6 SIDED CANOPY SHELTER USER MANUAL

Introduction

VEVOR is committed to providing tools with competitive prices. The terms "Save Half" and "Half Price" represent an estimate of savings compared to major brands and may not apply to all categories. Please verify savings when ordering.

This is the original instruction manual. Please read all instructions carefully before operating. VEVOR reserves the right to interpret this user manual. Product appearance is subject to the received item. VEVOR may update technology or software without prior notice.

Important Safety Information

Warning: To reduce the risk of injury, user must read instructions manual carefully.

NOTICE: Please retain instructions for future needs.

1. Look out for apparent hazards at your chosen location.
2. Avoid setting up in low-lying areas, especially if rain is expected.
3. Find a flat, level space for proper tent setup.
4. Clear the chosen area of any debris that could damage the tent or create an uneven surface.
5. Ensure ventilation to prevent internal condensation.
6. Follow the packaging method carefully when unpacking to aid in repacking.

Specifications

Model: 3m

Model: 3.6m

Assembly Instructions

Parts Included:

• A: 2PCS
• B: 11PCS
• C: 5PCS

STEP 1: Spread the screen house on the ground.

STEP 2: Pull the side panel by the metal ring until it is fully open and locked into position.

STEP 3: Repeat STEP 2 for each of the side panels.

STEP 4: Once all side panels are fully open, walk inside the Screen house and push upwards from the centre hub of the roof until it is fully open and locked into position.

STEP 5: Pre-assemble the fibreglass door poles. On both sides of the door, insert a fibreglass pole into the bottom and top pockets. Attach with ties to hold in place. Ensure the Screen house is taut when pegging so it forms the correct shape.

Contact Information

For product questions or technical support, please visit:

Technical Support and E-Warranty Certificate

Manufacturer and Importer Information

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

EC REP: E-CrossStu GmbH.

Address: Mainzer Landstr.69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED.

Address: C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Imported to AUS: SIHAO PTY LTD.

Address: 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd.

Address: Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730