Xiaomi Electric Kettle 2 User Manual
Your guide to safe operation, maintenance, and troubleshooting.
Precautions
- This product is for household use only.
- Intended for use in household and similar applications such as staff kitchen areas, farm houses, hotels, motels, bed and breakfast environments.
- The appliance must not be immersed in water.
- Only use with the provided base.
- Do not allow persons with reduced physical, sensory, or mental capabilities, or lack of experience or common sense, to use this product without supervision or guidance.
- Never let children play with the kettle. Keep it away from children.
- Unplug the kettle when it is empty, not in use, being moved, cleaned, or if there is a problem.
- Do not use on an inclined or unstable surface. Keep away from heat sources to avoid damage to plastic parts. Do not place adjacent to or on top of any electrical appliance.
- Use only with a grounded power outlet with a rated current of 10 A or above, and a rated voltage of 110 V~. Do not plug into a power outlet with other electrical appliances.
- If the power cord is damaged or broken, it must be replaced by the manufacturer or after-sales service department.
- Do not open the lid, pour water, or add water while the kettle is operating.
- Overfilling may cause boiling water to splash out.
- This kettle is for boiling water only. Do not use it to heat other substances (seaweed, eggs, soy milk, tea leaves, milk, noodles).
- Do not add water above the maximum water level mark to prevent overflow.
- Ensure water is above the minimum water level mark when boiling to prevent boil-dry.
- Remove the kettle from the base when adding water and wipe away excess water from the bottom before placing it back.
- Do not place near heat sources like cookers and stoves to avoid fire risk.
- Do not use low-quality power strips.
- Do not immerse the kettle in water. Do not tilt, shake, move, or tip the kettle when using it.
- Note: For first-time use, boil and empty the kettle 3 times before drinking.
- Caution: Ensure the kettle is turned off before moving it from the base.
- Warning: Do not move the lid while the water is boiling.
- Warning: Avoid spilling liquid onto the connector.
- Warning: Be cautious of burns from residual heat on the heating element after use.
Product Overview
The Xiaomi Electric Kettle 2 consists of the following parts:
- Spout: Designed for easy pouring of water.
- Kettle Body: The main container for water.
- Lid: Covers the top of the kettle.
- Lid Release Button: Allows for opening the lid.
- Handle: Provides a grip for lifting and carrying the kettle.
- On/Off Button: Activates or deactivates the heating function.
- Heating Indicator: A light that shows when the kettle is heating.
- Base: The power supply unit that the kettle sits on.
- Power Plug: Connects the base to an electrical outlet.
Note: Illustrations are for reference only. Actual product may vary due to enhancements.
How to Use
Press the lid release button to open the lid and add water to the kettle. Warning: The water level must reach at least the minimum mark and must not exceed the maximum mark.
[Diagram: Kettle with lid open, showing water level marks inside.]
Fully close the lid, and place the kettle onto the base.
[Diagram: Kettle being placed onto its power base.]
Press the on/off button. The heating indicator turns on, and the kettle starts heating.
[Diagram: Hand pressing the on/off button on the kettle.]
Once the water is boiling, the heating indicator will turn off, and the heating stops automatically.
[Diagram: Kettle boiling with steam rising, indicator light is off.]
Warning: Do not move the lid while the kettle is working to avoid getting scalded.
Cleaning & Maintenance
- Add 0.5 L of food-grade white vinegar and let it soak for at least 1 hour.
- After pouring out the vinegar, wipe away any remaining sediment with a damp cloth.
- Add water (above the minimum mark and below the maximum mark), boil it, pour out the hot water, and then rinse the kettle with clean water 4-5 times.
- Use a dry cloth to clean the outside of the kettle. Keep the kettle in a dry, well-ventilated area, protected from dust, moisture, and insects.
Precautions:
- Ensure the kettle is unplugged and has cooled down before cleaning.
- Regularly remove limescale and sediment inside the kettle to prolong its service life.
- If limescale buildup is severe, repeat the above steps. Do not use steel wool or any chemical or abrasive cleaning agents.
- Do not immerse the kettle or the base in water; keep their exteriors dry.
Specifications
Name | Xiaomi Electric Kettle 2 |
---|---|
Model | MJDSH04YM |
Rated Voltage | 110 V~ |
Rated Frequency | 60 Hz |
Rated Power | 1000 W |
Capacity | 1.7 L |
Net Weight | 1.17 kg |
Item Dimensions | 227 × 158 × 262 mm |
Troubleshooting
Issue | Possible Causes | Solutions |
---|---|---|
Heating indicator does not light up. | Power outlet is damaged or has poor contact. Power plug is not properly plugged in. Power plug is deformed. Base is not genuine or not suitable for this kettle. | Replace power outlet. Plug in the power plug correctly. Contact after-sales service. Use the provided base. |
Boiled water overflows. | Maximum water level mark is exceeded. | Keep water within the required range. |
Color changes or limescale builds up inside the kettle. | Local water hardness is high. | Clean in time. |
Kettle does not heat. | On/off button is not pressed or is stuck. Internal terminal block cables are loose or damaged. Thermostat is malfunctioning. | Press the on/off button again. Contact after-sales service. Contact after-sales service. |
Water does not boil or does not stop boiling. | Thermostat is malfunctioning. Kettle lid is not properly closed. Too little water, below the minimum mark. | Contact after-sales service. Close the lid securely. Keep water amount within the required range. |
Circuit Diagram
The circuit diagram illustrates the electrical connections for the kettle. It includes the power input (AC 110V, 60 Hz), live (L), neutral (N), and earth (E) connections. Key components shown are the thermostat connector, boil-dry switches, steam switch, thermostat, heating element, resistor, and heating indicator. These components work together to control the heating process and safety features.
Warranty Notice
This warranty provides specific rights, and you may have additional rights under local laws. Xiaomi warrants the product against defects in materials and workmanship under normal use for a specified period.
Limited Product Warranty:
Xiaomi warrants the product against defects in materials and workmanship under normal use for the warranty period. Xiaomi does not guarantee uninterrupted or error-free operation and is not liable for damages from non-compliance with instructions.
Remedies:
If a defect is found, Xiaomi will repair, replace, or refund the product at its discretion.
Obtaining Warranty Service:
Contact Xiaomi or an authorized service center. Proof of purchase may be required.
Exclusions and Limitations:
The warranty does not cover damage from acts of nature, misuse, commercial use, unauthorized modifications, or use with non-Xiaomi products. It also excludes damage from improper voltage or service performed by unauthorized personnel.
Implied Warranties & Damage Limitation:
Implied warranties are limited in duration. Xiaomi is not liable for indirect, special, or consequential damages.
Xiaomi Contacts:
For customer support and warranty information, visit: https://www.mi.com/en/service/warranty/
Manufacturer Information
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Foshan Viomi Electrical Technology Co., Ltd.
Address: 2nd Floor, No. 1 Building And 4th Floor of No. 7 Building, North of Four Xinxi Street, Lunjiao, Shunde, Foshan, Guangdong, P. R. China
For further information: Visit www.mi.com
Production Date: See box
Made in: China
User Manual Version: V1.2
Restricted Substances Information
This section details the presence of restricted substances (Lead, Mercury, Cadmium, Hexavalent Chromium, Polybrominated biphenyls, Polybrominated diphenyl ethers) in the equipment's components. The table indicates whether these substances are present above or below the specified percentage limits, or if they are exempt.