÜVRheinland ZERTIFIZIERT
- CE
- FCC
- (Other logos indicate compliance with specific regional or international standards)
General Specifications
| Dimension (L x W x H) | 185 x 73.5 x 39 (mm) / 7.28 x 2.89 x 1.53 (inch) |
| Efficiency | 80 Plus Platinum |
| Hold-up time at 100% Loading | 12V = 11ms, 12Vsb = 70ms |
| Operating altitude | 5,000 meters above sea level |
| Environment - Working temperature | 0°C to 55°C |
| Environment - Storage temperature | -20°C to +80°C |
| Environment - Working humidity | 5% to 90% RH non-condensing |
| Environment - Storage humidity | 5% to 95% RH non-condensing |
| MTBF (SR-332 Issue 2) | 250,000 hours of continuous operation at 45°C, 75% output load |
| Applications | Storage System, Workstation, Industry Controller |
Input Specifications
| HVDC input: Min. Voltage | 180Vdc |
| HVDC input: Rated Voltage | 336Vdc |
| HVDC input: Max. Voltage | 400Vdc |
| HVDC input: Start up Voltage | 175V ±4Vdc |
| HVDC input: Power off Voltage | 165Vdc ±5Vdc |
| Accept AC input | 90-264Vac, 47-63Hz |
Output Rating
| Outputs | Input Voltage | Current | Peak Current Duration | |||
|---|---|---|---|---|---|---|
| Min. Current | Max. Current | CLST Peak 20 Sec. duration | CLST Peak 10m Sec. duration | Pmax Peak 100μ Sec. duration | ||
| +12V | 90~120V | 0.5A | 105.3A | Rated +6.0A | Rated +30.0A | Rated +45.0A |
| +12V | 180~264V | 0.5A | 80.5A | Rated +6.0A | Rated +30.0A | Rated +45.0A |
| +12Vsb | 90~264V | 0.0A | 3.0A | >4.0A | NA | NA |
Note:
- For 100Vac to 127Vac input, the rating current is 80.5A.
- For 180Vac to 264Vac input, the rating current is 105.3A.
Mechanical Specifications
The FSP1300-20FH power supply module is designed with specific dimensions for integration into various systems. The overall form factor is a compact module.
Key Dimensions (Unit: mm):
- Length: 185.0 ± 0.5 mm
- Width: 73.5 ± 0.5 mm
- Height: 39.0 ± 0.3 mm
Detailed diagrams show the placement of connectors, mounting points, and indicate airflow direction. Specific dimensions for connector interfaces and mounting holes are provided in the original documentation for precise integration.
The module features a fan for thermal management, typically located at one end for intake or exhaust.
