Dometic Refrigeration RUA Series Installation Manual

installation guide for DOMETIC models including: RUA5208X Absorption Refrigerator, RUA5208X, Absorption Refrigerator, Refrigerator

DOMETIC RUA6408X (03) - Google Drive

File Info : application/pdf, 32 Pages, 3.34MB

DOMETIC RUA6408X (03)

REFRIGERATION RUA SERIES
RUA5208X, RUA6408X, RUA8408X EN Absorption refrigerator
Installation Manual
https://manual-hub.com/

https://manual-hub.com/

RUA5208X, RUA6408X, RUA8408X

Explanation of symbols

Please read this instruction manual carefully before installation and first use, and store it in a safe place. If you pass on the product to another person, hand over this instruction manual along with it.

I NOTE You can find details on the operation in the operation manual.

Table of contents
1 Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 3 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 4 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 5 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 6 Installing the refrigerator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 7 Connecting the refrigerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

1 Explanation of symbols
! WARNING! Safety instruction: Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
! CAUTION! Safety instruction: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
A NOTICE! Indicates a situation that, if not avoided, can result in property damage.
I NOTE Supplementary information for operating the product.

https://manual-hub.com/

Safety instructions

RUA5208X, RUA6408X, RUA8408X

2 Safety instructions

The manufacturer accepts no liability for damage in the following cases: · Faulty assembly or connection · Damage to the product resulting from mechanical influences and incorrect
connection voltage · Alterations to the product without express permission from the manufacturer · Use for purposes other than those described in the operating manual

! WARNING! · Never open the absorber unit. It is under high pressure and can cause injury if it is opened.
· Ensure clean and residue-free handling if silicone sealant or similar is used. There is a risk of fire if silicone filaments come into contact with hot parts or naked flames.
· Do not operate the refrigerator if it is visibly damaged.
· If the AC power cable for this refrigerator is damaged, it must be replaced by the manufacturer, customer service or a similarly qualified person in order to prevent safety hazards.
· Never use a naked flame to check the refrigerator for leaks.
· This refrigerator may only be repaired by qualified personnel. Inadequate repairs may cause serious hazards.
· Only use universal LPG gas.
· Only operate the refrigerator at the pressure shown on the type plate. Only use pressure controllers with a fixed setting which comply with national regulations.
· Dismantle all refrigerator doors for the disposal of the old refrigerator and leave the shelves in the refrigerator to prevent accidental enclosure and suffocation.
! CAUTION! · Danger of crushing! Do not put your fingers into the hinge.
· Before starting the device, ensure that the power supply line and the plug are dry.

https://manual-hub.com/

RUA5208X, RUA6408X, RUA8408X

Scope of delivery

A NOTICE! · Only hold the refrigerator at the body of the refrigerator during transport. Never hold the refrigerator at the absorber unit, the cooling fins, the gas pipes, the door or the control panel.
· Make sure that the refrigerator circuit is not damaged during transportation. The refrigerant in the refrigerator circuit is highly flammable. In the event of any damage to the refrigerator circuit (smell of ammonia): Switch off the refrigerator if applicable. Avoid naked flames and sparks. Air the room well.
· Do not install the refrigerator near naked flames or other heat sources (heaters, direct sunlight, gas ovens etc.).
· Danger of overheating! Always ensure sufficient ventilation so that the heat generated during operation can dissipate. Make sure that the refrigerator is sufficiently far away from walls and other objects so that the air can circulate.
· Check that the voltage specification on the type plate is the same as that of the power supply.
· Do not open the refrigerant circuit under any circumstances.
· Only use the AC connection cable supplied to connect the refrigerator to the AC mains.
· Only use cables with a suitable size.
· Never pull the plug out of the socket by the connection cable.
· The refrigerator may not be exposed to rain.

3 Scope of delivery

Quantity 1 1 1 1 1

Description Refrigerator Drain hose Bottom trim piece Sealing strip (fitted underneath during installation) Installation and Operating Manual

https://manual-hub.com/

Accessories

RUA5208X, RUA6408X, RUA8408X

4 Accessories

Available as accessories (not included in the scope of delivery):

Description LS300 ventilation grille Dometic gas flue kit 3776 RUA5208X only: Door reversing kit

All the accessories are available from specialist dealers. If you have any questions, please contact the dealer or your service partner directly.

