Dometic NRX0090V Refrigerator

Important Notices and Warnings

DANGER: Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

NOTICE: Indicates a situation which, if not avoided, could result in minor or moderate injury.

• Ensure proper ventilation to prevent shortened lifespan and reduced cooling performance.
• Observe minimum spacing requirements when installing the refrigerator to furniture.
• Avoid tilting the refrigerator more than 30°.
• Do not place the refrigerator in direct sunlight or near heat sources.
• Ensure the condensation drain is properly connected.
• Do not block air vents.
• Keep the refrigerator clean and free from obstructions.
• Do not use sharp objects to clean the interior.
• Do not place hot food inside the refrigerator.
• Ensure the power supply is correct for the refrigerator (12V or 24V).
• Disconnect power before performing any maintenance.

Dimensions

Refer to the diagrams for precise dimensions. Key measurements include:

• Height: 821 mm
• Width: 486 mm
• Depth: 480 mm

Minimum required clearances:

• Rear: 50 mm (2 in)
• Sides: 50 mm (2 in)
• Top: 50 mm (2 in)

Air Flow Requirements

Adequate air flow is crucial for optimal performance. Ensure the following minimum clearances:

• A (Rear): ≥ 50 mm (2 in)
• B (Top/Sides): ≥ 50 mm (2 in)

Insufficient air flow can lead to a shortened lifespan and reduced cooling performance.

Condensation Drain

The condensation drain system collects moisture from inside the refrigerator. Ensure the drain tube is properly routed and not kinked.

Absorber MDC90

The refrigerator utilizes an Absorber MDC90 system. Ensure it is installed and connected as per the diagrams.

Electrical Connections (DC)

The refrigerator can be powered by 12V or 24V DC. Ensure the correct voltage is supplied and that the wiring gauge is appropriate for the cable length to minimize voltage drop. Recommended cable cross-sections are provided in the diagrams for different lengths and currents (15A for 12V, 7.5A for 24V).

Fixing the Refrigerator

Follow the step-by-step instructions in the diagrams for securely fixing the refrigerator in place. This typically involves using the provided mounting brackets and screws.

Reversing the Door

Instructions are provided in the diagrams for reversing the refrigerator door to suit different installation configurations. This involves relocating the hinges and latch mechanism.