Product Overview
This manual provides information for the Gyroor H30 Mini Electric-Assisted Scooter.
Important Safety Notice: ⚠️ Please read the operating instructions carefully before riding. Beginners should be accompanied by parents or adults when practicing in open spaces. Operators can ride independently only after mastering the scooter's kinetic energy and riding skills.
The manufacturer reserves the right to make changes to the product and update this manual at any time. For the latest user manual, please visit: www.gyroorboard.com
For news and updates, scan the "Gyroorboard" Messenger QR code.
Contact support via email: support@gyroorboard.com
Follow us on social media: [Facebook @gyroorboard], [Instagram @gyroorboard], [Twitter @gyroorboard]
1. Product Accessories
The package includes the following accessories:
| Attachment | Quantity |
|---|---|
| H30 Mini Electric-Assisted Scooter | 1 |
| Charger | 1 |
| Instruction manual | 1 |
| Spare tool | 1 |
Note: Actual shipment product performance and parameters are subject to change without notice.
The product diagram shows an exploded view of the electric scooter, detailing components such as the Handle tube, Vertical pipe, Front fork, Front wheel, Rear mudguard, Battery, Motor, Lights, and various screws, nuts, and covers, arranged in their respective positions for assembly.
2. Product Installation and Expansion
2.1 Product Installation Diagram
Step 1: Tighten the handle in the indicated direction [arrow].
Step 2: Attach the vertical rod to the bottom plate, aligning it with the screw hole.
Step 3: Secure the connection by tightening the screw.
2.2 Product Expansion Diagram
Step 1: Unscrew the locking mechanism in the indicated direction [arrow].
Step 2: Press the vertical lever to engage the locking marble, then grip the handle and move it up and down to adjust the height.
Step 3: Tighten the height adjustment cap in the indicated direction [arrow] after adjusting the height.
3. Introduction to Riding Operations
Starting Method: Hold the handle with both hands and gently push it forward. A single "drop" sound from the buzzer indicates a speed of 6 KM/H. Three "drops" indicate a speed of 10 KM/H.
Gear Change Mode: After sliding the motor, press the pedal switch 5 times continuously to change gears with different speeds. Successful speed setting is indicated by 1 "drop" at 6 KM/H and 3 "drops" at 10 KM/H.
Automatic Turn Off: The scooter will automatically turn off after 15 seconds of inactivity. To use it again, slide the motor.
Lights: After the motor is started, the lights cycle through colors and then turn off. They turn on again when the induction contact is pressed. When the scooter is started, pressing and releasing the foot switch will cause the buzzer to emit a "drop". If the scooter is not started, the buzzer will not sound.
Riding Method: Hold the handle with both hands. Place one foot on the foot switch and use the other foot to pedal back and accelerate. When the gliding speed reaches approximately 3 KM/H, the scooter will begin to accelerate smoothly to the current gear setting. Maintain a uniform speed.
Stop Method:
- Use one foot to step on the rear wheel brake plate.
- Remove your foot from the foot switch on the pedal to complete the stop.
Low Battery Indication: If the scooter emits a continuous sound of "drops, drops, drops", it indicates the battery is low. Please charge the scooter promptly.
4. Safety Instructions
- This product is a mini electric power-assisted scooter designed for children. It is restricted to one child and should not be used by adults or two people simultaneously. Children must be accompanied by parents or adults when using electric-assisted scooters.
- When riding this product, please wear a safety helmet and other protective equipment.
- Do not ride this product in unsafe or illegal locations, such as motor vehicle lanes.
- Please practice first in open spaces to master the operation before driving.
- Do not perform dangerous maneuvers or ride with one hand while the scooter is running. Keep your feet on the pedal.
- Avoid attempting to cross gaps or steps exceeding 3 cm, as this may cause the scooter to subvert and injure the rider or damage the vehicle. Avoid steps under 3 cm whenever possible.
- When encountering rough or uneven road conditions, please slow down or dismount.
- Users must adjust the product's height to the proper position to ensure safe driving.
- Do not ride this product on slippery surfaces such as those contaminated with oil or ice.
- Do not use this product in temperatures below -5°C.
- Do not use it on slopes exceeding 5 degrees. For slopes over 5 degrees, pedal assist is required.