5 Intended use
The refrigerators are designed for installation in caravans or motorhomes. They are only suitable for cooling and storing foodstuffs. The refrigerators are not intended for the proper storage of medicine.
The refrigerators are designed to be operated on a DC power supply, AC mains power supply or universal LPG gas.

6 Installing the refrigerator
6.1 Preparing the installation
When installing the refrigerator, note the following: · Ensure that the floor is solid and level. · Ensure that the refrigerator is level. · The refrigerator must be installed so that it is easily accessible for service work,
easy to de-install and install and can be easily removed from the vehicle.

https://manual-hub.com/

RUA5208X, RUA6408X, RUA8408X

RUA 5208X

Installing the refrigerator

RUA 6408X

RUA 8408X

B
https://manual-hub.com/

Installing the refrigerator

RUA5208X, RUA6408X, RUA8408X

· The refrigerator must be installed in a recess so that it stands secure when the vehicle is in motion. Note the following dimensions (fig. 1 and fig. 2):

RUA5208X RUA6408X RUA8408X

Refrigerator Height (A) Width (B) Depth (C) (excludes control knob 5mm) Recess Height (H) Width (W) Depth (D)

Overall dimension in mm

1191

1447

1657

550

677

Dimension in mm

1181 1186

1437 1442

1647 1652

530 535

min. 621

Installation with two side vents

3 RUA 6408X, RUA 8408X

RUA 5208X

3b 6
5 4

1 2

3b 6
5 4

1 2

3a 7
8

3a 7
https://manual-hub.com/

RUA5208X, RUA6408X, RUA8408X

Installing the refrigerator

Pos. in fig. 3, page 8

Description

Insulation wool on top and sides of cabinet

Recommended maximum clearance 25 mm

LS300 ventilation grille

Minimum height is equal to the height of the cabinet

Dometic gas flue kit 3776

Air deflection plate

Floor vent, min. 40 mm (only required if lower air inlet vent is not flush to

the floor)

· The outer wall must be fitted with one air inlet ventilation grille (fig. 3 3a, page 8) and one outlet ventilation grille (fig. 3 3b, page 8) so that the heat generated can be easily released to the outside: Lower air inlet vent LS300 must be installed flush to the vehicle floor. Upper air outlet vent LS300 must be installed with the bottom of the vent no lower than equal to the top of the refrigerator cabinet, the bottom of the top vent can be higher than the cabinet.
· Fit an air deflection plate (fig. 3 6, page 8) above the condenser so that the heat does not accumulate in the vehicle.
· Put insulation wool (fig. 3 1, page 8) on top and sides of the cabinet.
· If the lower ventilation grille of the air inlet vent cannot be installed flush to the floor, an additional vent (fig. 3 7, page 8 and fig. b, page 16) must be provided in the floor for releasing any possible gas leakage.
· The distance between the refrigerator and the rear wall must be at least 10 mm.

https://manual-hub.com/

Installing the refrigerator 4 RUA5208X

RUA5208X, RUA6408X, RUA8408X

10 25

>25

RUA 6408X, RUA 8408X

10 25

>25

https://manual-hub.com/

RUA5208X, RUA6408X, RUA8408X

Installing the refrigerator

· The recommended maximum distance between the refrigerator and the rear wall is 25 mm. A distance of more than 25 mm between the refrigerator and rear wall leads to poor performance and increases the power consumption of the refrigerator. Reduce the space behind the refrigerator to maximum 25 mm to create adequate air inlet and outlet ventilation corridor (fig. 4 and fig. 5). Use a ventilation plate, for example, to do this.

Installation with one lower side vent and one roof vent

RUA 6408X, RUA 8408X

RUA 5208X 6

5 4

1 2

5 4

1 2

3 7

https://manual-hub.com/

Installing the refrigerator

RUA5208X, RUA6408X, RUA8408X

Pos. in fig. 6, page 11

Description

Insulation wool on top and sides of cabinet

Recommended maximum clearance 25 mm

LS300 ventilation grille

Minimum height is equal to the height of the cabinet plus 150 mm

Dometic gas flue kit 3776

Roof vent

Floor vent, min. 40 mm (only required if lower air inlet vent is not flush to

the floor)

· If the minimum distance between the air inlet and outlet vents cannot be met, a roof vent must be installed instead of the air outlet vent. The roof vent should be installed directly above the back of the refrigerator as far as this is possible. Use an air duct if you need to install the roof vent (fig. 6 6) offset, otherwise heat will accumulate there.

