FITUEYES FT65 Floor TV Stand

Product Model Numbers:

• S01N1444B / S02N1444B
• S01N1445A / S02N1445A
• S01N1446C / S02N1446C

What's in the Box:

Components:

• Part A (x4) - Screws
• Part B (x4) - Screws
• Part C (x8) - Screws
• Part D (x1) - Bracket Component
• Part E (x1) - Bracket Component
• Part F (x1) - Bracket Component
• Part G (x1) - Hardware Component

Accessories for Installing TV:

Hardware Kit:

• M-A (x4) - M8x45 Screws
• M-B (x4) - M8x20 Screws
• M-C (x4) - M8x30 Screws
• M-D (x4) - M6x14 Screws
• M-E (x4) - M6x30 Screws
• M-F (x4) - M8x30 Screws
• M-G (x4) - M8x50 Screws
• M-H (x4) - Washers (M8x30)
• M-I (x8) - 5mm Spacers/Washers
• M-J (x8) - 15mm Spacers/Washers

Assembly Instructions

Step 1: Attach Base Plate

Connect the base plate (Part 1) to the lower vertical support (Part 2) using four (4) Part A screws.

Step 2: Attach Side Supports

Secure the side supports (Part 3) to the base plate (Part 1) using four (4) Part B screws.

Step 3: Assemble Vertical Structure

Attach the main vertical pole (Part 5) to the base assembly. This step illustrates height adjustment options.

Step 4: Mount TV Bracket to Pole

Fasten the TV mounting bracket (Part 4) to the vertical pole (Part 5) using four (4) Part C screws. The document indicates that parts should be differentiated, with explanatory text provided in multiple languages including English, Chinese, Japanese, German, French, Italian, and Spanish.

Step 5: Attach TV to Bracket

Select appropriate screws from the M-A to M-G hardware kit to attach Part 4 (the TV bracket) to the four screw holes on the back of the TV. The installation method depends on the TV's back panel:

Method A1 (Flat TV Back): If the TV back is flat, use the installation method without gaskets (spacers).

Method A2 (Uneven TV Back): If the TV back is uneven, use the installation method with washers (M-H) and spacers (M-I, M-J). Thick washers can be superimposed as needed.

Step 6: Attach Support Arms

Connect the support arms (Part 6) to the TV bracket (Part 4) using the provided hardware (e.g., D x1, E x1, F x1, G x1).

Step 7: Connect Stand Structure

Attach the main stand structure (Part 7) to the TV bracket assembly.

Step 8: Final Stand Assembly

Complete the stand assembly by attaching the stand base (Part 8) to the main structure. This involves two sub-steps, labeled Step 1 and Step 2.

Step 9: Mount TV to Stand

Carefully lift the TV with the attached bracket and mount it onto the assembled stand structure.

Step 10: Final Check

Ensure all connections are secure and the TV stand is stable.