FSP400-70MPE Power Supply Unit

This document outlines the technical specifications and features of the FSP400-70MPE, a 400W ATX power supply unit designed and manufactured by FSP Power Solution GmbH.

General Information

Model: FSP400-70MPE

Manufacturer: FSP Power Solution GmbH

Product Type: ATX Power Supply Unit

Rated Output Power: 400 Watts

Efficiency Certification: 80 PLUS Bronze (typical)

Form Factor: ATX

Key Features

Reliable power delivery for desktop computer systems.
Compact ATX form factor for broad compatibility.
Equipped with essential protection features for component safety.
Efficient operation contributing to lower energy consumption.
Quiet cooling solution.

Electrical Specifications

The following table details the input and output electrical characteristics:

Parameter	Specification
Input Voltage	100-240 VAC
Input Current	6-3 A
Input Frequency	50-60 Hz
PFC	Active PFC (APFC)
Output Rails
+3.3V	20 A
+5V	20 A
+12V	30 A
-12V	0.3 A
+5Vsb	2.5 A
Total Output Power	400 W

Connectors

The unit typically includes the following connectors:

1x ATX 20+4 Pin Motherboard Connector
1x ATX12V / EPS 4+4 Pin CPU Connector
2x PCIe 6+2 Pin Graphics Card Connectors
4x SATA Connectors
2x Molex 4-Pin Peripheral Connectors

Protection Features

The FSP400-70MPE incorporates several safety protections:

OVP: Over Voltage Protection
UVP: Under Voltage Protection
OPP: Over Power Protection
SCP: Short Circuit Protection
OCP: Over Current Protection
OTP: Over Temperature Protection

Mechanical and Environmental Specifications

Parameter	Specification
Dimensions (W x H x D)	150 mm x 86 mm x 140 mm (Standard ATX)
Cooling System	120 mm Fan
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 70°C
Operating Humidity	20% to 90% RH (non-condensing)

Safety and Compliance

The power supply unit is designed to meet various international safety and electromagnetic compatibility standards, including but not limited to:

CE (Conformité Européenne)
TÜV Rheinland
EAC (Eurasian Conformity)

Note: Specific certifications may vary by region and revision.

	FSP 500W Medical ATX Power Supplies - MPE Series Datasheet Technical datasheet for FSP's MPE Series 500W Medical ATX Power Supplies, detailing features, specifications, safety approvals, and mechanical dimensions. Includes input/output ratings, environmental conditions, and EMC performance.
	FSP180-50FEB Flex ATX 180W Power Supply Datasheet Technical datasheet for the FSP180-50FEB, a 180W Flex ATX switching power supply. Features 80 Plus Bronze certification, high reliability, and compliance with safety standards for industrial applications.
	FSP YH5601-1VAR0A2D 1U Redundant 600W Power Supply Datasheet Technical datasheet for the FSP YH5601-1VAR0A2D, a 1U redundant 600W AC/DC power supply designed for IPC, storage, embedded servers, and networking applications. Features include wide input voltage range, high efficiency, and compliance with various safety standards.
	FSP Power Supplies: Compliance Certificates for Medical and Dental Applications Compilation of UL Solutions Certificates of Compliance for FSP Group Inc. power supplies, including models FSP400-70MPE, FSP500-70MPE, TMPC-400E, and TMPC-500E, certified for medical and dental equipment.
	FSP400-50RDB 400W 1U Redundant Switching Power Supply Datasheet Technical datasheet for the FSP400-50RDB, a 400W 1U redundant switching power supply designed for industrial environments, IPC controllers, and workstations. Features 80 Plus Bronze efficiency, hot-swappable modules, and comprehensive safety approvals.
	FSP 1U Redundant YH5151-1EXR Power Supply Datasheet Detailed technical specifications for the FSP YH5151-1EXR 1U redundant power supply. Features 150W output, 80 Plus SILVER efficiency, PMBus 1.2 support, N+1 redundancy, and application in IPC, storage, and embedded servers.
	FSP500-70MPE Power Supply - FSP Power Solution GmbH Overview of the FSP500-70MPE power supply unit from FSP Power Solution GmbH, a manufacturer of AC/DC power supplies, featuring EAC compliance.
	FSP Group Medical Power Supply UL Compliance Certificate for FSP400-70MPE, FSP500-70MPE, TMPC Series Official Certificate of Compliance from UL Solutions confirming that FSP Group's FSP400-70MPE, FSP500-70MPE, TMPC-400E, and TMPC-500E switching power supplies meet stringent safety standards for medical and dental equipment, including ANSI/AAMI ES60601-1 and CSA C22.2 No. 60601-1.