Action Camera Accessories Quick Start Guide
Model: GA100
Included Accessories
- C1: J-hook Buckle
- C2: Water-proof Case Mount
- D1: 180° Rotating Mount
- D2+D3: 360° Rotating Mount
- E1: Bicycle Handlebar Mount
- F1: Helmet Mount with Screw
- F2: Helmet Mount
- G: Camera Mount Frame
- H: Dust-proof Cover
- Hand/Helmet Strap
- Anti-lost Insurance Strap
- K: Reinforced Strap
Assembly Instructions
Note: Diagrams below illustrate the combination of parts.
Configuration 1: A1+B2+E1
Combines parts A1, B2, and E1 to form a specific mounting setup.
Configuration 2: A2+C2+F1+1
Combines parts A2, C2, F1, and an additional part (indicated by '1') for a mounting configuration.
Configuration 3: A1+E1
Combines parts A1 and E1.
Configuration 4: A2+D1
Combines parts A2 and D1.
Configuration 5: A2+D1+D2+D3
Combines parts A2, D1, D2, and D3.
Configuration 6: A2+C1
Combines parts A2 and C1.
Configuration 7: A2+C2+J
Combines parts A2, C2, and J.
Product Information
Brand: WOLFANG
Model: GA100
Type: Quick Guide
Version: V2.0.0
Dimensions: 100x140mm (Folded)
Printing Color: Single Black
Material: 120g Double Gum Paper
Special Craft: Cutting, Creasing, Slotting, Half-cut, Gluing
Important Notes
This Quick Start Guide is primarily designed for the WOLFANG Action Camera GA100.
Support Team: support@wolfang.co
Disclaimer: This design drawing is the intellectual property of the company. Unauthorized reproduction is prohibited. This drawing should be used in conjunction with product specifications, product status, and product structural design drawings. Please report any discrepancies immediately to the designer. All dimensions in this drawing are 1:1 scale. Dimensions are subject to a tolerance of +/- 1mm for length and width, and +/- 1mm for height.
Recycling Information
This device, its accessories, batteries, and cords are recyclable. Please follow local recycling guidelines. [♻️ Recycle Symbol]
Made in China. Version 3.0.
