FSP180-50FEB Flex ATX 180W Power Supply
Technical Datasheet
Product Image
A silver-colored Flex ATX form factor power supply unit with a black fan grille on one side and various connectors on the other. It features a label with the 'FSP' logo and 'FSP180-50FEB' model number.
Key Features
- Certified CB 62368-1 & CB 60950-1
- Meets 80 Plus Bronze certification
- Designed for 5,000 meters above sea level
- High Reliability
- Low Ripple & Noise
- Over Current Protection
- Over Temperature Protection
- Over Voltage Protection
Safety Standard Approvals
CE, FCC, TUV, UL, RoHS
Description
The FSP180-50FEB is a standard Flex form factor switching power supply. It offers a total power capacity of up to 180 Watts, making it ideal for industrial environments. This power supply is a suitable choice for IPC controllers, networking, communication, or other automation applications. The product complies with the latest safety and EMC standards, meeting various worldwide regulations.
General Specifications
- Dimension (L x W x H): 81.5 x 40.50 x 150 mm
- Efficiency: 80 Plus Bronze
- Hold-up time at 100% Load: ≥ 16ms (115V / 60Hz), ≥ 16ms (230V / 50Hz)
- Operating altitude: 5,000 meters above sea level
- Environment:
- Working temperature: 0°C to 50°C
- Storage temperature: -20°C to + 80°C
- Working humidity: 85% RH non-condensing
- Storage humidity: 95% RH non-condensing
- MTBF: 100,000 hours of continuous operation at 25°C, Max. output load
- Applications: Networking, Storage System, IPC Controller
Input Specifications
- Input voltage: 90-264Vac
- Input frequency: 47-63Hz
- Input current: 115Vac @3A, 230Vac @1.5A
Output Rating
| Outputs | +3.3V | +5V | +12V | -12V | +5Vsb |
|---|---|---|---|---|---|
| Max. | 8.0A | 12.0A | 12.0A | 0.3A | 2.0A |
| Min. | 0.0A | 0.0A | 0.05A | 0.0A | 0.0A |
| Regulation | ±5% | ±5% | ±5% | ±10% | ±5% |
| Ripple/Noise | 50 mV | 50 mV | 120 mV | 120 mV | 50 mV |
The +3.3V and +5V total output shall not exceed 61W.
Mechanical Specifications
Unit: mm [inch]
The power supply unit has dimensions of 81.5 mm (width) x 40.5 mm (height) x 150 mm (depth).
The rear panel features a variety of connectors:
- P1: 24-pin ATX main power connector
- P2: 4-pin ATX auxiliary power connector
- P3: 4-pin Molex connector
- P4: 4-pin Berg connector
Mounting holes are present, compatible with 2-6-32 UNC and M3+0.5 Tab standards.
Airflow is indicated to enter from the front and exit from the rear of the unit.
The unit includes a 'SPEC LABEL' and a 'Bar Code' area.
