REFCO VAMP-F Condensate Pump Quick Guide

Key Features and Installation

The VAMP-F pump is designed for indoor use and must be installed horizontally within the enclosure of the equipment it serves. Ensure proper connection of the flexible hose with filter to the drain pan outlet and connect the discharge tube to the pump. Refer to the detailed diagrams for correct hose and wiring connections. Always disconnect electrical power before commencing any installation or maintenance work.

Safety Precautions

WARNING: Always disconnect electrical power before installation, maintenance, or service. Follow all local safety regulations and electrical codes. Installation should only be performed by trained personnel. This appliance is not intended for use by individuals with reduced physical, sensory, or mental capabilities, or lack of experience. Ensure the installation cable is undamaged and correctly replaced if necessary. Avoid contact with chemicals.

Technical Specifications

The VAMP-F pump offers a maximum flow rate of 22 l/h (6 GPH) and can handle a maximum cooling capacity of 18.5 kW (63,000 BTU/h). It has a maximum discharge height of 15 m (50 ft) and a maximum suction lift of 2 m (6.5 ft). The pump operates on 100-240 VAC, 50/60 Hz, with a power consumption of 6 W (0.6 W idle). It features an alarm relay rating of normally-closed, failsafe 250 VAC, 5 A or 30 VDC, 5 A, and has an ingress protection rating of IP67 for the pump and IP44 for the cable connector. Operating temperature range is 3°C to 40°C.

Maintenance

Regular maintenance is required, including cleaning the reservoir and filters to ensure optimal performance and longevity of the VAMP-F condensate pump.

Contact Information

For more information, please visit:

• REFCO Manufacturing Ltd.
• REFCO Manufacturing (US) Inc.