GE Profile™ 36" Built-In Touch-Control Electric Cooktop (PEP9036DT)
Dimensions and Installation Information
IMPORTANT:
- Requires a 5-inch free area between the bottom of the cooktop and any combustible material, such as shelving. This free area is not required when installing a wall oven underneath the cooktop. Refer to the specific installation instructions.
- Requires a 15-inch minimum clearance from the cooktop to adjacent overhead cabinets.
- Units are furnished with a 48-inch flexible armored cable.
NOTE:
- 36-inch Ribbon cooktops are approved for use over select GE 30-inch Single Wall Ovens and Warming Drawers. Always refer to the cooktop and wall oven/warming drawer installation instructions packed with the product for current dimensional data.
- If installing with a GE Telescopic Downdraft System, consult both the cooktop and downdraft installation instructions packed with the product before proceeding. The cooktop's gas/electric supply may need to be re-routed to accommodate the downdraft installation.
- The countertop cutout requires a minimum of 23-1/2 inches of flat countertop surface and a minimum total countertop depth of 25 inches.
- Additional clearances to the front edge of the countertop must also be considered.
- Before installing, consult the installation instructions packed with the product for the most current dimensional data.
Approximate Cooking Dimensions
The diagram illustrates approximate cooking dimensions for the 36-inch cooktop. It shows a top-down view indicating the overall cooktop width of 36 inches and a depth of 20-3/8 inches. Key cutout dimensions are provided: a width of 33-7/8 to 34 inches and a depth of 19-1/8 to 19-1/4 inches. Clearances from the unit and conduit location are noted as 3-9/16 inches at the front and 5-9/16 inches at the conduit location. A minimum clearance of 1-3/4 inches is required to the rear wall. A minimum cutout depth of 2-1/2 inches is also indicated. The text advises making a template for accurate cutting.
Installation Above a Wall Oven Clearances
This diagram details installation clearances when the cooktop is mounted above a wall oven. It specifies a maximum depth for unprotected overhead cabinets at 13 inches. A minimum clearance of 30 inches is required from the countertop surface to any unprotected overhead surface. Side clearances to vertical walls or cabinets are shown: a 2-inch minimum on the left side of the cutout, and 1.5-inch (for 30-inch units) or 2-inch (for 36-inch units) minimum on the right side, measured below the 15-inch minimum clearance height. A 15-inch minimum height clearance is mandated from the countertop to the nearest cabinet, including light rails, on both sides of the cooktop. For installation over a wall oven, a minimum of 31-1/4 inches is required from the top surface of the countertop to the top surface of the wall oven support platform.
Electrical Specifications (60Hz AC)
Specification | 240V | 208V |
---|---|---|
Connected Load (MAX.) | 10.9kW | 8.2kW |
Current Draw (MAX.) | 45.4 Amps | 39.4 Amps |
Recommended Circuit Breaker | 50 Amps | 40 Amps |
NOTE: Check local codes for required breaker size.
Certifications include ADA Compliant and UL Listed by Underwriters Laboratories.
For product questions, visit geappliances.com or call GE Answer Center Service at 800.626.2000.
Specification Revised 10/22.
Features and Benefits
- Power Boil on Tri- and Dual-Ring Elements
- Precision Temperature Control
- Guided Cooking
- Glide Touch Controls with 19 Control Levels
- Easy Clean Surface
- Built-in WiFi
- Synchronized Elements
- Chef Connect
- Keep Warm Setting
- Control Lock
- Hot Surface Indicator Lights
- Fit Guarantee
Model PEP9036DTBB is available in Black on black.
Optional Accessories and Programs
Optional Stainless Steel Clad Aluminum Griddle: Achieve even results with this lightweight griddle, tailored to fit GE SyncBurners. Order part number JXGRIDL1.
Guaranteed Fit: GE Appliances guarantees an exact fit for GE cooktops when replacing a similar cooktop from GE Appliances or another brand. If modifications are needed, GE Appliances will pay up to $100 toward them. Visit geappliances.com for more information.
Smart Cookware Rebate: Smart pans easily pair with this smart cooktop to ensure perfect cooking results. Earn a rebate for a free 11-inch Hestan Cue Smart Pan.