- Do not immerse the product in water depths above 5 cm to avoid damage to the electrical parts due to water ingress.
- In adverse weather conditions such as rain, snow, and wind, please avoid riding to prevent unnecessary damage.
- If the product is fully charged and not used for at least one month, it must be charged at least once a month. If the battery is completely depleted during riding, it must be charged once every 7 days.
5. Battery and Charger
5.1 Lithium Battery
When you first receive the electric assist scooter, please fully charge the battery before use.
- Please charge immediately after the car emits a low battery warning tone to avoid damage to the battery and affect its performance.
- When the battery is not used for a long time, please charge it at least once a month (when the battery is fully charged).
- If the battery is not used for a long time and its level drops below the battery protection status, it may become unusable. Please contact the dealer promptly.
Note: The battery is not covered by the warranty if it is damaged due to water, collision, or other abnormal factors.
5.2 Charger
The dedicated charger provided by the company has a charging protection function. When the battery reaches 100% charge, it will automatically stop charging. Damage caused by other abnormal factors such as water ingress or collision is not covered by the warranty.
- Open the charging rubber cover on the pedal and insert the charger output connector into the charging hole.
- Plug the charger input power into the power socket (AC100V-240V).
- The charger indicator light is red, indicating that it is charging. When the charger indicator light turns green, the battery is fully charged.
- When charging the battery, please place it in a dry and ventilated environment.
6. The Scope of Warranty
Under normal use, if the parts of our electric assisted scooter experience issues within the warranty period, please contact our company or product distributor for after-sales service.
| Name | Quality Issues | Warranty Period |
|---|---|---|
| Motor | The motor does not work under normal use | 6 months |
| Charger | Charger failure under normal use | 6 months |
| Lithium battery | Battery failure under normal use | 6 months |
| Scooter body structure | Deformation, breakage, etc. that prevent use under normal use | No |
(The above quality problems are covered by free service, with no maintenance fee.)
Note: Please use our products in the correct way. Damage caused by abnormal use is not covered by free maintenance.
During the warranty period, the following reasons for failure mean the damage is not within the scope of quality assurance:
- Improper maintenance and repair not in accordance with this manual.
- Using the electric assist scooter for dangerous actions such as stunts, resulting in damage or malfunction.
- Any disassembly or use of parts other than original factory parts.
- Body and parts damaged by mistakes, traffic accidents, or accidental collisions.
- Incomplete label, water ingress, or part number mismatch.
- Damage or malfunction caused by riding on abnormal roads.
- Commercial rental or improper use.
- Damage caused by irresistible natural disasters.
- Exposure of this product to the sun for extended periods or prolonged rain, causing rapid aging and failure of the product.
7. Package Attachment
The package includes the following items:
| Attachment | Quantity |
|---|---|
| H30 Mini Electric-Assisted Scooter | 1 |
| Charger | 1 |
| Instruction manual | 1 |
| Spare tool | 1 |
Note: Actual shipment product performance and parameters are subject to change without notice.
8. Parameters
| Parameter | Value |
|---|---|
| Color | Black/blue/Red |
| Speed | 6-10KM/H (When speed reaches 6-10KM/H, it will run at a constant speed) |
| Maximum grade | 5° |
| Battery | 21.6V, 2.5 AH |
| Motor | 3.5 inch, 80W |
| Max loading | 50KG |
| Maximum running distance | 5-10KM |
| Scooter size | 70*34*74/80/86CM |
| Pedal distance from the ground | 8CM |
| Scooter-body ground clearance | 4.5CM |
| Net Weight/Gross Weight | 4.2/5.5KG |
| Color Options | Black, Blue, Red |
9. Contact Information
Contact Gyroor if you experience issues relating to riding, maintenance, safety, or errors/faults with the scooter.
Messenger: Gyroor (scan the QR code for updates)
E-mail Service: support@gyroorboard.com
Social Media: [Facebook @gyroorboard], [Instagram @gyroorboard], [Twitter @gyroorboard]
Website: www.gyroorboard.com
Please have your order number on hand when contacting Gyroor.
Learn more news about the Gyroor hoverboard by scanning the "Gyroorboard" Messenger QR code.
