BISSELL MultiClean™ Wet + Dry Drum Vacuum

Getting Started

This manual provides instructions for your BISSELL MultiClean™ Wet + Dry Drum Vacuum. Key stages include:

• ? Unpacking the unit.
• ➡️ Assembly of components.
• ⏻ Operation of the vacuum.
• ? Cleaning and maintenance.

Please refer to the following sections for detailed steps.

Assembly Instructions

Follow these steps to assemble your vacuum cleaner:

1. Connect the hose to the vacuum drum.
2. Attach the extension wand sections together.
3. Connect the floor nozzle to the extension wand.
4. Connect the hose to the extension wand.
5. Attach the floor nozzle to the extension wand.
6. Connect the hose to the vacuum drum.

Operating Your Vacuum

To operate the vacuum, follow these steps:

1. Attach the floor nozzle to the extension wand.
2. Connect the hose to the vacuum drum.
3. Plug the power cord into a wall outlet. ?
4. Insert the foam filter into the designated compartment.
5. Connect the hose to the vacuum drum.
6. Attach the floor nozzle to the vacuum.
7. Attach the floor nozzle to the vacuum.
8. Connect the hose to the vacuum drum.
9. Plug the power cord into a wall outlet. ?
10. Use the floor nozzle for dry vacuuming.
11. Use the floor nozzle for wet vacuuming.
12. Do not use the wet nozzle for dry debris. ?
13. Use the crevice tool for tight spaces.
14. Use the upholstery tool for fabric surfaces.

Maintenance and Cleaning

Regular maintenance ensures optimal performance. Follow these steps:

1. Plug the power cord into a wall outlet. ?
2. Connect the hose to the vacuum drum.
3. Attach the hose to the vacuum drum.
4. Remove and clean the foam filter.
5. Remove and clean the foam filter.
6. Remove and clean the foam filter.
7. Remove and clean the foam filter.
8. Connect the hose to the vacuum drum.
9. Connect the hose to the vacuum drum.
10. Insert the clean foam filter.
11. Connect the hose to the vacuum drum.
12. Remove the top lid of the vacuum drum.
13. Remove the top lid of the vacuum drum.
14. Remove the top lid of the vacuum drum.
15. Connect the hose to a water source for rinsing.
16. Allow the filter to dry for 24 hours. ⏳
17. Connect the hose to the vacuum drum.
18. Connect the hose to the vacuum drum.
19. Insert the clean filter.
20. Insert the clean filter.
21. Final assembled view of the vacuum.