Kogan Automatic Soap Dispenser

Safety & Warnings

• Read all safety notes and instructions before first use, even if familiar with the product. Retain this user guide for future reference.
• Use the product only as described in this user guide.
• Fully charge the product before using it for the first time.
• To avoid damage to the product, do not use this product with non-foaming liquid soap.
• Do not rinse or immerse this product in water. Instead, clean with a damp cloth.
• Place this product in a cool place, away from direct sunlight and sources of heat.
• If this product is not being used for an extended period, charge it at least once every 3 months.

Overview

The Kogan Automatic Soap Dispenser (Model: NBAUTOSPDSA) is designed for convenient and hygienic soap dispensing. The dispenser features a curved top with a dispensing nozzle and an integrated sensor. Below the sensor is the soap reservoir, which allows monitoring of the soap level. A control button is located on the top, and an indicator light provides status updates. For wall mounting, a bracket is included, and a USB-C charging port is located on the rear of the unit.

Indicator Light Status

Assembly

1. Add foaming soap liquid into the reservoir. If using regular liquid soap, dilute it with water at a ratio of 1:6-10 before adding it to the reservoir.
2. Attach the top of the dispenser to the reservoir and rotate in a clockwise direction to secure it in place. Carefully shake the dispenser to check for leaks.
3. Remove the adhesive backing from the bracket and attach it to the wall in the desired location.
4. Attach the dispenser unit to the mounted bracket.

Operation

Charging

1. Connect the supplied charging cable to a USB power adapter and plug it into an electrical outlet.
2. Connect the other end of the charging cable to the USB-C charging port on the rear of the dispenser.

• The dispenser requires approximately 3.5 hours to reach a full charge.
• The battery provides 2-3 months of standby life or approximately 1 month with frequent usage.

Turning the Dispenser On/Off

Press and hold the button for 2 seconds to turn the dispenser on or off.

Dispensing Soap

1. Place your hands under the sensor area. The unit will automatically dispense soap.
2. The dispenser offers 3 levels of soap dispensing: low, medium, and high. Press the button to cycle through these levels.
3. The indicator light will display the currently selected level.

Dispensing Levels Visual: Low (two short bars), Medium (two medium bars), High (two tall bars).

Automatic Cleaning

1. Replace the soap in the reservoir with water. Then, press and hold the button for 10 seconds to activate the automatic cleaning cycle. This process lasts approximately 60 seconds, indicated by the light flashing alternately between blue and green.
2. Press the button again to end the automatic cleaning cycle.

Notes

This section is provided for users to record personal notes related to the product's use or maintenance.

Need more information?

We hope this user guide has provided the necessary assistance for a simple set-up.

For the most up-to-date guide for your product, or for any additional assistance you may require, please visit help.Kogan.com.

Kogan.com