300

If a roof air conditioner is installed, the distance between the roof vent (fig. 7 1) and the air outlet of the roof air conditioner (fig. 7 2) must be at least 300 mm.
· The refrigerator must not be installed at the side of the air inlet and outlet vents as this leads to poor performance and increases the power consumption of the refrigerator.
· The air inlet and outlet vents must not be covered by vehicle parts (such as an open door or by installing accessories such as bicycle racks) while operating.
· A separate flue duct must be installed under the air outlet vent, see chapter "Installing the flue duct" on page 19.

https://manual-hub.com/

RUA5208X, RUA6408X, RUA8408X

Installing the refrigerator

· Install the refrigerator so that it is protected from excessive heat, as this leads to poor performance and increases the power consumption of the refrigerator.
· The electrical installation must comply with national and local regulations.
· The gas installation must comply with national and local regulations. AS/NZS 5601.2 Gas installations LP Gas installations in caravans and boats AS/NZS 5601.1 Gas Installations General Installations
· The refrigerator must be installed in a draught-proof location, see chapter "Installing the refrigerator in a sealed location separate to the living space" on page 13.

6.2 Installing the refrigerator in a sealed location separate to the living space
Gas-powered refrigerators in caravans or motorhomes must be installed in a sealed location. This means that the combustion air can not be extracted from the interior and exhaust fumes are prevented from directly entering the living space.
A suitable seal must be provided and fitted between the rear wall of the refrigerator cabinet and the interior of the vehicle. The purpose is to provide a seal between the interior of the vehicle and the cooling unit and ventilation area behind the refrigerator.
! WARNING! Fire hazard! Do not use flammable materials such as silicone sealants, foam or similar for the draught-proof installation.
The manufacturer has applied a sealing strip to the rear surface of the front frame.
8

1.
https://manual-hub.com/

Installing the refrigerator 9

RUA5208X, RUA6408X, RUA8408X

2.
1. Apply the sealing strip to all four sides of the bottom surface of the refrigerator
(step 1. in fig. 8 and fig. 9). Push the refrigerator into position (step 2. in fig. 8 and fig. 9). This then seals
the space behind the refrigerator to the interior of the vehicle. OPTIONAL: If the refrigerator stands on a platform, install the bottom trim piece in order to
seal the space between the refrigerator and the platform. 0

1
A sealing strip (fig. 0 1) is applied to the lower surface of the bottom trim piece.

https://manual-hub.com/

RUA5208X, RUA6408X, RUA8408X a
1 2

Installing the refrigerator

Push the bottom trim piece with the four plugs (fig. a 1) into the holes on the front frame of the refrigerator.
Snap the three catches (fig. a 2) into the holes under the bottom frame of the refrigerator.
6.3 Making air inlet and outlet vents
I NOTE At high ambient temperatures, the refrigerator can only provide its maximum cooling capacity if the optimum ventilation has been provided.
Make a cut out in the wall to fit the LS300 for the upper and lower vent system, see chapter "Preparing the installation" on page 6.
If the lower ventilation grille can not be installed flush to the floor, make an air inlet vent in the floor (fig. b, page 16) behind the refrigerator near the gas burner.

https://manual-hub.com/

Installing the refrigerator b

RUA5208X, RUA6408X, RUA8408X
40 mm

Shield the end of the opening with a deflector to prevent sludge or dirt from getting inside while driving (fig. b).
If you have to use a roof vent instead of an upper wall vent: Cut out a section in the roof. Refer to the roof vent instruction manual for the
required dimensions. When doing so, observe the information, see chapter "Preparing the installation" on page 6.
6.4 Installing the drain water hose
To avoid damage on the drain water hose, position the hole for the drain water hose in a way, that the hose does not touch the boiler casing.
Drill a hole through the floor at the rear of the refrigerator. Install the drain water hose through the drilled hole. Ensure, that the drain water
hose is long enough in order to drain the water outside of the vehicle. Ensure that the drain water hose is not kinked. Seal the area around the drain water hose.

https://manual-hub.com/

RUA5208X, RUA6408X, RUA8408X
6.5 Installing the ventilation grille

2 1

Installing the refrigerator

No. in fig. c 1 2 3

Description Slider Ventilation grille Installation frame

Ensure the installation frame is water resistant (fig. d).
Insert the installation frame and screw it down tightly (fig. e). Use all the fixing holes for this.

https://manual-hub.com/

Installing the refrigerator f
3.

