Xiaomi Smart Kettle 2 Pro User Manual

Precautions

Read this user manual carefully before use, and retain it for future reference.

This appliance is intended for household and similar applications such as:

• Staff kitchen areas in shops, offices, and other working environments.
• Farm houses.
• Client use in hotels, motels, and other residential type environments.
• Bed and breakfast type environments.

Important Safety Information:

• The appliance must not be immersed in water.
• The appliance is only to be used with the provided base.
• Do not allow persons with reduced physical, sensory, or intellectual abilities, or lack of experience or common sense, to use this product without supervision or guidance.
• Never let children play with the kettle. Keep it away from children.
• Always unplug the kettle when it is empty, not in use, when adding water, moving, cleaning, or if there is a problem.
• Do not use on an inclined or unstable surface. Keep away from heat sources to avoid damage to plastic parts. Do not place adjacent to or on top of any electrical appliance.
• Use only with a grounded power outlet rated at 10 A or above, and a voltage of 220-240 V~. Do not plug into an outlet with other appliances.
• If the power cord is damaged or broken, it must be replaced by the manufacturer or after-sales service department to avoid hazards.
• Do not open the lid, pour water, or add water while the kettle is operating.
• Overfilling may cause boiling water to splash out.
• This kettle is for boiling water only. Do not use it to heat other substances like seaweed, eggs, soy milk, tea leaves, milk, or noodles, as it may malfunction.
• Do not add water above the maximum water level mark; hot water may overflow or spray out, causing leaks.
• Ensure water is above the minimum water level mark to prevent boil-dry.
• Remove the kettle from the base when adding water and wipe away any excess water from the bottom before placing it back.
• Do not place near heat sources like cookers and stoves to avoid fire risk.
• Do not use low-quality power strips.
• Do not immerse the kettle or base in water. Do not tilt, shake, move, or tip the kettle while in use.
• Children aged 8 years and above can use the appliance with supervision or instruction for safe use and understanding of hazards. Cleaning and maintenance by children is only permitted if they are older than 8 and supervised. Keep the appliance and cord out of reach of children under 8 years.
• Warning: Avoid spillage on the connector.
• The heating element surface is subject to residual heat after use.
• The product complies with UK PSTI regulations. The full text of the declaration of conformity is available at: http://www.mi.com/global/service/support/declaration.html

Product Overview

The product consists of the following parts:

• Spout: For pouring water.
• Kettle Body: The main container for water. It has markings for maximum (1.7 L) and minimum (0.5 L) water levels.
• Base: The power base for the kettle.
• Display: Shows temperature and status.
• Knob: Used to select temperature.
• Status Light: Indicates the operational status.
• Lid: Covers the kettle.
• Lid Release Button: Opens the lid.
• Handle: For holding and carrying the kettle.
• Connector: Connects the kettle to the power base.
• Power Plug: Connects the base to the electrical outlet.

Note: Illustrations are for reference only. Actual product may vary due to enhancements.

Control Area and How to Use

Once connected to power, the kettle is ready for use.

1. Select a Function

In standby mode, turn the knob to select a temperature. Pressing the 'Keep Warm' or 'Boil' button initiates heating or keeping warm. The display turns off after 2 minutes of inactivity but lights up when the kettle is lifted or a button is pressed.

The knob adjusts temperature by 1°C increments from 40°C to 90°C by default. The Mi Home/Xiaomi Home app offers six temperature levels: 45°C, 60°C, 70°C, 85°C, and two custom levels.

2. Automatic Keep Warm After Boiling

Turn the knob to the desired keep-warm temperature, then press the 'Boil' button. The display shows the real-time water temperature. After boiling, the kettle cools to the set temperature and enters keep-warm mode.

• Indicator turns red during heating, blue when the set temperature is reached.
• Default keep-warm duration is 24 hours, customizable from 1 to 24 hours via the Mi Home/Xiaomi Home app.
• Maximum displayed temperature after boiling is 99°C.

3. Heat Directly to Keep Warm Temperature

Turn the knob to the desired temperature, then press the 'Keep Warm' button. The display shows the real-time water temperature. Upon completion, the kettle enters keep-warm mode.

In standby mode, if the water temperature is between 40°C and 90°C, pressing 'Keep Warm' directly enters keep-warm mode at the current temperature.

4. Boil

Press the 'Boil' button to start heating. The display shows the real-time water temperature. After heating, the water cools naturally.

Note: Mode and status lights turn off when water cools. Display turns off below 45°C.

5. Cancel Heating

During heating, press either the 'Keep Warm' or 'Boil' button again to cancel.

6. Kettle Lift Memory

When keeping warm, lifting the kettle displays '--'. If replaced within 3 minutes, it continues keeping warm. If replaced after 3 minutes, it returns to standby mode.

Note: This function is enabled by default and can be disabled in the app.

7. DND (Do Not Disturb) Mode

Can be enabled in the Mi Home/Xiaomi Home app. When enabled, the status light turns off and notification sounds are muted.

8. Restore Factory Settings

In standby mode, press and hold the 'Boil' button for 7 seconds to restore factory settings.

Connect with Xiaomi Home App

This product works with the Xiaomi Home app for control.

Scan the QR code to download and install the app. If already installed, you will be directed to the setup page. Alternatively, search for "Xiaomi Home" in your app store.

Open the Xiaomi Home app, tap "+" in the upper right corner, and follow the prompts to add your device.

Note: App versions may vary; follow current app instructions.

Wi-Fi Connection

Connecting: In standby mode, press and hold both 'Keep Warm' and 'Boil' buttons for 7 seconds. A buzzer will sound, indicating Wi-Fi reset. The Wi-Fi indicator will blink. Connect via the Xiaomi Home app. The indicator stays on once connected.

