TTI Consumer Power Tools Recalls RIDGID Framing Nailers Due to Laceration Hazard

Release Date: July 31, 2025

Release Number: 25-Cleared

Recall Summary

Name of Product: RIDGID 18Volt Brushless 21-Degree Framing Nailers and RIDGID 18Volt Brushless 30-Degree Framing Nailers

Hazard: The dual action engagement system on the nailers can malfunction and involuntarily discharge a nail by pulling the trigger alone, posing a laceration hazard to consumers. The nailer should require both the work piece contact element (nose-piece) to be depressed and the trigger to be pulled at the same time in order to discharge a nail.

Remedy: Repair

Consumers should immediately stop using the recalled nailers and visit powertools.ridgid.com/recall to determine if their nailer is included in the recall and for instructions on how to obtain a free repair. TTI Consumer Power Tools will send a prepaid label to the consumer to return the recalled nailer, the software in the nailer will be updated, and then the nailer will be shipped back to the consumer.

Consumer Contact: TTI Consumer Power Tools toll-free at 800-597-9624 from 9 a.m. to 5 p.m. ET Monday through Friday, online at powertools.ridgid.com/recall or powertools.ridgid.com and click on "Important Recall Information" at the bottom of the page for more information.

Recall Details

Units: About 6,400 (In addition, about 6,575 were sold in Canada)

Description: This recall involves the RIDGID 18Volt Brushless 21-Degree Framing Nailer and the RIDGID 18Volt Brushless 30-Degree Framing Nailer. The model and serial numbers are located on the data plate found either on the side of the nail tray/magazine where the fasteners are loaded or on the bottom of the nailer where you insert the battery. Only nailers without either a black ink mark or a punched hole next to the serial number on the data plate are included in the recall.

Model Number / Name Serial Number Range
R09894 - 18Volt Brushless 21-Degree Framing Nailer CS21146D220001 - CS24165N220001
R09895 - 18Volt Brushless 30-Degree Framing Nailer CS21275D220001 - CS24165N220001

Incidents/Injuries: None reported

Sold at: Home Depot and Direct Tools Factory Outlet stores nationwide and online at www.homedepot.com and www.directtoolsoutlet.com from July 2021 through May 2025 for between $329 and $389.

Importer: TTI Consumer Power Tools, Inc., of Anderson, South Carolina

Manufactured in: China

Notes: Health Canada's Press release is available at: TBD

A description of the recalled RIDGID 18Volt Brushless 21-Degree Framing Nailer shows an orange and black power tool with a nail magazine extending from the front. The RIDGID logo is visible on the side.

A description of the recalled RIDGID 18Volt Brushless 30-Degree Framing Nailer shows an orange and black power tool with a nail magazine extending from the front. The RIDGID logo is visible on the side.

Fast Track Recall

Note: Individual Commissioners may have statements related to this topic. Please visit http://www.cpsc.gov/commissioners to search for statements related to this or other topics.

About the U.S. CPSC

The U.S. Consumer Product Safety Commission (CPSC) is charged with protecting the public from unreasonable risk of injury associated with the use of thousands of types of consumer products. Deaths, injuries, and property damage from consumer product-related incidents cost the nation more than $1 trillion annually. Since the CPSC was established more than 50 years ago, it has worked to ensure the safety of consumer products, which has contributed to a decline in injuries associated with these products.

Federal law prohibits any person from selling products subject to a Commission ordered recall or a voluntary recall undertaken in consultation with the CPSC.

For lifesaving information:

PDF preview unavailable. Download the PDF instead.

RIDGID NAILER PRESS RELEASE ?v=1753964339 Adobe PDF Library 25.1.97

Related Documents

Preview RIDGID Framing Nailer Recall: Laceration Hazard - Models R09894 & R09895
Recall notice from U.S. CPSC and Health Canada for RIDGID 18Volt Brushless Framing Nailers (Models R09894 and R09895) due to a laceration hazard caused by involuntary nail discharge. Learn about the hazard, remedy, and how to get a free repair.
Preview RIDGID 18V Brushless Framing Nailer Safety Recall Notice
Important safety recall notice for RIDGID 18V Brushless 21-Degree and 30-Degree Framing Nailers due to a laceration hazard. Learn how to identify affected models and obtain a free repair.
Preview RIDGID 18V Brushless Framing Nailer Recall Notice
Important product recall for RIDGID 18V Brushless Framing Nailers (21 and 30 degree models) due to a laceration risk. Learn how to identify affected models and get a free repair.
Preview RIDGID 18V Brushless Framing Nailer: How-To Guides for Maintenance and Accessories
Comprehensive guides for RIDGID 18V Brushless Framing Nailers, covering air pressure tank refills, clearing nail jams, and installing extended capacity magazines, complete with video tutorials and required tools.
Preview RIDGID R4518/R4518T Table Saw Parts List and Repair Information
Comprehensive parts list and detailed diagrams for the RIDGID R4518/R4518T Table Saw, including component identification, part numbers, and a wiring diagram.
Preview RIDGID R4041/R4041S Tile Saw Repair Sheet and Parts List
Comprehensive repair sheet and parts list for the RIDGID R4041/R4041S Tile Saw. Includes detailed diagrams and part numbers for all components, facilitating identification, maintenance, and repair. Features English descriptions for all parts.
Preview RIDGID 18V Subcompact Impact Wrench Operator's Manual | R872071 R872081
Official operator's manual for RIDGID 18V Subcompact 3/8 in. and 1/2 in. Impact Wrenches (R872071, R872081). Includes safety warnings, operating instructions, maintenance, features, and specifications.
Preview RIDGID R86116 18V Hammer Drill Repair Sheet and Parts List
This document provides a repair sheet, parts list, and wiring diagram for the RIDGID R86116 18V Hammer Drill. It includes detailed part numbers, descriptions in English, French, and Spanish, and a visual representation of the drill's components and wiring.