MPS Series Manual Projector Screen

Product Description

A range of manually operated large format projector screens. The screen can be pulled down to the desired level and set by the auto lock function. When not in use, the screen retracts back into the housing smoothly when the lock is released via the integral spring mechanism. The screen is housed in a white steel case with mounting brackets on either end, allowing installation onto ceilings or walls. The screen itself has a weighted bottom bar to prevent the screen jamming in the case or curling. Various sizes are available for all types of installation such as classrooms, auditoriums, or places of worship.

Features

• Black border enhances the definition of the projected image.
• Flame retardant and mildew proof.
• Smooth lock & release mechanism.
• Available in 1:1 and 4:3 formats.

Installation

This projector screen is suitable for both wall and ceiling mounting. It is important that the unit is installed accurately using a spirit level to ensure the screen can operate correctly and safely.

Wall Mounting

[Illustration of a projector screen roller mechanism mounted to a wall, showing mounting brackets, the pull-down screen, and a weighted bottom bar.]

Ceiling Mounting

[Illustration of a projector screen roller mechanism suspended from a ceiling, showing mounting brackets, the pull-down screen, and a weighted bottom bar.]

Operation

To Open

Pull the screen down gently until the desired drop is achieved. Hold for a moment for the auto-lock to activate.

To Close

Pull the screen down slightly to release the lock and allow the screen to retract back into the unit slowly. Do not release suddenly, as this may cause damage to the unit.

Warning

• Do not use this screen if you find that it is damaged in any way.
• Do not attempt to repair this unit or take it apart under any circumstances, as this will invalidate your warranty.