Enable/Disable Wi-Fi: Wi-Fi is disabled by default on first power-on. In standby mode, press and hold the 'Keep Warm' button for 7 seconds to enable/disable Wi-Fi.

Wi-Fi Status:

• Waiting for connection: Wi-Fi indicator blinks slowly.
• Connecting: Wi-Fi indicator is on.
• Connected successfully: Wi-Fi indicator is on.

Cleaning & Maintenance

1. Add 0.5 L of food-grade white vinegar and soak for at least 1 hour.
2. After pouring out the vinegar, wipe away any remaining sediment with a damp cloth.
3. Add water (between minimum and maximum marks), boil, pour out, and rinse with clean water 4-5 times.
4. Use a dry cloth to clean the exterior. Keep the kettle in a dry, well-ventilated area, protected from dust, moisture, and insects.

Precautions:

• Ensure the kettle is unplugged and cooled before cleaning.
• Regularly remove limescale and sediment inside to extend service life.
• For heavy limescale, repeat the cleaning steps. Do not use steel wool or abrasive cleaning agents.
• Do not immerse the kettle or base in water; keep the exterior dry.

Troubleshooting

Specifications

WARRANTY NOTICE

This warranty gives you specific rights, and you may have other rights conveyed by the laws of your country, province, or state. In some regions, consumer law may impose a minimum warranty period. Xiaomi does not exclude, limit, or suspend other rights you may have, except as permitted by law.

1. Limited Product Warranty

Xiaomi warrants that the Products are free from defects in materials and workmanship under normal use and in accordance with the user manual, during the Warranty Period. Warranty duration and conditions are provided by local laws. For more information, refer to Xiaomi's official website: https://www.mi.com/global/support/warranty.

Xiaomi warrants to the original purchaser that its product will be free from defects in materials and workmanship under normal use during the specified period. Xiaomi does not guarantee uninterrupted or error-free operation and is not liable for damages arising from non-compliance with instructions.

2. Remedies

If a hardware defect is found and a valid claim is received within the Warranty Period, Xiaomi will, at its option, (1) repair the product at no charge, (2) replace the product, or (3) refund the product, excluding potential shipping costs.

3. How to Obtain Warranty Service

To obtain warranty service, deliver the Product in its original or similar packaging to the address specified by Xiaomi. Xiaomi may require proof of purchase or compliance with registration requirements.

4. Exclusions and Limitations

This Limited Warranty applies only to products manufactured by or for Xiaomi, identified by Xiaomi or Mi trademarks. It does not apply to:

• (a) Damage due to acts of nature (e.g., lightning, flood, fire).
• (b) Negligence.
• (c) Commercial use.
• (d) Alterations or modifications to any part of the product.
• (e) Damage caused by use with non-Xiaomi products.
• (f) Damage caused by accident, abuse, or misuse.
• (g) Damage caused by operating the product outside permitted uses or with improper voltage/power supply.
• (h) Damage caused by service performed by non-Xiaomi representatives.

You are responsible for backing up any data or materials stored on the product. Xiaomi is not responsible for data loss during service.

No Xiaomi reseller, agent, or employee is authorized to modify this warranty. If any term is held unenforceable, the rest remain valid.

After-sales services are limited to the country or region of original purchase, unless otherwise promised by Xiaomi or prohibited by law.

Products not duly imported, manufactured, or acquired from Xiaomi or an official seller are not covered. You may benefit from warranties from the retailer who sold the product. Xiaomi invites you to contact your retailer.

These warranties do not apply in Hong Kong and Taiwan.

5. Implied Warranties

Implied warranties (including merchantability and fitness for a particular purpose) are limited in duration to the maximum duration of this limited warranty, to the extent permitted by law. Some jurisdictions do not allow duration limitations.

6. Damage Limitation

Xiaomi shall not be liable for indirect, special, or consequential damages (including loss of profits, revenue, or data) resulting from any breach of warranty or condition, even if informed of the possibility of such damages, to the extent permitted by law. Some jurisdictions do not allow exclusion or limitation of such damages.

7. Xiaomi Contacts

For customer support, visit: https://www.mi.com/global/support/warranty. Contact persons for after-sales service include authorized service network personnel, distributors, or the final vendor.

Declarations and Information

EU Declaration of Conformity

Foshan Viomi Electrical Technology Co., Ltd. declares that this equipment complies with applicable EU Directives and Norms. Full text available at: http://www.mi.com/global/service/support/declaration.html. For detailed e-manual, visit: www.mi.com/global/support/user-guide.

UK Declaration of Conformity

Foshan Viomi Electrical Technology Co., Ltd. declares that this equipment complies with applicable UK Directives and Norms, and UK PSTI regulations. Full text available at: http://www.mi.com/global/service/support/declaration.html.

WEEE Information

Products with this symbol are waste electrical and electronic equipment (WEEE) and should not be mixed with unsorted household waste. Dispose of waste equipment at designated collection points to protect human health and the environment. Correct disposal and recycling help prevent negative consequences. Contact local authorities for more information on collection points.

Manufacturer Information

Manufactured for: Xiaomi Communications Co., Ltd.

Manufactured by: Foshan Viomi Electrical Technology Co., Ltd. (a Mi Ecosystem company)

Address: 13th Floor, No. 7, Industrial Road, Licun Village, Lunjiao Town, Shunde District, Foshan City, Guangdong Province, P.R. China.

For more information, visit www.mi.com.

Production Date: See box.

Made in China.

User Manual Version: V1.1

EU Representative

Xiaomi Technology Netherlands B.V.

Prinses Beatrixlaan 582, 2595BM, The Hague, The Netherlands

contact@support.mi.com

UK Representative

Xiaomi Technology UK Limited

Davidson House, Forbury Square, Reading, Berkshire RG1 3EU

contact@support.mi.com