Instructions for Use

Revision 1.0

Model: ADSA-1S6

Superspeed USB Adapter for 2.5" HDD/SSD

How to Use

Turn on the computer.
Connect the USB adapter to the SATA connector of the 2.5" HDD/SSD.
Connect the adapter to a USB port on your computer.
The hard disk drive (HDD) or solid-state drive (SSD) will be detected and installed automatically.

INFO: If you wish to disconnect the drive, ensure that all data copying is complete and the data transfer indicator light is not blinking.

Technical Specifications

Feature	Specification
Input Interface	USB 3.2 Gen 1 (USB 3.0) – USB 2.0, 5000 – 480 Mbit/s (SuperSpeed – HighSpeed), USB Mass Storage Class, USB Type A male connector
Output Interface	SERIAL ATA specification revision 3.1, 6 – 3 – 1.5 Gbit/s (SATA/600 – SATA/300 – SATA/150), 2.5" SATA III / II / I HDD disks supported with all capacities, adapter and disk located in the case - max. disc thickness 9.5 mm, use without case - without limiting the thickness of the disk, 22-pin SATA data and power female, 5 Gbit/s theoretically (given by USB input)
Power Supply	Power through USB bus
Other Features	UASP (USB Attached SCSI Protocol) and BOT (Bulk-Only Transport) AUTOMATIC INSTALLATION: Plug & Play, Hot Plug, S.M.A.R.T., TRIM, Auto Spindown, HDD Turn Off
LED Indication	BLUE LED indicates connection to PC & HDD activity
OS Supported	WINDOWS XP – Vista – 7 – 8 – 8.1 – 10 & later, Server 2008 – 2012 – 2016 & later (32 & 64bit versions supported), OS X 10.x & later, Linux 2.6.x & later

Package Contents

USB adapter
Cable
Plastic case
Foam pads for 7mm disks
Multilanguage quick guide

Product Support

For more information, FAQs, manuals, and drivers, visit the product page in the PRODUCT SUPPORT tab at www.axagon.eu.

If you need further assistance, contact technical support at support@axagon.cz.

Manufacturer & Compliance

Manufacturer: RealQ s.r.o. - Železná 5, 619 00 Brno, Czech Republic

All rights reserved. All text and pictorial materials contained in this document are protected by Copyright Act. All marks indicated here are the registered trademarks of their appropriate owners. Specifications are subject to change without prior notice. Made in CHINA for Axagon.

EU Declaration of Conformity: The device complies with the harmonisation legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The complete EU declaration of conformity is available from the manufacturer.

Important User Information: Before using the product, the user is obliged to read the user instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than specified must be consulted with the manufacturer. Do not use the product in humid or explosive environments and near flammable substances.

At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programmes in your country, contact your local authorities or the retailer who sold you the product.

	AXAGON ADSA-1S USB 2.0 to 2.5" SATA Adapter User Manual Instructions and technical specifications for the AXAGON ADSA-1S USB 2.0 to 2.5" SATA adapter, enabling connection of 2.5" SATA HDDs and SSDs to computers via USB 2.0.
	Axagon RSS-CD09 2.5-inch SATA SSD/HDD Caddy Installation Guide Step-by-step instructions for installing a 2.5-inch SATA SSD or HDD into a 5.25-inch optical drive bay using the Axagon RSS-CD09 caddy. Includes package contents and compatibility notes.
	AXAGON EE25-XA6C ALINE BOX USB-C 5Gbps Enclosure for 2.5" SSD/HDD - Instructions for Use User manual and installation guide for the AXAGON EE25-XA6C ALINE BOX, a USB-C 5Gbps enclosure for 2.5-inch SSD/HDD drives. Includes assembly, connection, and troubleshooting steps.
	AXAGON ADM2-CM USB-C 10Gbps M.2 Adapter User Guide User instructions and technical overview for the AXAGON ADM2-CM, a USB-C 10Gbps adapter for M.2 NVMe and SATA SSDs, detailing installation and connection.
	AXAGON EEM2-SG2: SuperSpeed+ USB-C M.2 NVMe & SATA SSD Enclosure User Guide Detailed instructions for the AXAGON EEM2-SG2 external enclosure. Learn how to install and use M.2 NVMe and SATA SSDs with USB-C 3.2 Gen 2 for high-speed data transfer.
	AXAGON ADE-SR Gigabit Ethernet SuperSpeed USB Adapter - Installation and Specifications Get detailed installation instructions, technical specifications, and support information for the AXAGON ADE-SR Gigabit Ethernet SuperSpeed USB Adapter. Connects via USB 3.0 for high-speed networking.
	AXAGON RSI-20 SATA to IDE Adapter - Quick Installation Guide Concise guide for installing the AXAGON RSI-20 adapter, which connects 3.5" IDE hard drives or 5.25" ATA/ATAPI drives to a PC's SATA interface. Includes technical specifications, installation steps, and warranty information.
	Axagon ADM2-AM USB-A 10Gbps M.2 NVMe & SATA SSD Adapter Instructions This document provides instructions for the Axagon ADM2-AM, a USB-A 10Gbps adapter for M.2 NVMe and SATA SSDs. It covers installation, compatibility, and usage.