Rough Country Honda Talon 2019-2024 Rear Cargo Box
Installation Guide
Introduction
Thank you for choosing Rough Country for your vehicle needs. Please read these instructions before beginning installation. Verify all parts against the kit contents shown below, ensuring you have all necessary components and understand their placement.
For questions, please contact Rough Country at 1-800-222-7023. We are happy to assist with any product inquiries. Ensure all fasteners are torqued correctly and check for adequate clearance between components. Periodically verify hardware tightness.
Kit Overview
Kit Contents:
- Cargo Box x1
Tools Needed:
- 4mm Allen Wrench
- 5mm Allen Wrench
Hardware Included:
- 6mm x 1.0 x 50mm Bolts x4
- 6mm Flat Washers x4
Torque Specifications
| Size | Grade 5 | Grade 8 | Size | Class 8.8 | Class 10.9 | |
|---|---|---|---|---|---|---|
| 5/16" | 15 ft/lbs | 20 ft/lbs | 6MM | 5 ft/lbs | 9 ft/lbs | |
| 3/8" | 30 ft/lbs | 35 ft/lbs | 8MM | 18 ft/lbs | 23 ft/lbs | |
| 7/16" | 45 ft/lbs | 60 ft/lbs | 10MM | 32 ft/lbs | 45 ft/lbs | |
| 1/2" | 65 ft/lbs | 90 ft/lbs | 12MM | 55 ft/lbs | 75 ft/lbs | |
| 9/16" | 95 ft/lbs | 130 ft/lbs | 14MM | 85 ft/lbs | 120 ft/lbs | |
| 5/8" | 135 ft/lbs | 175 ft/lbs | 16MM | 130 ft/lbs | 165 ft/lbs | |
| 3/4" | 185 ft/lbs | 280 ft/lbs | 18MM | 170 ft/lbs | 240 ft/lbs | |
Installation Instructions
Remove the bolts in the bed floor. Ensure that the bed floor is clean of any dirt or foreign objects. Refer to Photo 1 Description.
Photo 1 Description: An image of the UTV's rear cargo bed floor, with several white arrows indicating the locations of bolts to be removed.
Remove the two bolts from the driver's side bed floor using a 5mm Allen wrench. Refer to Photo 2 Description.
Photo 2 Description: A hand is shown using a 5mm Allen wrench to loosen a bolt in the UTV's bed floor. Arrows highlight the two bolts to be removed on the driver's side.
Remove the two bolts from the passenger's side bed floor using a 5mm Allen wrench. Refer to Photo 3 Description.
Photo 3 Description: An image of the passenger side of the UTV's bed floor, with arrows pointing to the two bolts that need to be removed.
Place the Cargo Box into the rear of the UTV. Then open the lid using the twist lock latches. Refer to Photo 4 Description.
Photo 4 Description: The Rough Country Cargo Box is shown being positioned in the rear of the UTV. The cargo box lid is open, revealing the twist lock latches.
Align the four holes in the bottom of the cargo box with the bed floor holes. Secure the cargo box to the UTV using the supplied hardware in each mounting hole. Install one Flat washer and one Button head bolt, and tighten using a 4mm Allen Wrench. Refer to Photos 5 and 6 Descriptions.
Photo 5 Description: A close-up view shows a 4mm Allen wrench being used to tighten a bolt through one of the cargo box's mounting holes into the UTV bed floor. A flat washer is visible.
Photo 6 Description: Another close-up view illustrating the process of securing the cargo box, showing the supplied hardware (bolt and washer) and the use of a 4mm Allen wrench for tightening.
Disclaimer
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applicable, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buyer's responsibility to comply with all Federal, State and Local laws governing the sales of any items listed, illustrated or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.