RUA5208X, RUA6408X, RUA8408X 2.
1.

Fit the ventilation grille (step 1. and step 2. in fig. f). Insert the slider and lock the ventilation grille with it (step 3. in fig. f).

6.6 Install the roof vent

No. in fig. g 1 2

Description Hood Installation frame

Ensure the installation frame is water resistant (fig. h).

https://manual-hub.com/

RUA5208X, RUA6408X, RUA8408X i

Installing the refrigerator

Insert the installation frame and screw it down tightly (fig. i 1). Use all the fixing holes for this.
Insert the hood and screw it down tightly (fig. i 2).
6.7 Installing the flue duct
j
1 2 3

10 9
EN

4 5 6 7 8
https://manual-hub.com/

6
19

Installing the refrigerator

RUA5208X, RUA6408X, RUA8408X

I NOTE · Install the Dometic gas flue kit 3776. Contact the customer service (see back page). · It is not recommended to install additional flue stacks, as this leads to poor performance and increases the power consumption of the refrigerator. · Mount the flue duct under the upper ventilation grille (fig. j 1).

Install the flue duct as follows:

1.
1. 3.

min. 15 mm
2.

Make a rectangular opening in the outer wall of the vehicle (fig. k). The opening must be as wide as the flue pipe (fig. j 3, page 19). The opening must be high enough that the flue pipe fits through at a 45° angle.
Insert the coil (fig. j 7, page 19) in the flue pipe (fig. j 8, page 19) of the refrigerator.
Place the T-piece (fig. j 4, page 19) on the adaptor (fig. j 5, page 19) and the flue pipe (fig. j 8, page 19) of the refrigerator.
Direct the T-piece at an angle of 45° towards the rear wall.
Attach the T-piece, adaptor and flue pipe with a screw (fig. j 6, page 19).

https://manual-hub.com/

RUA5208X, RUA6408X, RUA8408X

Installing the refrigerator

Install the mounting plate (fig. l).
Fill the opening with fire-resistant material (e.g. stone wool (fig. l).
I NOTE In some installation situations, it is possible that the flue pipe would extend too far out of the vehicle in its installed state. Shorten the flue pipe to the correct length if necessary.

Slide the flue pipe at least 15 mm on the T-piece (fig. l). m

Attach the cover for the flue stack outside on the vehicle (fig. m).
6.8 Securing the refrigerator
! CAUTION! Only screw through the bushes built into the refrigerator, otherwise foamed components, including electrical wiring, can be damaged.
I NOTE Ensure that the screws are tight, even when under increased loads (while driving).
Push the refrigerator firmly into its final location with the front flange sitting hard against the recess front.

https://manual-hub.com/

Connecting the refrigerator n

RUA5208X, RUA6408X, RUA8408X 21

Push the screws (fig. n 1) through the plastic bushes in the sides of the refrigerator, and fasten into the recess walls.
Fit the caps (fig. n 2) into the bushes.

7 Connecting the refrigerator

7.1 Connecting to the gas supply
A NOTICE! · This refrigerator may only be connected to the gas supply by a specialist in accordance with the applicable guidelines and standards. · Only use cylinders of universal LPG gas fitted with an approved gas pressure regulator. Compare the pressure information on the data plate with the pressure information on the pressure regulator on the gas cylinder. · Only operate the refrigerator at the pressure shown on the data plate. · Only operate the refrigerator with the type of gas shown on the data plate. · Please note the pressures which are permitted in your country. Only use pressure controllers with a fixed setting which comply with the national regulations.

https://manual-hub.com/

RUA5208X, RUA6408X, RUA8408X

Connecting the refrigerator

I NOTE The pressure of the gas supply must be 2.75 kPa. Check the pressure at the test point before using the refrigerator (fig. o 1, page 23).

