Introduction
The SICCE Shark PRO Internal Filter is a high-performance filtration system designed for aquariums. This manual provides essential information for the safe and effective operation of the Shark PRO filter, including technical specifications, safety precautions, and maintenance guidelines. SICCE is dedicated to providing innovative solutions for water applications, ensuring a healthy environment for aquatic life.
Key Features
- Efficient internal filtration for aquariums
- Available in multiple models (500, 700, 900) to suit different tank sizes
- High-quality filter media for optimal water clarity and biological filtration
- Easy installation and maintenance
- Durable construction for long-lasting performance
Technical Specifications
Refer to the table below for detailed technical specifications:
| Model | Aquarium Capacity | Filter Volume | Foam Filtration Surface | Wattage | Pump Output |
|---|---|---|---|---|---|
| Shark PRO 500 | 40-140 L (11-37 US gal) | 310 cm³ (19 cubic in.) | 100 cm² (16 sq. in.) | 4W | 500 l/h (140 US gph) |
| Shark PRO 700 | 120-200 L (32-53 US gal) | 620 cm³ (38 cubic in.) | 200 cm² (32 sq. in.) | 7W | 700 l/h (190 US gph) |
| Shark PRO 900 | 180-260 L (48-70 US gal) | 930 cm³ (57 cubic in.) | 300 cm² (48 sq. in.) | 10W | 900 l/h (240 US gph) |
Note: Specifications are subject to change without notice.
Important Safety Instructions
WARNING: To guard against injury, basic safety precautions should be observed. Always read and follow all safety instructions provided in the manual. Ensure the appliance is properly grounded and connected to a circuit protected by a Ground Fault Circuit Interrupter (GFCI).
Key safety points include:
- Always unplug the filter before performing any maintenance or cleaning.
- Do not operate the filter if the cord or plug is damaged.
- Keep electrical components dry and away from water splashes.
- Ensure the filter is securely installed in the aquarium.
- Close supervision is necessary when the appliance is used by or near children.
Spare Parts
Various spare parts are available for the SICCE Shark PRO filter, including filter media, impellers, and housings. Please refer to the spare parts list in the manual for specific part numbers and compatibility.
Common spare parts include:
- STR0044 (Impeller)
- SPL0123 (Housing)
- SSP0040 (Filter Sponges)
- SKT0306 (Filter Box)
- SVA0020 (Active Carbon Media)
- SVA0019 (Zerophos Media)
- SVA0018 (Biopearl Media)
Contact Information
For further assistance or to inquire about spare parts, please contact SICCE directly through their official website or authorized distributors.
Sicce Corporate
Sicce Corporate
Sicce Corporate
