Moulures Keva et accessoires de finition

2.2.1 Angles intérieurs (Variasouple ™ sauf réf. 11402)

Diagrams show an interior angle piece for Keva trunking. One diagram illustrates its use for trunking sections up to 32x15mm, and another for sections from 50x15mm onwards. Dimensions of 15mm and 30mm are indicated for the overlap area.

Function: Joins two trunking pieces at an interior angle, avoiding miter cuts, maintaining IP rating, and improving aesthetics by covering cuts without significant protrusion. Mounts by clipping onto the trunking. Allows for interior angles of +/-7° (fixed for 11402).

Colors: Blanc or brun.

2.2.2 Angles extérieurs (Variasouple ™ sauf réf. 11403)

Diagrams show an exterior angle piece for Keva trunking. Similar to interior angles, one diagram illustrates its use for trunking sections up to 32x15mm, and another for sections from 50x15mm onwards. Dimensions of 15mm and 30mm are indicated for the overlap area.

Function: Joins two trunking pieces at an exterior angle, avoiding miter cuts, maintaining IP rating, and improving aesthetics by covering cuts without significant protrusion. Mounts by clipping onto the trunking. Allows for exterior angles of +/-7° (fixed for 11403).

Colors: Blanc or brun.

2.2.3 Angles plats

Diagrams show a flat angle piece for Keva trunking. One diagram illustrates its use for trunking sections up to 32x15mm, and another for sections from 50x15mm onwards.

Function: Joins two trunking pieces at a flat angle (90°), avoiding miter cuts, maintaining IP rating, and improving aesthetics by covering cuts. Mounts by clipping onto the trunking.

Colors: Blanc or brun.

2.2.4 Embouts

Diagrams show end caps for Keva trunking. One diagram illustrates their use for trunking sections up to 32x15mm, and another for sections from 50x15mm onwards. The diagrams show the end cap fitting onto the profile end.

Function: Closes off the end of the trunking profile, maintaining IP rating and improving aesthetics. Can be fixed with glue (not supplied) for better hold, mounted on the profile from the front or side. Mounts onto the trunking by clipping and screwing.

Colors: Blanc or brun.

2.2.5 Joints de couvercle recouvrants

Diagram shows a cover joint piece. It illustrates how the joint connects two cover pieces end-to-end.

Function: Joins two cover pieces end-to-end, maintains IP rating, and improves aesthetics by covering the joint. Mounts by clipping onto the trunking profile base and gluing onto one cover (glue not supplied).

Colors: Blanc or brun.

2.2.6 Dérivations moulure d'angle 30x30

Diagram shows a derivation piece for a 30x30mm angle trunking. It illustrates how it connects three trunking sections and an angle trunking.

Function: Allows derivation on 3 different axes for two trunking sections and one 30x30mm angle trunking. Maintains IP rating and improves aesthetics by covering cuts. Mounts by clipping onto the trunking profile base. Color: Blanc.

2.2.7 Dérivations en Té

Diagram shows a T-junction derivation piece (ref. 11527) for Keva trunking. It illustrates how it connects three trunking sections in a T-shape.

Function: Joins three trunking sections in a T-junction. Maintains IP rating and improves aesthetics by covering cuts. Mounts by clipping onto the trunking profile base. Color: Blanc.

2.2.8 Té de dérivation 3D

Diagrams show a 3D T-derivation piece. It illustrates how it connects three trunking sections at different axes.

Function: Allows derivation on 3 different axes for three trunking sections. Maintains IP rating and improves aesthetics by covering cuts. Mounts by clipping onto the trunking profile base. Color: Blanc.

2.2.9 Boîte de dérivation

Diagrams show a junction box. One diagram illustrates its use for derivations on 4 faces. Another shows internal dimensions and mounting features. It has a grid inside that accepts screws (min Ø3, max Ø). Pre-cut frames inside match trunking heights and widths. Maintains IP rating.

Function: Allows derivation on all 4 faces of the box. Compatible with trunking heights and widths. Maintains IP rating.

Colors: Blanc or brun.

2.2.10 Kits de chantier

Construction kits group essential Keva system accessories into a single box.

• Kit chantier 22x12 réf 11801: Includes 15 interior angles (11502), 5 exterior angles (11503), 15 flat angles (11504), 5 end caps (11505), 5 cover joints (11573), 4 T-derivations (11507).
• Kit chantier 32x12 réf 11803: Includes 15 interior angles (11522), 5 exterior angles (11523), 15 flat angles (11524), 5 end caps (11525), 10 cover joints (11575), 4 T-derivations (11527).
• Kit chantier 32x15 réf. PW11806: Includes 10 interior angles (11542), 5 exterior angles (11543), 10 flat angles (11544), 5 end caps (11545), 5 cover joints (11576), 2 T-derivations (11547).
• Kit chantier 50x20 réf 11805: Includes 4 interior angles (11582), 2 exterior angles (11583), 6 flat angles (11584), 4 end caps (11585), 6 cover joints (11578), 2 T-derivations (11587).

A photograph shows the contents of these kits, featuring various white plastic accessory pieces.

2.2.11 Flixo

Diagram shows the Flixo accessory, a clip-on device for trunking. It features an insulated steel pin and a wire retention pad.

Function: Allows derivation on the 4 faces of the trunking.

2.2.12 Moulure DCL référence 11640

Diagram shows a DCL trunking profile with dimensions 32x8mm and length 2.10m. It indicates fixing methods like gluing, screws, and wall plugs.

Function: Allows connection for lighting elements or for routing to a switch. Can be fixed by gluing, using wall plugs, or screws/nails. The body and cover clip together and can be detached with a tool. IP40 rated and shock resistant to 2 Joules.

Color: Blanc.

Length: 2.10m.

Dimensions: 32 x 8 mm.

2.2.13 Boite DCL référence 11643

Diagrams show a DCL box. One shows it mounted on a ceiling with a luminaire attached. Another shows its dimensions (100mm diameter, 40mm height) and components like the mounting plate, finish piece, hook, and connector. It is compatible with DCL trunking (ref. 11640) and 22x12/32x12mm trunking. It can support 25kg with appropriate fixings.

Function: Allows connection to a luminaire. Mounts onto the ceiling via a plate, with the finish piece clipping on. Maintains IP rating and improves aesthetics. Offers easier wiring access and offset connection point. Requires a 102mm diameter hole saw for installation.

Color: Blanc.