It must be possible to shut off the refrigerator from the gas line separately by means of a shut-off device. The shut-off device must be easily accessible.
o

Connect the refrigerator securely to the gas supply (fig. o). Always use a back up wrench when loosening and tightening connections.
Have a leak test and a flame test performed by an authorised specialist after professional installation. Ensure you are issued with a certificate of inspection.

https://manual-hub.com/

Connecting the refrigerator

RUA5208X, RUA6408X, RUA8408X

7.2 Connecting the device to electrical power supply

A NOTICE! · The electrical installation and repairs may only be performed by a specialist in accordance with the applicable regulations and standards. · The device can be connected to 12 V DC and 230 240 V AC power supply. · The respective negative and positive cables of the DC connections for heating and controls may not be joined with one another in a caravan. This can cause electrical interference or damage to electrical components. · DC connection to the heating element must be made to the vehicle engine battery, connection only while engine is running (fig. p).
I NOTE · The mains socket must be easily accessible so that you can unplug the power cord if required, thereby disconnecting the refrigerator from the power. · The plug of the AC connection cable must not be cut off. · The connection cables must be laid so that they do not come in contact with hot parts of the unit/burner or with sharp edges. · Changes to the internal electrical installation or the connection of other electrical components (e.g. extra third party fans) to the internal wiring of the refrigerator will void any claims from the guarantee and product liability.

https://manual-hub.com/

RUA5208X, RUA6408X, RUA8408X

Connect the device as follows: RUA 5208X

q 1

23 4

(

Connecting the refrigerator
67 8 5

8 10

HV-

26 25

+ - D+

27 24

85 87 86 30

22 21 20

S232 CIB HRLY

GVAL NTC1 NTC2

LED+ LED-

AC IN AC OUT PV+ 12VDC

DISPLAY

9 10
19 18
17 16

12 11
13 14

https://manual-hub.com/

Connecting the refrigerator

RUA6208X, RUA8408X

3 4

(

RUA5208X, RUA6408X, RUA8408X 67 8
5

8 10

HV-

26 25

+ - D+

27 24

85 87 86 30

22 21 20

HRLY

CIB

S232

GVAL NTC1 NTC2

LED+ LED-

AC IN AC OUT PV+ 12VDC

DISPLAY

9 10
19 18
17 16

12 11
13 14 15

https://manual-hub.com/

RUA5208X, RUA6408X, RUA8408X

Connecting the refrigerator

Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Description Connection cable for AC connection Heater 240 V AC Earth for CU Protective Earth Electrode Outer fan 1 Fan thermostat Outer fan 2 Ignition port Power module Control button Display Inner fan LAC and defrost heater Frame heater (RUA6208X, RUA8408X only) Gas valve Temperature sensor Lamp Door sensor Gas inlet 12 V DC heater Relay 12 V DC vehicle battery connection Thermostat D+ to alternator connection 12 V DC house battery connection Thermofuse

https://manual-hub.com/

Connecting the refrigerator

RUA5208X, RUA6408X, RUA8408X

AC power Connect the refrigerator with the mains plug to an AC socket.

DC power
Please note the following cable sizes: 12 V DC vehicle battery connection: 10 mm2 12 V DC house battery connection: 1 mm2 Connection D+: 0.5 mm2 Total cable length: max. 8 m
Protect the DC power supply for the 12 V DC heater with 30 A fuse.
Protect the DC power supply for controls with 3 A fuse.
Run cables to the heating element via a relay or suitable means controlled by an ignition switch to prevent battery from completely discharging, if the engine is switched off (fig. p, page 24).
Connect vehicle battery cables to the respective plus and minus terminal (fig. q 23, page 25).
Connect house battery cables to the respective plus and minus terminal (fig. q 26, page 25).

D+
In automatic mode, the refrigerator selects the most favourable mode available. The refrigerator is only operated with DC power when the vehicle engine is running. The electronics of the refrigerator uses the signal D+ from the vehicle alternator to detect the running engine.
Connect the D+ connection to the controls (fig. q 25, page 25) with the respective terminal of the vehicle.

https://manual-hub.com/

RUA5208X, RUA6408X, RUA8408X

Connecting the refrigerator

7.3 Alternative connection methods for DC power supply

Refrigerator DC connections

D+

Control Element DC

DC B E F

House Battery

Anderson Plug

Anderson cables must be the recommended size.

Connection to suit motor home or caravan with the D+ wire connected to the vehicle alternator or ignition switch.
No house battery recharging from the vehicle.
The D+ connection is taken to the vehicle alternator.

Refrigerator DC connections

D+

Control Element DC

DC B E F

House Battery

Vehicle Anderson plug must be controlled by ignition relay.

Anderson Plug

Anderson cables must be the recommended size.

Anderson plug controlled by vehicle relay to the ignition switch. Power can only be supplied if the engine is running.
No house battery recharging from the vehicle.

https://manual-hub.com/

Connecting the refrigerator u

RUA5208X, RUA6408X, RUA8408X

Refrigerator DC connections

D+

Control Element DC

DC B E F

Vehicle Anderson plug must be controlled by ignition relay.

