GE Profile™ 30" Built-In Touch-Control Induction Cooktop

Dimensions and Installation Information (In Inches)

IMPORTANT: Requires a 3" free area between the bottom of the cooktop and any combustible material, i.e., shelving. Free area not required when installing a wall oven underneath the cooktop. Refer to installation instructions. Requires a 15" minimum from cooktop to adjacent overhead cabinets. Units are furnished with a 48" flexible armored cable.

NOTE: 30" induction cooktops are approved for use over select GE 27" and GE 30" Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/warming drawer installation instructions packed with product for current dimensional data. If installed with a GE Telescopic Downdraft System, consult both the cooktop and downdraft installation instructions packed with product before installing. Cooktop gas/electric supply may need to be re-routed to install downdraft. The countertop cutout requires 23-1/2" minimum flat countertop surface and 25" minimum total countertop depth. In addition, other clearances to the front edge of the countertop must be considered. Before installing, consult installation instructions packed with product for current dimensional data.

CUTOUT FILLER TRIM KIT: A filler trim kit is available for use if your countertop cutout is larger than the dimension shown, up to 29-13/16" x 20-7/16". Order JXTR32B for black or JXTR32W for white, to reduce the cutout opening for installation of this cooktop. These kits may be ordered from your GE Appliances Dealer.

Approximate Cooking Dimensions

Diagram showing various dimensions for installation:

• 4-5/8" at baffle near center of unit (except when installed above an approved wall oven) and 3-1/4" at rear of air intake
• 1-3/4" MIN. to rear wall
• 29-7/8" width
• 21" depth
• 19-1/4" cutout width
• 2-1/2" MIN. required
• 28-1/2" to 28-5/8" cutout width
• 28-1/16" cutout depth
• 19-5/8" to 19-3/4" cutout depth

To ensure accuracy, it is best to make a template when cutting the opening in the counter.

Installation Above a Wall Oven

Diagram showing clearances for installing the cooktop above a wall oven:

• 2-1/2" MIN. from front edge of countertop to front edge of cooktop cutout
• 31-1/4" MIN. from top surface of countertop to top surface of wall oven support platform
• 13" MAX. depth of unprotected overhead cabinets
• 30" MIN. Clearance from countertop to unprotected overhead surface
• See label next to nameplate for MIN. clearance to rear wall.
• 2" MIN. Clearance from cutout to nearest vertical wall or cabinet on the right side of the unit below the 15" MIN. clearance height.
• 2" MIN. clearance to side wall from cut-out on the left of the unit
• 15" MIN. height from countertop to nearest cabinet (including light rails) on both sides of cooktop

Specifications

NOTE: Check local codes for required breaker size.

Features and Benefits

• Maximum Responsiveness - 19 Control Levels
• Power Boil
• Precision Temperature Control
• Easy Clean Surface
• Safe Surface
• Most Efficient Heating
• Synchronized Elements
• Chef Connect
• Smart Cookware Rebate for 11" Smart Pan
• Timer
• Built-in WiFi
• Control Lock
• Fit Guarantee
• Model PHP9030STSS - Stainless Steel

Smart Cookware Rebate

Smart pans pair with this smart cooktop to ensure you get the perfect cooking results. Earn a rebate for a free 11" Hestan Cue Smart Pan.

Optional Filler Trim Kit

Fill in any countertop gaps with this filler trim kit. Order part number JXTR32B.

Optional Sous Vide Probe

A Sous Vide Probe lets you achieve great results on the stove. Order part number JXPROBE1.

Guaranteed Fit

Replacing a similar cooktop from GE Appliances or another brand? GE cooktops are guaranteed for an exact fit or GE Appliances will pay up to $100 toward modifications. Visit geappliances.com for more info.