House Battery

Fridge Switch

Anderson Plug

Anderson cables must be the recommended size.

Using a fridge movement switch to add 12 Vg to the D+ connection wire, only when the vehicle is moving.
No house battery recharging from the vehicle.
The D+ is turned on and off via an optional fridge movement switch.

Refrigerator DC connections

D+

Control Element DC

DC B E F

Vehicle Anderson plug must be controlled by ignition relay.

House Battery

Fridge Switch

Anderson Plug

Anderson cables must be the recommended size.

Using a fridge movement switch to add 12 Vg to the D+ connection wire, only when the vehicle is moving. The Anderson plug connection must keep the house battery fully charged.
House battery recharged by vehicle.
The D+ is turned on and off via an optional fridge movement switch.

https://manual-hub.com/

RUA5208X, RUA6408X, RUA8408X w

Connecting the refrigerator

Refrigerator DC connections

D+

Control Element DC

DC B E F

House Battery

Vehicle Anderson plug must be controlled by ignition relay.

Anderson Plug

Anderson cables must be the recommended size.

Anderson plug recharging the house battery via a power diode. The D+ wire can only get a 12 V signal when the battery is being charged.
House battery recharged by vehicle.
The D+ is turned on and off by the vehicle starting and stopping.

https://manual-hub.com/

4450019507 4445102445 570-MAW40B03 06/2019

dometic.com

YOUR LOCAL DEALER
dometic.com/dealer

YOUR LOCAL SUPPORT
dometic.com/contact

YOUR LOCAL SALES OFFICE
dometic ,*0)"0,= "s

*+-)"1")&01*#*+"1& *+-,&"04%& % *+-/&0"1%"*+"1&
/*2- ,"#*2,!&,1%"-2)& 9)&,$0*# DOMETIC GROUP AB"+3E/,0$1,ccC*),4"!",
https://manual-hub.com/

	Dometic 10-Series Refrigeration Installation Manual Comprehensive installation manual for Dometic 10-Series absorption refrigerators (RM10.5(S)(T), RMS10.5(X)(S)(T)), covering installation, connection, safety, and technical specifications for RVs and caravans.
	Dometic RMD 10.5XS Installation Manual - Refrigeration for Caravans & Motor Homes Comprehensive installation manual for the Dometic RMD 10.5XS absorption refrigerator. Learn how to safely install and connect this refrigeration unit in caravans and motor homes. Includes safety instructions and technical specifications.
	Dometic Absorption Refrigerators RUA 5308X, RUA 6508X, RUA 8508X Operating Manual This operating manual provides comprehensive instructions for the Dometic RUA 5308X, RUA 6508X, and RUA 8508X absorption refrigerators, covering installation, safe operation, maintenance, and troubleshooting for caravan and motor home use.
	Dometic 10-Series Absorption Refrigerator Installation Manual Comprehensive installation guide for Dometic 10-Series absorption refrigerators (RMD 10.5T, RMD 10.5XT), covering safety precautions, installation procedures, ventilation, gas and electrical connections, and technical specifications.
	Dometic DM & DMA Refrigerators Operating Manual This operating manual provides comprehensive instructions for the Dometic DM and DMA series refrigerators, covering safety, installation, operation, maintenance, troubleshooting, and disposal. It details features like automatic energy selection, different operating modes (AC, Gas, DC), ice maker usage, and storage compartment guidelines.
	Dometic RUC Series Compressor Refrigerators: Installation and Operating Manual Official installation and operating manual for Dometic RUC5308X, RUC6508X, and RUC8508X compressor refrigerators. Covers safety, installation, usage, maintenance, and troubleshooting for RVs and boats. Visit dometic.com for more information.
	Dometic 8 Series Absorption Refrigerators: Installation Manual for RM, RMD, RMS Models This installation manual provides comprehensive guidance for Dometic 8 Series absorption refrigerators, including models RM8506, RM8556, RMD8506, RMD8556, RMS8406, RMS8506, and RMS8556. It details safety precautions, installation steps, ventilation requirements, and electrical/gas connections for RV and mobile home use.
	Dometic RCD 10.5XES Compressor Refrigerator: Installation and Operating Manual Comprehensive guide for installing and operating the Dometic RCD 10.5XES 10-Series compressor refrigerator. Includes safety, technical specifications, installation steps, operation, maintenance, and troubleshooting.

References

Related Documents